An engineering method is suggested for prediction of impact response and damage of flat sandwich panels. The approach accounts for local core crushing, delamination and large face sheet deflections and does not rely on empirical indentation laws. Different models are suggested depending upon the impactor mass being either larger or significantly smaller than the mass of the impacted panel. The solution for large mass impact is based on closed form expressions. The solution for small mass impact is obtained from a dimensionless two-parameter integral equation. The validity of the approach is demonstrated on a number of static indentation experiments and impacts on sandwich panels.
3. Abrate S.1997. “Localized impact on sandwich structures with laminated facings,”Appl. Mech. Rev., 50:69-82.
4.
4. Olsson, R.1998. “Methodology for predicting the residual strength of impacted sandwich panels,”FFA TN 1997-09, Bromma: The Aeron. Res. Inst. of Sweden.
5.
5. Nilsson, S.1999. “Residual compressive strength of indented sandwich panels,”FFA TN 1999-27, Bromma: The Aeron. Res. Inst. of Sweden.
6.
6. McGowan, D. M. and Ambur, D. R. 1998. “Damage characteristics and residual strength of composite sandwich panels impacted with and without a compression loading,” AIAA 98-1783-CP, 39th AIAA/ASME/ASCE/AHS/ASC SDM-Conference, 1:713-723.
7.
7. Lie, S. C., 1989. “Damage resistance and damage tolerance of thin composite facesheet honey-comb panels,” S.M. Thesis, Dept. of Aero. and Astro., MIT, Cambridge, MA.
8.
8. Williamson, J. E. and Lagace. P. A. 1993. “Response mechanisms in the impact of graphite/epoxy honeycomb sandwich panels,”Proc. Am. Soc. for Composites, 8th Technical Conf., Cleveland, OH, 287-297.
9.
9. Rinaird, O.1995. “Examination of indentation damage in sandwich panels,”FFA TN 1995-36, Bromma: The Aeron. Res. Inst. of Sweden.
10.
10. Tsang, P. H. W. 1989. “Impact resistance of graphite/epoxy sandwich panels,” S.M. Thesis, Dept. of Aero. and Astro., MIT, Cambridge, MA.
11.
11. Mines, R. A. W., Worrall, C. M. and Gibson, A. G. 1990. “The response of GRP sandwich panels to dropped object impact loading,” FRC’90 Fibre Reinforced Composites, Fourth Int. Conf., Proc. Inst. Mech. Engineers, Liverpool, 149-155.
12.
12. Sun, C. T. and Wu, C. L. 1991. “Low velocity impact of composite sandwich panels,” AIAA paper 91-1077-CP, AIAA 32nd Structures, Struct. Dyn. and Matls. Conf., Baltimore, MD, 1123-1129.
13.
13. Lee, L. J., Huang, K. Y. and Fann, Y. J.1993. “Dynamic responses of composite sandwich plate impacted by a rigid ball,”J. Compos. Mater., 27:1238-1256.
14.
14. Davies, P.et al.1995. “Response of composite sandwich panels to impact loading,”Revue de l’Institut Français du Pétrole, 50:75-82.
15.
15. Abdul Wahab, M. A., 1997. “Etude du compertement dynamique de panneaux sandwichs a l’impact,” PhD Thesis 97.02, Ecole Nationale Superieure d’Arts et Metiers, Bordeaux.
16.
16. Ambur, D. R. and Cruz, J. 1995. “Low-speed impact response characteristics of composite sandwich panels,” AIAA 95-1460-CP, 36th AIAA/ASME/ASCE/AHS/ASC SDM-Conference, 4:2681-2689.
17.
17. Nemes, J. A. and Simmonds, K. E.1992. “Low-velocity impact response of foam-core sandwich composites,”J. Compos. Mater., 26:500-519.
18.
18. Davies, P.et al.1995. “Impact behaviour of composite sandwich panels to impact loading,”Impact and Dynamic Fracture of Polymers and Composites, ESIS 19, London: Mech. Engng. Publ., 341-358.
19.
19. Horrigan, D. P. W., Aitken, R. R. and Moltschaniwskyj, G.2000. “Modelling of crushing due to impact in honeycomb sandwiches,”J. Sandwich Struct. and Mater., 2:131-151.
20.
20. Koller, M. G.1986. “Elastic impact of spheres on sandwich plates,”J. Appl. Math. Phys. (ZAMP), 37:256-269.
21.
21. Olsson, R. 1998, “Theory for small mass impact on sandwich panels,” Mechanics of sandwich structures, Proc. EUROMECH 360, Dordrecht: Kluwer, 231-238.
22.
22. Olsson, R. and McManus, H. L.1996. “Improved theory for contact indentation of sandwich panels,”AIAA J., 34:1238-1244.
23.
23. Türk, M. H. and Hoo Fatt, M. S.1999. “Localized damage response of composite sandwich plates,”Composites Part B, 30:157-165.
24.
24. Palazotto, A. N., Herup, E. J. and Gummadi, L. N. B.2000. “Finite element analysis of low-velocity impact on composite sandwich plates,”Compos. Struct., 49:209-227.
25.
25. Whitney, J. M.1987. Structural analysis of laminated anisotropic plates, Lancaster, PA: Technomic.
26.
26. Zenkert, D.1995. An introduction to sandwich construction, London: EMAS Ltd.
27.
27. Olsson, R. 1994. “Simplified theory for contact indentation of sandwich panels,” SM Thesis, Aero. and Astro. Dept., MIT (also FFA TN 1994-33, FFA, Sweden).
28.
28. Vesic, A. S. 1973. Proc. 8th Int. Conf. on Soil Mechanics and Foundation Engineering, Moscow, 4. 2:51-52.
29.
29. Selvadurai, A. P. S.1979. Elastic analysis of soil-foundation interaction, Amsterdam: Elsevier.
30.
30. Olsson, R.2000. “Analytical prediction of large mass impact damage in composite laminates,” FFAP H-1423, FFA, Bromma, to appear in Composites Part A.
31.
31. Robinson, P. and Davies, G. A. O.1992. “Impactor mass and specimen geometry effects in low velocity impact of laminated composites,”Int. J. Impact Engng., 12:189-207.
32.
32. Olsson, R.2000. “Mass criterion for wave controlled impact response of composite plates,”Composites Part A, 31:879-887.
33.
33. Frischbier J. 1987. “Theorie der Stossbelastung orthotroper Platten und ihre experimentelle Überprüfung,”Mitteilung 51, Bochum: Inst. für Mechanik, Ruhr-Univ.
34.
34. Olsson, R.1992. “Impact response of orthotropic composite laminates predicted from a one-parameter differential equation,”AIAA J., 30:1587-1596.
35.
35. Mittal, R K.1987. “A simplified analysis of the effect of transverse shear on the response of elastic plates to impact loading,”Int. J. Solids Struct., 23:1191-1203.
36.
36. Sneddon, I. N.1945. “The symmetrical vibrations of a thin elastic plate,”Proc. Camb. Philos. Soc., 41:27-43.
37.
37. Timoshenko, S. P. 1913. “Zur Frage nach den Wirkung eines Stoßes auf eninen Balken,”Zeitschrift für Mathematik und Physik, 62:198-209.
38.
38. Shivakumar, K. N., Elber, W. and Illg, W.1985. “Prediction of impact force and duration due to low velocity impact on circular composite laminates,”Trans. ASME, J. Appl. Mech., 52:674-680.
39.
39. Timoshenko, S. P. and Woinowsky-Krieger, S.1959. Theory of plates and shells, New York: McGraw-Hill.
40.
40. Lekhnitskii, S. G.1968. Anisotropic plates, New York, Gordon and Breach.
41.
41. Davies, P.1996, “Fracture of marine composites,”Key Engng. Mater., 121-122:583-596.
42.
42. Davies, P., Choqueuse, D. and Pichon, A.1994. “Influence of the foam core on composite sandwich static and impact response,”Composites Testing and Standardization, ECCM-CTS 2, Hamburg, 513-522.
