In this study the effects of moisture ingression on the impact damage resistance and damage tolerance of NextelTM610/alumina-silicate ceramic matrix composites were experimentally evaluated. Thin and thick composite laminates with balanced and symmetric layups were placed inside an environmental chamber at 80°C and 85% relative humidity till moisture saturation was reached. The laminates were then subjected to low velocity impacts using a hemispherical steel impactor at energy levels of 2.5 J and 10 J for the thin and thick laminates, respectively. This resulted in similar damage depths on the impactor side between the two sets of laminates. The resultant damage was characterized non-destructively with the damage metrics of external dent area, dent depth and planar internal damage area quantitatively determined. Impacted laminates were subject to in-plane compression loading and the residual strengths were evaluated. Planar internal damage area was larger for the moisture exposed laminates in comparison to their pristine counterparts for both the thin and thick laminates. Also, larger internal damage area resulted in lower compression-after-impact strength and thus, less damage tolerant laminates. This was true for the pristine and moisture exposed cases for both the laminate thicknesses.
AnsonDRichersonDW. The benefits and challenges of the use of ceramics in gas turbines. In: van RoodeMFerberMKRichersonDW (eds) Ceramic gas turbine component development and characterization. New York: ASME Press, 2002.
2.
SchafrikRSpragueR. Saga of gas turbine materials: Part III. Adv Mater Process2004; 162: 27–30.
3.
SprietP. CMC applications to gas turbines. In: BansalNPLamonJ (eds) Ceramic matrix composites, materials, modeling and technology. Hoboken: John Wiley & Sons, 2015, pp. 593–608.
4.
KarandikarPGEvansGWongS, et al.A review of ceramics for armor applications. In: Advances in ceramics armor IV: ceramic engineering and science. Wiley-American Ceramic Society, 2009, Vol. 29(6), pp. 163–175.
5.
GlassDE. Ceramic matrix composite (CMC) thermal protection system (TPS) and hot structures for hypersonic vehicles. In Proceedings of the 15th AIAA international space planes and hypersonic systems and technologies conference, Dayton, OH, 28 April–01 May 2008.
6.
LangeFFTuWCEvansAG. Processing of damage-tolerant, oxidation-resistant ceramic matrix composites by a precursor infiltration and pyrolysis method. Mater Sci Eng A1995; A195: 145–150.
7.
LunderbergREckerbomL. Design and processing of all-oxide composites. In: EvansAGNaslainRG (eds) High-temperature ceramic–matrix composites II: manufacturing and materials development. American Ceramic Society, 1995. pp. 95–104.
ZawadaLPStaehlerJSteelS. Consequence of intermittent exposure to moisture and salt fog on the high-temperature fatigue durability of several ceramic-matrix composites. J Am Ceram Soc2003; 86(8): 1282–1291.
10.
LarochelleKJMorscherGN. Tensile stress rupture behavior of a woven ceramic matrix composite in humid environments at intermediate temperature - Part I. Appl Compos Mater2006; 13: 147–172.
11.
SabelkinVZawadaLMallS. Effects of combustion and salt-fog exposure on fatigue behavior of two ceramic matrix composites and a superalloy. J Mater Sci2015; 50: 5204–5213.
12.
Ruggles-WrenMBMallSEberCA, et al.Effects of steam environment on high-temperature mechanical behavior of NextelTM720/alumina (N720/A) continuous fiber ceramic composite. Compos Part A: Appl Sci Manuf2006; 37: 2029–2040.
13.
Ruggles-WrennMBBraunJC. Effects of steam environment on creep behavior of NextelTM720/alumina ceramic composite at elevated temperature. Mater Sci Eng A2008: 497: 101–110.
14.
Ruggles-WrennMBLanserRL. Tension-compression fatigue of an oxide/oxide ceramic composite at elevated temperature. Mater Sci Eng A2016; 659: 270–277.
15.
ArmaniCJRuggles-WrennMBHayRS, et al.Creep and microstructure of NextelTM 720 fiber at elevated temperature in air and in steam. Acta Mater2013; 61: 6114–6124.
16.
MehrmanJMRuggles-WrennMBBaekSS. Influence of hold times on the elevated-temperature fatigue behavior of an oxide–oxide ceramic composite in air and in steam environment. Compos Sci Technol2007; 67: 1425–1438.
17.
SinghAKKahleKJamesH, et al.Environmental effects on the strength and impact damage resistance of alumina-based oxide/oxide ceramic matrix composites. Ceramics Int2021; 47(12): 17268–17275.
18.
OrtegaBKittBSinghAK, et al.Thermal shock effects on the impact resistance, tolerance and flexural strength of alumina-based oxide/oxide ceramic matrix composites. Ceramics Int2021; 48(3): 3544–3553.
19.
KedirNFaucettDSanchezL, et al.Foreign object damage in an oxide/oxide ceramic matrix composite under prescribed tensile loading. J Eng Gas Turbines Power2017; 139: 1–8.
20.
ChoiSR. Foreign object damage phenomenon by steel ball projectiles in a SiC/SiC ceramic matrix composite at ambient and elevated temperatures. J Am Ceram Soc2008; 91(9): 2963–2968.
21.
ChoiSRFaucettDCAlexanderDA. Foreign object damage by spherical steel projectiles in an N720/alumina oxide/oxide ceramic matrix composite. J Am Ceram Soc2014; 97(12): 3926–3934.
22.
ChoiSRAlexanderDJKowalikRW. Foreign object damage in an oxide/oxide composite at ambient temperature. J Eng Gas Turbines Power2009; 131(2): 1–8.
23.
YashiroSOgiKOshitaM. High-velocity impact damage behavior of plain-woven SiC/SiC composites after thermal loading. Composites Part B2012; 43(3):1353–1362.
24.
PresbyMJMansourRManigandanK, et al.Characterization and simulation of foreign object damage in curved and flat SiC/SiC ceramic matrix composites. Ceramics Int2019; 45(2A): 2635–2643.
25.
SinghAKMallS. Tensile and fatigue behavior of oxide/oxide ceramic matrix composite with simulated foreign object damage in combustion environment. Int J Appl Ceram Technol2017; 15: 1–12.
26.
AX-7810-610 Oxide-Oxide Ceramic Matrix Composite (CMC) Technical Processing Guide 2022, Axiom Materials, Inc., CA, USA.
27.
ASTM Standard D7137/D7137M-17. Standard test method for compressive residual strength properties of damaged polymer matrix composite plates. ASTM International, West Conshohocken, PA, 2017.
28.
ASTM Standard D5229/D5229M-20. Standard test method for moisture absorption properties and equilibrium conditioning of polymer matrix composite materials. ASTM International, West Conshohocken, PA, 2020.
29.
ASTM Standard D7136/D7136M-15. Standard test method for measuring the damage resistance of a fiber-reinforced polymer matrix composite to a drop-weight impact event. ASTM International, West Conshohocken, PA, 2015.
30.
ASTM C1358-18. Standard test method for monotonic compressive strength testing of continuous fiber-reinforced advanced ceramics with solid rectangular cross section test specimens at ambient temperatures. ASTM International, West Conshohocken, PA, 2018.
31.
RasbandWS. ImageJ. U. S. National Institutes of Health, Bethesda, MD, USA. https://imagej.nih.gov/ij/, 1997–2018.
