In this study, plain iron powder (ASC.100.29) was mixed with 0.35–1.1 % graphite + 3 % Si + 2 % Ni and 0.35–1.1 % graphite + 3 % Si + 2 % Mn powders. While coarse pearlitic structure with homogeneous distribution of Mn was obtained in Mn-added specimens, Ni-rich austenitic areas with divorced pearlite structure were observed in Ni-added specimens. Wear tests were carried out at a load of 50 N. The experimental results showed that the highest wear resistance was obtained in the Ni-added specimen. While subsurface brittle cracking caused more wear in the Mn-added specimens, the wear occured by plastic deformation of surface Ni-added specimens.
GethingB. A.HeaneyD. F.KossD. A.MuellerT. J.The effect of nickel on the mechanical behavior of molybdenum P/M steels. Mat. Sci. Eng., 2005, A390, 19–26.
2.
AntónN.DelgadoJ. L.VelascoF.TorralbaJ. M.Influence of alloying element additions on tribological behaviour of sintered steels with high content in manganese–nickel. J. Mater. Process. Technol., 2003, 143–144, 475–480.
3.
Capus, J. M. Ferrous producers getting harder. Metal Powder Report, PM2TEC'99, 20–24 June 1999, MPIF 12--14.
4.
Drudova, E., Parilak, L., Kavatova, M., and Kosc, E. In Proceedings of the Second International Conference on Powder metallurgy, RoPM, Romania, vol. 2, 2002, p. 753.
5.
ZhangZ.SandströmR.Fe–Mn–Si master alloy steel by powder metallurgy processing. J. Alloys Compd., 2004, 363, 194–202.
6.
NarasimhanK. S.Sintering of powder mixtures and the growth of ferrous powder metallurgy. Mater. Chem. Phys., 2001, 67, 56–65.
7.
SimchiA.DanningerH.Effects of porosity on delamination wear behaviour of sintered plain iron. Powder Metall., 2004, 47(1), 73–80.
8.
Tekeli, S. and Güral, A. Wear behaviour of powder metallurgy processed dual phase composite steels. In Proceedings of the 12th International Conference on Composites/nano engineering, ICCE-12, Tenerife, Spain, 1--6 August 2005.
9.
DhanasekaranD.GnanamoorthyR.Dry sliding friction and wear characteristics of Fe-C-Cu alloy containing molybdenum disulphide. Mater. Design, 2007, 28(4), 1135–1141.
LisJ.MorgielJ.LisA.The effect of Mn partitioning in Fe-Mn-Si alloy investigated with STEM-EDS techniques. Mater. Chem. Phys., 2003, 81, 466–468.
12.
CamposM.SanchezD.TorralbaJ. M.Sintering behaviour improvement of a low Cr–Mo prealloyed powder steel through Mn additions and others liquid phase promoters. J. Mater. Process. Technol., 2003, 143–144, 464–469.
13.
ZhangH.GermanR. M.Homogeneity and properties of injection moulded Fe-Ni alloys. Met. Powder Rep., 2001, 56, 18–22.
14.
Šalak, A. and Selecká, M. Mechanical and friction properties of sintered (1–5)% manganese steel. In Proceedings of the 3rd International Powder Metallurgy Conference, Turkish Powder Metallurgy Association, Ankara, Turkey, 4–8 September 2002, pp. 230--246.
15.
Special Feature. Fine nickel improves part performance in high-stress areas. Met. Powder Rep., 2005, 60, 16–19.
16.
CandelaN.AntonN.GordoE.VelascoF.TorralbaJ. M.Mechanical properties and wear behaviour of nitrided Fe-3.5Mo base sintered steels. Mater. Sci. Tech. Lond., 2001, 17, 309–314.
17.
SudhakarK. V.SampathkumaranP.DwarakadasaE. S.Dry sliding wear in high density Fe-2%Ni based P/M alloys. Wear, 2000, 242, 207–212.
18.
SuhN. P.Delamination theory of wear. Wear, 1973, 25, 111–124.
