Providing a computationally derived,mechanically optimised target correction during preoperative planning can improve joint contact mechanics of hip dysplasia treated with periacetabular osteotomy

Abstract

Aim:

Preoperative identification of acetabular corrections that optimally improve joint stability and reduce elevated contact stresses could further reduce osteoarthritis progression in patients with hip dysplasia who are treated with periacetabular osteotomy (PAO). The purpose of this study was to investigate how providing patient-specific, mechanically optimal acetabular reorientations to the surgeon during preoperative planning affected the surgically achieved correction.

Methods:

Preoperative CT scans were used to create patient-specific hip models for 6 patients scheduled for PAO. A simulated acetabular fragment was extracted from the preoperative pelvis model and computationally rotated to simulate candidate acetabular reorientations. For each candidate, discrete element analysis was used to compute contact stresses during walking, which were summed over the gait cycle and scaled by patient age to obtain chronic contact stress-time exposure. The ideal patient-specific reorientation was identified using a cost function that balances minimising chronic stress exposures and achieving surgically acceptable acetabular coverage angles. The optimal reorientation angles and associated contact mechanics were provided to the surgeon preoperatively. After PAO was performed, a model of the surgically achieved correction was created from a postoperative CT scan. Radiographic coverage and contact mechanics were compared between preoperative, optimal, and surgically achieved orientations.

Results:

While surgically achieved reorientations were not significantly different from optimal reorientations in radiographically measured lateral (p = 0.094) or anterior (p = 0.063) coverage, surgically achieved reorientations had significantly (p = 0.031) reduced total contact area compared to optimal reorientations. The difference in lateral coverage and peak chronic exposure between surgically achieved and optimal reorientations decreased with increasing surgeon experience using the models (R² = 0.758, R² = 0.630, respectively).

Conclusions:

Providing hip surgeons with a patient-specific, computationally optimal reorientation during preoperative planning may improve contact mechanics after PAO, which may help reduce osteoarthritis progression in patients with hip dysplasia.