To include the effect of external pressurization in hybrid gas bearings an extra term is added to Reynolds Equation to accommodate the gas jet. Two cases are considered: cylindrical and annular flow profiles. Validation of theoretical results obtained using the modified version of Reynolds equation for compressible fluid against computational fluid dynamics (CFD) model is presented in terms of pressure and flow rate considering pressurization levels, journal eccentricities and angular velocities. Correction factors for the jet discharge coefficients are necessary and calculated added by CFD model. By introducing such coefficients into the modified Reynolds equation, good agreement with experiments is achieved in terms of journal equilibrium position and resulting aerodynamic forces.
VleugelsPWaumansTPeirsJ. High-speed bearings for micro gas turbines: stability analysis of foil bearings. J Micromech Microeng2006; 16(9): 282–289.
2.
Fleming DP, Cunningbum RE and Anderson WJ. Stability analysis for unloaded externally pressurized gas-lubricated bearings with journal rotation. NASA Report 1968; (December); 1–33.
3.
HamrockBJ. Fundamentals in fluid film lubrication, New York: McGraw-Hill, 1994.
4.
WadhwaSSSinhasantRSinghDV. Analysis of orifice compensated externally pressurized gas bearings. Tribol Int1983; 16: 203–211.
5.
KazimierskiJTrojnarskiZ. Investigations of externally pressurized gas bearings with different feeding systems. J Lubric Technol1980; 102(1): 5964–5964.
6.
BelforteGRaparelliTViktorovV. Discharge coefficients of orifice-type restrictor for aerostatic bearings. Tribol Int2007; 40(3): 512–521.
7.
ChenCHTsaiTHYangDW. The comparison in stability of rotor-aerostatic bearing system compensated by orifices and inherences. Tribol Int2010; 43(8): 1360–1373.
8.
OsborneDASan AndresL. Experimental response of simple gas hybrid bearings for oil-free turbomachinery. J Eng Gas Turbines Power2006; 128(3): 626–633.
9.
MoriHMiyamatsuY. Theoretical flow-models for externally pressurized gas bearings. J Lubric Technol1969; 91: 181–193.
10.
KassabSZNoureldeenEMShawkyMA. Effects of operating conditions and supply hole diameter on the performance of a rectangular aerostatic bearing. Tribol Int1997; 30(7): 533–554.
11.
LundJW. Calculation of stiffness and damping properties of gas bearings. J Lubric Technol1968; 90(4): 793–803.
12.
ZhangRQChangHS. A new type of hydro-static/hydrodynamic gas journal bearing and its optimization for maximum stability. Tribol Trans1995; 38: 589–594.
13.
KimTHSan AndresL. Effect of side feed pressurization on the dynamic performance of gas foil bearings: a model anchored to test data. J Eng Gas Turbines Power2009; 131(1): 012501–012501.
14.
Amine HassiniMArghirMFrocotM. Comparison between numerical and experimental dynamic coefficients of a hybrid aerostatic bearing. J Eng Gas Turbines Power2012; 134(12): 122506–122506.
15.
RudloffLArghirMBonneauO. Experimental analysis of the dynamic characteristics of a hybrid aerostatic bearing. J Eng Gas Turbines Power2012; 134(8): 082503–082503.
16.
HowardSA. Misalignment in gas foil journal bearings: an experimental study. J Eng Gas Turbines Power2009; 131(2): 022501–022501.
17.
SongJHKimD. Foil gas bearing with compression springs: analyses and experiments. J Tribol2007; 129(3): 628–639.
18.
ZhuXSan AndresL. Rotordynamic performance of flexure pivot hydrostatic gas bearings for oil-free turbomachinery. J Eng Gas Turbines Power2007; 129(4): 1020–1027.
19.
Al-JughaimanBChildsD. Static and dynamic characteristics for a pressure-dam bearing. J Eng Gas Turbines Power2008; 130(5): 859–867.
20.
San AndresLRyuK. Hybrid gas bearings with controlled supply pressure to eliminate rotor vibrations while crossing system critical speeds. J Eng Gas Turbines Power2008; 130(6): 062505–062505.
21.
San AndresL. Turbulent hybrid bearings with fluid inertia effects. Tribol Int1990; 112: 699–707.
22.
MorosiSSantosIF. On the modelling of hybrid aerostatic-gas journal bearings. Proc IMechE, Part J: J Engineering Tribology2011; 225(7): 641–653.
23.
Morosi S and Santos IF. Experimental investigations of active air bearings. In: Proceedings of ASME turbo expo. Copenhagen, Denmark, 11--15 June 2012, paper No. GT2012-68766, pp.901--910. New York: ASME.
24.
MorosiSSantosIF. Active lubrication applied to radial gas journal bearings. Part 1: Modeling. Tribol Int2011; 44(12): 1949–1958.
25.
CerdaANielsenBBSantosIF. Steady state characteristics of a tilting pad journal bearing with controllable lubrication: comparison between theoretical and experimental results. Tribol Int2013; 58: 8597–8597.
26.
HorvatFEBraunMJ. Comparative experimental and numerical analysis of flow and pressure fields inside deep and shallow pockets for a hydrostatic bearing. Tribol Trans2011; 54(4): 548–567.
