This study aims to enhance the impact damage resistance of 3D spacer woven composites. The novelty of this study is tailoring both core cell geometry and face sheet architecture of 3D spacer woven composites. The 3D square spacer composites exhibited superior impact resistance compared to the 3D triangular spacer composites at both 20 J and 40 J energy levels. This behaviour was attributed to the increased resilience and more flexible response of the 3D square spacer core structure. The impact resistance of the 3D spacer composites also increased with the reinforcement of 2D woven composites. The lowest deformation was achieved for the composites reinforced with satin 2D woven composites, which was related to the higher stiffness provided by the low-crimp satin weave under impact load, compared to the plain and twill weaves.
VaidyaASVaidyaUKUddinN. Impact response of three-dimensional multifunctional sandwich composite. Mater Sci Eng, A2008; 472: 52–58. https://doi.org/10.1016/j.msea.2007.03.064
3.
TangZCaiDWangX. Mechanical behavior of 3D integrated woven spacer composites under double low-velocity impacts. Mech Adv Mater Struct2025; 33: 109450. https://doi.org/10.1080/15376494.2025.2578832
4.
ChenJLiuYHouJ, et al.On low-velocity impact properties of 3D woven integrated double-spacer sandwich composites. J Fail Anal Prev2025; 25: 163–177. https://doi.org/10.1007/s11668-024-02082-7
5.
LiMWangSZhangZ, et al.Effect of structure on the mechanical behaviors of three-dimensional spacer fabric composites. Appl Compos Mater2009; 16: 1–14. https://doi.org/10.1007/s10443-008-9072-4
6.
YangXZhengLChenL, et al.Enhanced impact resistance of three-dimensional woven composites with double-layer core structure. Polym Compos2023; 44: 2569–2580. https://doi.org/10.1002/pc.27264
7.
DincerMKarciEHalil SahinI, et al.Effect of linear density on the mechanical properties of 3D spacer composites with improved manufacturing quality. Compos Struct2023; 323: 117518. https://doi.org/10.1016/j.compstruct.2023.117518
8.
MouritzasAPLeongbKHHerszbergcI. A review of the effect of stitching on the in-plane mechanical properties of fibre-reinforced polymer composites. Composites Part A: Applied Science and Manufacturing1997; 28: 979–991.
9.
MaschinenwesenF. Development of the weaving machine and 3D woven spacer fabric structures for lightweight composites materials. Polymers (Basel)2021; 13(20): 3535.
10.
HassanzadehSHasaniHZarrebiniM. Thermoset composites reinforced by innovative 3D spacer weft-knitted fabrics with different cross-section profiles: materials and manufacturing process. Compos Part A Appl Sci Manuf2016; 91: 65–76. https://doi.org/10.1016/j.compositesa.2016.09.017
11.
ChenXWangH. Modelling and computer-aided design of 3D hollow woven reinforcement for composites. J Textil Inst2006; 97: 79–87. https://doi.org/10.1533/joti.2005.0215
FanHZhaoLChenH, et al.Ductile deformation mechanisms and designing instructions for integrated woven textile sandwich composites. Compos Sci Technol2012; 72: 1338–1343. https://doi.org/10.1016/j.compscitech.2012.04.017
14.
NejeGBeheraBK. Lateral compressive properties of spacer fabric composites with different cell shapes. Appl Compos Mater2018; 25: 725–734. https://doi.org/10.1007/s10443-018-9729-6
15.
NejeGBeheraBK. Comparative analysis of mechanical behavior of 3D woven spacer sandwich composites with single and double level structures. Polym Compos2020; 41: 4885–4898. https://doi.org/10.1002/pc.25760
16.
KambleZMishraRKBeheraBK, et al.Design, development, and characterization of advanced textile structural hollow composites. Polymers; 13: 3535. https://doi.org/10.3390/polym13203535
17.
Failure analysis of 3D woven spacer sandwich composites with woven cross-links and face sheet thickening under compressive and flexural loading - ghanshyam neje. Bijoya Kumar Behera2021; 148: 058.
18.
ManjunathRNKhatkarVBeheraBK. Influence of augmented tuning of core architecture in 3D woven sandwich structures on flexural and compression properties of their composites. Adv Compos Mater2020; 29: 317–333. https://doi.org/10.1080/09243046.2019.1680925
19.
GeerinckRDe BaereIDe ClercqG, et al.One-shot production of large-scale 3D woven fabrics with integrated prismatic shaped cavities and their applications. Mater Des; 165: 107578. https://doi.org/10.1016/j.matdes.2018.107578
20.
MountasirAHoffmannGCherifC, et al.Development of non-crimp multi-layered 3D spacer fabric structures using hybrid yarns for thermoplastic composites. Procedia Mater Sci2013; 2: 10–17. https://doi.org/10.1016/j.mspro.2013.02.002
HaytaNKayaG. Experimental investigation on impact response of sandwich composites integrated with a novel 3D multi-layer stitched core. Compos Struct2022; 296: 115888. https://doi.org/10.1016/j.compstruct.2022.115888
23.
RahmanMBZhuL. Low-velocity impact response on glass fiber reinforced 3D integrated woven spacer sandwich composites. Materials2022; 15: 15062311. https://doi.org/10.3390/ma15062311
24.
IftekharHUmairMHamdaniSTA, et al.Effect of hybrid weave patterns on the mechanical performance of woven fabrics. J Nat Fibers; 20: 2145411. https://doi.org/10.1080/15440478.2022.2145411
25.
LiDSZhaoCQJiangN, et al.Fabrication, properties and failure of 3D integrated woven spacer composites with thickened face sheets. Mater Lett2015; 148: 103–105. https://doi.org/10.1016/j.matlet.2015.02.058
26.
PengJCaiDQianY, et al.Low-velocity impact and compression after impact behavior of 3D integrated woven spacer composites. Thin-Walled Struct; 177: 109450. https://doi.org/10.1016/j.tws.2022.109450
27.
ZhangMWangXLiuS, et al.Effects of face sheet structure on mechanical properties of 3D integrated woven spacer composites. Fibers Polym2020; 21: 1594–1604. https://doi.org/10.1007/s12221-020-9908-6
28.
XiaFYuTXDurandetY, et al.Triangular corrugated sandwich panels under longitudinal bending. Thin-Walled Struct; 169: 108359. https://doi.org/10.1016/j.tws.2021.108359
