This article deals with experimental, theoretical, and FE characterization of the local buckling in foam-core sandwich beams. In the theoretical approach, this phenomena is considered in a periodic formulation (unbounded wrinkle wave); a nonlinear stress—strain response of the face material is accounted for. In the FE approach, nonlinearity of the core material is also modeled. Full-field strain measurement is employed in the tests showing that the commonly used edgewise compression set-up can cause premature waviness of the faces, and therefore, nonlinear local deformations in the core layer.
Stiftinger, M.A. and Rammerstorfer , F.G. (1997). On Face Wrinkling in Sandwich Shells - Theoretical and Experimental Investigations , Thin-walled Structures, 29(1-4): 113-127.
2.
Fleck, N.A. and Sridhar, I. ( 2002). End Compression of Sandwich Columns, Composites Part A, 33: 353-359.
3.
Fagerberg, L. ( 2003). Wrinkling of Sandwich Panels for Marine Applications, PhD Thesis, Department of Aeronautics & Vehicle Engineering, Royal Institute of Technology, Stockholm, Sweden.
4.
Gdoutos, E.E. , Daniel, I.M. and Wang, K.-A. (2003). Compression Facing Wrinkling of Composite Sandwich Structures, Mechanics of Materials , 35(3-6): 511-522.
5.
Birman, V. and Bert, C.W. ( 2004). Wrinkling of Composite-facing Sandwich Panels Under Biaxial Loading, Journal of Sandwich Structures and Materials, 6: 217-237.
Koissin, V., Skvortsov, V. and Shipsha, A. ( 2007). Stability of the Face Layer of Sandwich Beams with Sub-interface Damage in the Foam Core, Journal of Composite Structures, 78(4): 507-518.
Bažant, Z.P. and Cedolin, L. ( 2003). Stability of Structures: Elastic, Inelastic, Fracture, and Damage Theories, Dover Publications Inc., New York.
10.
Cosmos/M 2.0 User’s Guide (1998).
11.
Koissin, V. and Shipsha, A.Residual In-plane Mechanical Properties of Transversely Crushed Structural Foams, To appear in Journal of Sandwich Structures and Materials.
12.
Sneddon, I.N. (1951). Fourier Transform, McGraw-Hill Book Co., NY.
