Moisture content, temperature, and surface area variations of potato and squash slabs were measured during forced convective air drying; the effect of the initial moisture content on drying behaviour was also investigated. A mathematical model that numerically integrated the diffusion equation and the thermal balance for a three-dimensional shrinking slab was used to simulate the drying process. The parameters of the model (surface area, heat transfer coefficient and dry solid density) were experimentally determined. Fitting parameters (activation energy and pre- exponential coefficient in the Arrhenius equation) were found by comparing experimental and predicted drying curves. Good agreement was obtained down to a moisture level of 0.4 kg water/kg dry solid. Diffusion coefficients were independent of their moisture content within the range studied for both products. The activation energies for potato and squash were 2.09 x 104 kJ/kg mol and 3.76 x 10 4 kJ/kg mol, respectively. Changes in the rates of drying and heating curves for potato took place at moisture levels around 0.4 kg water/kg dry solid, but this was not the case for squash. The differences were mainly attributed to the different shapes of the sorp tion isotherms.
Aguerre R.J., Suárez C. and Viollaz P.E. (1986). Enthalpy-entropy compensation in sorption phenomena: application to the prediction of the effect of temperature on food isotherms . Journal of Food Science51: 1547-1549.
2.
Alzamora S.M. (1980). Tranferencia de masa y calor durante la deshidratación de palta en corriente de aire. Tesis doctoral. Universidad Buenos Aires.
3.
Andrieu J. and Stamatopoulos A.A. (1984). Diffusion model applied to pasta drying kinetics. Boston, US: International Drying Symposium '84
4.
Andrieu J. and Stamatopoulos A.A. (1986). Moisture and heat transfer modelling during durum wheat pasta drying. In: Mujumdar A. (ed.), Drying'86. Vol 2. Washington DC: Hemisphere Publishing Corp. pp. 492-498.
5.
Bimbenet J.J., Daudin J.D. and Wolff E. (1985). Air drying kinetics of biological particles. In: R. Toei R. and Mujumdar A. (eds), Drying '85. Washington : Hemisphere Publishing Corp. pp. 178-185.
6.
Coumans W.J. and Thijssen H.A.C. (1986). A simplified calculation method for the isothermal drying of solid and hollow systems with any degree of shrinkage. Vol 1. In: Mujumdar A. (ed.), Drying '86. Washington: Hemisphere Publishing Corp. pp. 49-56.
7.
Crapiste G.H., Whitaker S. and Rotstein E. (1988). Drying of cellular material. I. A mass transfer theory. Chemical Engineering Science43: 2919-2928.
8.
Dengate H.N., Baruch D.W. and Meredith P. (1978). The density of wheat starch granules: a tracer dilution procedure for determining the density of an immiscible dispersed phase. Starch/Stärke30(3): 80-84.
9.
Falabella M.C., Aguerre R.J. and Suarez C. (1989). Determination of the heat of water vapor sorption by means of electronic hygrometers. Lebensmittel Wissenschaft und Technologie2211-14.
10.
Haertling M. (1980). Prediction of drying rates. In: Mujumdar A. (ed.), Drying '80. Vol 1 Washington DC: Hemisphere Publishing, pp. 88-98.
11.
Hallström B. (1992). Mass transfer in foods. In: Heldman D. and Lund D. (eds), Handbook of Food. Series Food Science and Technology. Vol 51. New York: Marcel Dekker. pp. 317-339.
12.
Keey R.B. (1975). Drying principles and practice. New York: Pergamon Press. p. 342.
13.
Krischer O. (1963). Die wissenschaftlichen Grundlagen der Trocknungstecknik . Berlin: Springer-Verlag.
14.
Mazza G. and LeMaguer.M. (1980). Dehydration of onion: some theoretical and practical considerations. Journal of Food Technology15: 181-194.
15.
Nissan A.H., Kaye W.G. and Bell J.R. (1959). Mechanism of drying thick porous bodies during the falling rate period. I. The pseudo-wet-bulb temperature. Journal of the American Institute of Chemical Engineering5: 103-110.
16.
Prausnitz J.M., Eckert C.A., Orye R.V. and O'Connell J.P. (1967). Computer calculation for multicomponent vapor liquid equilibrium. Englewood Cliffs NJ: Prentice-Hall. p 219.
17.
Roselló C., Cañellas J., Simal S. and Berna, A. (1992). Simple mathematical model to predict the drying rates of potatoes. Journal of Agriculture and Food Chemistry40: 2374-2378.
18.
Rotstein E. and Cornish A.R.H. (1978). Influence of cellular membrane permeability on drying behaviour. Journal of Food Science43: 926-934, 939.
19.
Rovedo C.O. (1994). Transferencia simultánea de calor y materia en sistemas con cambio de volumen: aplicación al secado de placas de papa. PhD Thesis. Facultad de Ciencias y Naturales, Universidad de Buenos Aires, Argentina.
20.
Rovedo C.O., Suárez C. and Viollaz P.E. (1995a). Drying of foods: evaluation of a drying model . Journal of Food Engineering26 (1): 1-12.
21.
Rovedo C.O., Suárez C. and Viollaz P.E. (1995b). Drying simulation of a solid slab with three dimensional shrinkage. Drying Technology13 (1&2): 371-393.
22.
Simal S., Berna A., Mulet A. and Roselló C. (1993). A method for the calculation of the heat transfer coefficient in potato drying. Journal of Science and Food Agriculture63: 365-367.
23.
Stanish M.A., Schajer G.S. and Kayihan F. (1985). Mathematical modeling of wood drying from heat and mass transfer fundamentals. In: Toei R. and Mujumdar A. (eds), Drying '85. Washington: Hemisphere Publishing Corp. pp. 360-367.
24.
Treybal R.E. (1980). Operaciones de Transferencia de Masa. 2nd. Ed., New York: McGraw-Hill Book Co., pp. 90 and 268.
25.
Vaccarezza L.M. (1975). Cinética y mecanismo de transporte del agua durante la deshidratación de remolacha azucarera. Tesis doctoral. FCEyN, UBA.
26.
Vaccarezza L.M., Lombardi J.L. and Chirife J. (1974). Heat transfer effects on drying rate of food dehydration . The Canadian Journal of Chemical Engineering52: 576-579.
27.
Vagenas G.K., Drouzas A.E., Marinos-Kouris D. and Saravacos G.D. (1990) Predictive equations for thermophysical properties of plant foods. In: Engineering and Food. Vol. 1. Physical Properties and Process Control. London and New York: Elsevier Applied Science. pp. 399-407.
28.
Viollaz P.E. and Suarez C. (1984) An equation for diffusion in shrinking or swelling bodies. Journal of Polymer Science, Polymer Physics Edition22: 875-879.
29.
Wolff E. and Bimbenet J.J. (1986). Internal and superficial temperature of solids during drying. In: Mujumdar A. (ed.), Drying '86. Vol 1. Washington DC: Hemisphere Publishing Corp. pp. 77-84.
