Quasi-Static and Low-Velocity Impact Response of Fully Backed or Simply Supported Sandwich Beams

Abstract

The present paper describes analysis of low-velocity transverse impact on sandwich beam, with composite faces from Eglass/epoxy and cores from Polyurethane or PVC. Boundary conditions are fully backed rigid or simply supported. This research is based on a step by step study to generate more reliable impact results. Indentation of laminated beam, indentation of sandwich beams, and three-point loading have been analyzed with existing theories and modeled with the FE code ABAQUS, also their results are compared with experimental results. In quasi-static three-point bending, energy is consumed through three mechanisms: indentation of laminated beam, indentation of sandwich beam, and bending of sandwich beam. Impact on fully backed specimen is modeled in two cases of impactor energies using mass spring model of SDOF (single-degree-of-freedom) and indentation stiffness, lower energy of impactor for elastic indentation of sandwich beams, and higher energy for indentation in plastic area. TDOF (two-degree-of-freedom) with flexural and contact stiffnesses are used for impact on simply supported beams. Impacts are simulated by ABAQUS, as well. Results can describe response of beam and impactor displacements in terms of core and faces thicknesses, core material, and impactor energies for static and impact results. The experimental results are in good agreement with the analytical and FE analyses.

Keywords

low-velocity impact indentation sandwich beams foams three-point bending finite element.

Get full access to this article

View all access options for this article.

References

Timoshenko, S.P. and Goodier, J.N. (1970). Theory of Elasticity, McGraw-Hill , New York.

Willis, J.R. (1966). Hertzian Contact of Anisotropic Bodies, J. Mech. Phys Solids, 14: 163-176.

Yang, S.H. and Sun, C.T. (1982). Indentation Law for Composite Laminates, Composite Materials ASTM.(Sixth conferences): 435-449.

Enboa Wu and Ching-Shih Yen . (1994). The Contact Behavior Between Laminated Composite Plates and Rigid Spheres, Applied Mech , 61: 60-64.

Christoforou, A.P. (1993). On the Contact of a Spherical Indenter and a Thin Composite Laminate, J. Composite Structures, 26: 77-82.

Abrate, S. (1985). Localized Impact on Sandwich Structures with Laminated Facings, Appl Mech Rev, 50(2): 69-82.

Soden, P. (1996). Indentation of composite sandwich beams, J. Strain Analysis, 31(5): 353-360.

Shuaeib, F.M. and Soden, P.D. (1997). Indentation Failure of Composite Sandwich Beams, Compos Sci Technol, 57: 1249-1259.

Zenkert, D. , Shipsha, A. and Person, K. (2004). Static Indentation and Unloading Response of Sandwich Beams, Composites, Part B, 33: 511-522.

10.

Allen, H.G. (1969). Analysis and Design of Structural Sandwich Panels , Pergamon Press, London.

11.

Abrate, S. (2001). Modeling of Impacts on Composite Structures, Composite Structure, 51: 129-138.

12.

Found, M.S. , Howard, I.C. and Paran, A.P. (1998). Interpration of Signals from Dropweight Impact Tests, Composite Structure, 42(2): 353-363.

13.

Aymerich, F. , Orru, P.F. and Priolo, P. (2002). Prediction of Dynamic Response of Impacted Composite Laminates, Key Eng Mater, 221: 197-208.

14.

Abrate, S. (1998). Impact on Composite Structures, Cambridge University Press, Cambridge.

15.

Olsoon, R. (2002). Engineering Method for Prediction of Response and Damage in Sandwich Panels, Sandwich Struct Mater, 51: 129-138.

16.

Todd A. Anderson (2005). An Investigation of SDOF Models for Large Mass Impact on Sandwich Composites, Composite Science and Technology, 65: 551-562.

17.

Mijia Yang and Pizhong Qiao (2005). Nonlinear Impact Analysis of Fully Backed Composite Sandwich Structures, Composites Science and Technology, 65: 551-562.

18.

Md. Akil Hazizian and WJ Cantwell (2002). The Low Velocity Impact Response of Foam-Based Sandwich Structures. Composites, Part B, 33: 193-204.

19.

Technical Standard ASTM D5308-92 (1992). Semi-Flexible Cellular Urethanes for Automotive and Similar Energy Absorption Applications. Annual Book of ASTM Standards.

20.

Rizov, V.I. (2006). Non-linear Indentation Behavior of Foam Core Sandwich Composite Materials- A 2D Approach, J. Computational Materials Science, 35: 107-115.