Compression characteristics of agglomerated food powders: Effect of agglomerate size and water activity Características de la compresión de alimentos en polvo: Efecto del tamaño del aglomerado y del contenido de humedad

Abstract

The stability of food agglomerates is very important for keeping optimal instant properties as well as flow characteristics. Compression tests have been proven not only to be useful tools in char acterizing attrition, but also excellent descriptors for powder flowability. The purpose of this work was to study the effects of particle size and water activity (a _w) on the compression characteristics of selected agglomerated food powders, and then to identify suitable mathematical models by using a non-linear regression program for predicting the compression characteristics of food agglomerates when partial attrition takes place. Three agglomerated food powders - non-fat milk, low fat milk and instant coffee - were classified by size into five or six fractions with a set of RX-29 sieve screens. Each fraction was conditioned at three a _w levels, placed in a cylindrical compression cell, and compressed with a piston attached to the crosshead of a TA-XT2 texture analyser. The crosshead speed was 1 mm/s in all tests and the maximum force applied was 245 N. Particle size was found to play a significant role in compression tests in that the greater the particle size, the greater the volume reduction. It was easier to compress the low a _w samples, but in all tests changing a _w did not significantly affect compression characteristics. Sone's two- parameter model accurately described the combination of compaction and attrition when compres sion pressure did not exceed a certain level, while Peleg's double-exponential model with four parameters best fitted the compression data.

Keywords

food powders compression agglomerates water activity

Get full access to this article

View all access options for this article.

References

Adams M.J. , Mullier M.A. and Seville J.P.K. (1994). Agglomerate strength measurement using a uniaxial confined compression test. Powder Technology 78: 5-13.

Barbosa-Cánovas G.V. , Malave-Lopez J. and Peleg M. (1987). Density and compression of selected food powders mixtures. Journal of Food Processing and Engineering 10: 1-19.

Barletta B.J. and Barbosa-Cánovas G.V. (1993). An attrition index to assess fines formation and particle size reduction in tapped agglomerated food powders. Powder Technology 77: 89-93.

Barletta B.J. , Knight K.M. and Barbosa-Cánovas G.V. (1993). Compaction characteristics of agglomerated coffee during tapping. Journal of Texture Studies 24: 253-268.

Bemrose C.R. and Bridgwater J. (1987). A review of attrition and attrition test methods . Powder Technology 49: 97-126.

Carstensen J.T. and Hou X.P. (1985). The Athy-Heckel equation applied to granular agglomerates of basic tricalcium phosphate [(3Ca3PO4)2(Ca(OH) 2]. Powder Technology 42: 153-157.

Chen M. and Malghan S.G. (1994). Investigation of compaction equations for powder . Powder Technology 81: 75-81.

Duberg M. and Nystrom C. (1986). Studies of direct compression of tablets: XVII. Porosity-pressure curves for the characterization of volume reduction mechanisms in powder compression. Powder Technology 46: 67-75.

Geoffroy J.M. and Carstensen J.T. (1991). Effects of measurement methods on the properties of materials. Powder Technology 68: 91-96.

10.

Georget D.M.R. , Parker R. and Smith A.C. (1994). A study of the effects of water content on the compaction behavior of breakfast cereal flake. Powder Technology 81: 189-195.

11.

Ghadiri M. , Yuregir K.R. , Pollock H.M. , Ross J.D.J. and Rolfe N. (1991). Influence of processing conditions on attrition of NaCl crystals. Powder Technology 65: 311-320.

12.

Kurup T.R.R. and Pilpel N. (1978). Compression characteristics of pharmaceutical powder mixtures. Powder Technology 19: 147-155.

13.

Malave J. , Barbosa-Cánovas G.V. and Peleg M. (1985). Comparison of the compaction characteristics of selected food powders by vibration, tapping and mechanical compression. Journal of Food Science 50: 1473-1476.

14.

Moreyra R. and Peleg M. (1980). Compressive deformation patterns of selected food powders. Journal of Food Science 45: 864-868.

15.

Mort P.R. , Sabia R. , Niesz D.E. and Riman R.E. (1994). Automated generation and analysis of powder compaction diagram. Powder Techllology 78: 111-119.

16.

Mullier M.A. , Seville J.P.K. and Adams M.J. (1991). The effects of agglomerate strength on attrition during processing. Powder Technology 65: 321-333.

17.

Nuebel C. and Peleg M. (1994). A research note: compressive stress-strain relationships of agglomerated instant coffee. Journal of Food Processing and Engineering 17: 383-400.

18.

Park B.S. , Smith D.M. and Thoma S.G. (1993). Determination of agglomerate strength distributions, Part 4: Analysis of multimodal particle size distributions. Powder Technology 76: 125-133.

19.

Peleg M. (1977). Flowability of food powders and methods for its evaluation - A review. Journal of Food Processing and Engineering 1: 303-328.

20.

Peleg M. and Normand M.D. (1987). Computer Simulation of the attrition patterns of particulate and agglomerated foods. Journal of Food Science 52 (4): 943-947.

21.

Ramberger R. and Burger A. (1985). On the application of the Heckel and Kawakita equations on powder compaction. Powder Technology 43:1-9.

22.

Schubert H. (1975). Tensile strength of agglomerates. Powder Technology 11: 107-119.

23.

Schubert H. (1981). Principles of agglomeration. International Chemical Engineering 21 (3): 363-377.

24.

Schubert H. (1987). Food particle technology. Part I: Properties of particles and particulate food systems. Journal of Food Engineering 6: 1-32.

25.

Swyngedau S. , Nussinovitch A. , Roy I. , Peleg M. and Huang V. (1991). Comparison of four models for the compressibility of breads and plastic foams. Journal of Food Science 56 (3): 756-759.