This article deals with theoretical modeling of the local buckling in foam–core sandwich panels. This phenomenon is considered mainly in the periodic (unbounded wrinkle wave) and linearly elastic formulation. The analytical solutions are in agreement with results of finite element analysis and can be applied with a good precision for many finite-size panels, as well as for many sandwiches having honeycomb cores.
BirmanV. Dynamic wrinkling in sandwich beams. Composites Part B2004; 35: 665–672.
9.
FrostigYSimitsesGJ. Similitude of sandwich panels with a ‘soft’ core in buckling. Composites Part B2004; 35: 599–608.
10.
GrenestedtJLDanielssonM. Elastic-plastic wrinkling of sandwich panels with layered cores. J Appl Mech2005; 72: 276–281.
11.
KardomateasGA. Wrinkling of wide sandwich panels/beams with orthotropic phases by an elasticity approach. J Appl Mech2005; 72: 818–825.
12.
Pei GuAsaroRJ. Wrinkling of sandwich polymer matrix composite panels under transverse thermal gradients. Fire Safety Journal2008; 43: 151–160.
13.
JiW. Static and dynamic response of a sandwich structure under axial compression, PhD Thesis, The University of Michigan, 2008.
14.
ComanCD. On interactive buckling in a sandwich structure. Z Angew Math Phys2010; 61: 565–577.
15.
PlantemaFJ. Sandwich construction. New York: John Wiley & Sons, Inc., 1966.
16.
Sullins RT, Smith GW and Spier EE. Manual for structural stability analysis of sandwich plates and shells. NASA CR-1969-1457, 1969.
17.
StiftingerMARammerstorferFG. Face layer wrinkling in sandwich shells – theoretical and experimental investigations. Thin-Wall Struct1997; 29(1–4): 113–127.
18.
HwangS-F. The buckling of an orthotropic layer on a half-space. Int J Mech Sci1998; 40(7): 711–721.
19.
VonachWKRammerstorferFG. Wrinkling of thick orthotropic sandwich plates under general loading conditions. Arch Appl Mech2000; 70: 338–348.
20.
VonachWKRammerstorferFG. The effects of in-plane core stiffness on the wrinkling behavior of thick sandwiches. Acta Mech2000; 141: 1–10.
21.
BirmanVBertCW. Wrinkling of composite-facing sandwich panels under biaxial loading. J Sandwich Struct Mater2004; 6: 217–237.
22.
FagerbergLZenkertD. Effects of anisotropy and multiaxial loading on the wrinkling of sandwich panels. J Sandwich Struct Mater2005; 7: 177–194.
23.
SkvortsovVThomsenOT. Local instability of shallow sandwich shells for the general case of orthotropy, curvature and loading. Compos Struct2005; 70: 343–355.
24.
ArtyukhinYuPVelikanovPG. Fundamental solution for the bending of orthotropic plate resting on the elastic winkler-type foundation. In: Proceedings of the 3rd All-Russian Scientific Conference, Samara, 29–31 May, [in Russian], 2006.
25.
Meyer-PieningH-R. Sandwich plates: stresses, deflection, buckling and wrinkling loads – a case study. J Sandw Struct Mater2006; 8: 381–394.
Ley RP, Lin W and Mbanefo U. Facesheet wrinkling in sandwich structures. NASA/CR-1999-208994, 1999.
28.
HetényiMI. Beams on elastic foundation. Ann Arbor: University of Michigan Press, 1946.
29.
KoissinVShipshaASkvortsovV. Compression strength of sandwich panels with sub-interface damage in the foam core. Compos Sci Technol2009; 69: 2231–2240.
30.
BiotMA. Bending of an infinite plate on an elastic foundation. J Appl Mech1937; 4(1): A1–7.
31.
PasternakPL. Fundamentals of a new method for analysis of structures on elastic foundation described by two foundation moduli. Moscow-Leningrad: Stroiizdat, 1954[in Russian].
32.
Il'gamovMAIvanovVAGulinBV. Calculation of shells with an elastic filler. Moscow: Nauka, 1987[in Russian].
33.
AllenHG. Analysis and design of structural sandwich panels. Oxford: Pergamon Press, 1969.
34.
KoissinVShipshaASkvortsovV. Effect of physical non-linearity on local buckling in sandwich beams. J Sandw Struct Mater2010; 12(4): 477–494.
35.
HuangZYHongWSuoZ. Nonlinear analyses of wrinkles in a film bonded to a compliant substrate. J Mech Phys Solids2005; 53: 2101–2118.
36.
LekhnitskiiSG. Theory of elasticity of an anisotropic body. Moscow: Nauka, 1977[in Russian].
37.
SkvortsovV. Exact analysis of sandwich plates bending based on elasticity theory and the technique of integral transformations”. In: Proceedings of 5th International Conference on Mechanics of Sandwich Structures, Zurich, September 5–7, 2000.
38.
NiuBKTalrejaR. Modeling of wrinkling in sandwich panels under compression. J Eng Mech1999; 125(8): 875–883.
