In this study, the effect of different cold plasma treatments was investigated as a novel method for the modification of starch film properties. The films were prepared from wheat starch using a solvent casting method and then treated with air and O2 glow discharge plasma at different durations (4, 8, and 12 min). A significant increase in the hydrophilicity of the films was observed due to the formation of oxygen-containing groups after plasma treatment. Fourier transform infrared analysis illustrated a decrease in C–H groups that caused an increase in C–O and C–O–C groups in air-treated films and carbonyl groups in O2-treated films. The surface roughness of the treated films increased from 17.6 nm to 22.5 and 20.6 nm after air and O2 treatments, respectively. Plasma treatments decreased oxygen permeability of the films but no significant difference in the water vapor permeability was observed. After plasma treatment, tensile strength of films was improved due to crosslinking and etching at the surface, although elongation at break remains unchanged.
AndradeCTSimãoRAThiréRMAcheteCA (2005) Surface modification of maize starch films by low-pressure glow 1-butene plasma. Carbohydrate Polymers61: 407–413.
2.
ASTM. (1989). Standard test methods for water vapor transmission of materials. Annual book of ASTM standards. Designation E96-E80, Philadelphia: American Society for Testing and Materials. pp.730–739.
3.
ASTM. (1995). Standard test method for tensile properties of thin plastic sheeting. Annual book of ASTM standards, 8, Philadelphia: American Society for Testing and Materials. pp.182–190.
4.
BasiakEDebeaufortFLenartA (2016) Effect of oil lamination between plasticized starch layers on film properties. Food Chemistry195: 56–63.
5.
De GeyterNMorentRLeysCGengembreLPayenE (2007) Treatment of polymer films with a dielectric barrier discharge in air, helium, and argon at medium pressure. Surface and Coatings Technology201: 7066–7075.
6.
De MeloCGarciaPSGrossmannMVEYamashitaFDall'AntôniaLHMaliS (2011) Properties of extruded xanthan-starch-clay nanocomposites films. Brazilian Archives of Biology and Technology54: 1223–1333.
7.
GhanbarzadehBAlmasiHEntezamiAA (2011) Improving the barrier and mechanical properties of corn starch-based edible films: Effect of citric acid and carboxymethyl cellulose. Industrial Crops and Products33: 229–235.
8.
HananiZNRoosYHKerryJ (2014) Use and application of gelatin as potential biodegradable packaging materials for food products. International Journal of Biological Macromolecules71: 94–102.
9.
HwangYJMcCordMGAnJSKangBCParkSW (2005) Effects of helium atmospheric pressure plasma treatment on low-stress mechanical properties of polypropylene nonwoven fabrics. Textile Research Journal75: 771–778.
10.
InagakiNNarushimKTuchidaNMiyazakiK (2004) Surface characterization of plasma-modified poly (ethylene terephthalate) film surfaces. Journal of Polymer Science Part B: Polymer Physics42: 3727–3740.
11.
JiménezAFabraMJTalensPChiraltA (2012) Edible and biodegradable starch films: A review. Food and Bioprocess Technology5: 2058–2076.
12.
MillerKSKrochtaJ (1997) Oxygen and aroma barrier properties of edible films: A review. Trends in Food Science & Technology8: 228–237.
13.
MorentRDe GeyterNDesmetTDubruelPLeysC (2011) Plasma surface modification of biodegradable polymers: A review. Plasma Processes and Polymers8: 171–190.
14.
MüllerCMLaurindoJBYamashitaF (2011) Effect of nanoclay incorporation method on mechanical and water vapor barrier properties of starch-based films. Industrial Crops and Products33: 605–610.
15.
OhYARohSHMinSC (2016) Cold plasma treatments for improvement of the applicability of defatted soybean meal-based edible film in food packaging. Food Hydrocolloids58: 150–159.
16.
PankajSBueno-FerrerCMisraNO'NeillLTiwariBBourkeP, et al.(2015a) Characterization of dielectric barrier discharge atmospheric air cold plasma treated gelatin films. Food Packaging and Shelf Life6: 61–67.
17.
PankajSBueno-FerrerCO'NeillLTiwariBBourkePCullenP (2017) Characterization of dielectric barrier discharge atmospheric air plasma treated chitosan films. Journal of Food Processing and Preservation41: e12889.
18.
Pankaj SK, Bueno-Ferrer C, Misra N, Bourke P and Cullen P. (2014a). Zein film: Effects of dielectric barrier discharge atmospheric cold plasma. Journal of Applied Polymer Science 131(18).
19.
PankajSKBueno-FerrerCMisraNMilosavljevićVO'DonnellCBourkeP, et al.(2014b) Applications of cold plasma technology in food packaging. Trends in Food Science & Technology35: 5–17.
20.
PankajSKBueno-FerrerCMisraNO'NeillLTiwariBBourkeP, et al.(2014c) Physicochemical characterization of plasma-treated sodium caseinate film. Food Research International66: 438–444.
21.
PankajSKBueno-FerrerCMisraNO'NeillLTiwariBBourkeP, et al.(2015b) Dielectric barrier discharge atmospheric air plasma treatment of high amylose corn starch films. LWT – Food Science and Technology63: 1076–1082.
22.
QiuYZhangCHwangYBuresBMcCordM (2002) The effect of atmospheric pressure helium plasma treatment on the surface and mechanical properties of ultrahigh-modulus polyethylene fibers. Journal of Adhesion Science and Technology16: 99–107.
23.
RahmaniBHosseiniHKhaniMFarhoodiMHonarvarZFeizollahiE, et al.(2017) Development and characterisation of chitosan or alginate-coated low density polyethylene films containing Satureja hortensis extract. International Journal of Biological Macromolecules105: 121–130.
24.
SanchisMBlanesVBlanesMGarciaDBalartR (2006) Surface modification of low density polyethylene (LDPE) film by low pressure O2 plasma treatment. European Polymer Journal42: 1558–1568.
25.
Shojaee-AliabadiSHosseiniHMohammadifarMAMohammadiAGhasemlouMOjaghSM, et al.(2013) Characterization of antioxidant-antimicrobial κ-carrageenan films containing Satureja hortensis essential oil. International Journal of Biological Macromolecules52: 116–124.
26.
Simão RA, da Silva ML, Martins M, Thiré RM and Andrade CT. (2006). Sulfur hexafluoride plasma treatment to enhance the hydrophobicity of CVD carbon coatings produced on cornstarch plasticized films. In: Macromolecular Symposia, pp.519–524. Wiley Online Library.
27.
SongAYOhYARohSHKimJHMinSC (2016) Cold oxygen plasma treatments for the improvement of the physicochemical and biodegradable properties of polylactic acid films for food packaging. Journal of Food Science81: 86–96.
28.
XuYKimKMHannaMANagD (2005) Chitosan–starch composite film: Preparation and characterization. Industrial Crops and Products21: 185–192.
