Mechanical, physical, and barrier properties of films obtained from soy protein isolate solutions at different pH were studied and correlated with the structural properties and the microstructure of films. Films obtained at pH 2 and 11, which had denser microstructures and a higher amount of disulfide bonds, showed a higher tensile strength — of about 1.05 MPa — and a higher Young's modulus — of at least 0.15MPa — than the one at pH 8. However, films formed at alkaline pH (8 and 11) exhibited a higher deformation than films at pH 2 — by about 70%. The presence of at least a protein fraction in native state allowed macromolecules to unfold during the mechanical test, reaching greater deformation before breaking. Acidic films exhibited higher water vapor permeability — of about 7 × 10-11 g/m s Pa — and water content — of about 1.5% — and a lower glass transition temperature — of at least 15 °C — than basic ones, due to their higher hydrophilic nature.
Anker M. , Stading M. and Hermansson A.M. (1998). Mechanical properties, water vapour permeability and moisture contents of β-lactoglobulin and whey protein films using multivariate analysis . Journal of Agriculture and Food Chemistry46: 1820-1829.
2.
Astm D644-94. (1994). Standard test methods for moisture content of paper and paperboard by oven drying . In: Annual Book of ASTM Standards. Philadelphia: ASTM, pp. 1-2.
3.
Astm D882-91. (1991). Standard test methods for tensile properties of thin plastic sheeting . In: Annual Book of ASTM Standards. Philadelphia : ASTM, pp. 182-190.
4.
Astm E967-83. (1984). Standard practice for temperature calibration of differential scanning calorimeters and thermal analyzers . In: Annual Book of ASTM Standards. Philadelphia: ASTM, p. 782.
5.
Astm E96-80. (1989). Standard test method for water vapour transmission of materials . In: Annual Book of ASTM Standards. Philadelphia : ASTM, pp. 745-754.
6.
Bowden P.B. (1973). The yield behaviour of glassy polymers. In: Haward R.N. (ed.), The physics of Glassy Polymers. London: Applied Science Publishers, pp. 279-339.
7.
Brandenburg A.H. , Weller C.L. and Testin, R.F. (1993). Edible films and coatings from soy protein . Ibid58: 1086-1089.
8.
Champion D. , Le Meste M. and Simatos D. (2000). Towards and improved understanding of glass transition and relaxations in foods: molecular mobility in the glass transition range . Trends in Food Science and Technology11: 41-55.
9.
Cherian G. , Gennadios A. , Weller C. and Chinachoti P. (1995). Thermomechanical behavior of wheat gluten films: effect of sucose, glycerin, and sorbitol . Cereal Chemistry72(1): 1-6.
10.
Cuq B. , Gontard N. and Guilbert S. (1998). Proteins as agricultural polymers for packaging production . Cereal Chemistry75(1): 1-9.
11.
Darby N. and Creighton T.E. (1995). Disulfide bonds in protein folding and stability . In: Shirley, B.A. (ed.), Protein Stability and Folding. Theory and Practice. Totowa, New Jersey: Humana Press Co., pp. 219-252.
12.
Gennadios A. and Weller C.L. (1991). Edible films and coatings from soymilk and soy protein . Cereal Food World36(12): 1004-1009.
13.
Gennadios A. , Brandenburg A.H. , Weller C.L. and Testin R.F. (1993). Effect of pH on properties of wheat gluten and soy protein isolate films . Journal of Agriculture and Food Chemistry41: 1835-1839.
14.
Gennadios A. , Weller C.L. and Gooding C.H. (1994). Measurement errors in water vapour permeability of high permeable hydrophilic edible films . Journal of Food Engineering21: 395-409.
15.
Ghorpade V.M. , Li H. , Gennadios A. and Hanna M.A. (1995). Chemically modified soy protein films . Trans. ASAE38(6): 1805-1808.
16.
Gnanasambandam R. , Hettiarachchy N.S. and Coleman M. (1997). Mechanical and barrier properties of rice bran films . Journal of Food Science62: 395-398.
17.
Gontard N. , Guilbert S. and Cuq J.L. (1992). Edible wheat gluten films: influence of the main process variables on film properties using responses surface methodology . Journal of Food Science57: 190-196.
18.
Gontard N. , Guilbert S. and Cuq J.L. (1993). Water and glycerol as plasticizers affect mechanical and water vapor barrier properties of an edible wheat gluten film . Journal of Food Science58: 206-211.
19.
Haward R.N. (1973). The post-yield behaviour of amorphous plastics . In: Haward R.N. (ed.), The Physics of Glassy Polymers. London: Applied Science Publ., pp. 340-393.
20.
Herald T.J. , Gnanasambandam R. , McGuire B.H. and Hachmeister K.A. (1995). Degradable wheat gluten films: preparation, properties and applications . Journal of Food Science60: 1147-1150.
21.
Jangchud A. and Chinnan M.S. (1999). Peanut protein film as affected by drying temperature and pH of film forming solution . Journal of Food Science64: 153-157.
22.
Kester J.J. and Fennema, O.R. (1986). Edible films and coatings: a review . Food Technology40(12): 47-58.
23.
Kim K.M. , Weller C.L. , Hanna M.A. and Gennadios A. (2002). Heat curing of soy protein films at selected temperatures and pressures . Lebensmittel Wissenschaft und Technologie35: 140-145.
24.
Krochta J.M. (1997). Edible Protein Films and Coatings. In: Damodaran, S. and Paraf, A. (eds), Food Proteins and their Applications. New York: Marcel Dekker, Inc., pp. 529-549.
25.
Mauri A.N. and Añon M.C. (2006). Effect of the solution pH on solubility and some structural properties of soybean protein isolate films . Journal of the Science of Food and Agriculture86(7): 1064-1072.
26.
McHugh H.T. , Avena-Bustillos R. and Krochta J.M. (1993). Hydrophilic edible films: Modified procedure for water vapor permeability and explanation of thickness effects . Journal of the Science of Food and Agriculture58: 899-903.
27.
Morales A. and Kokini J.L. (1997). Glass transition of soy globulins using differential scanning calorimetry and mechanical spectrometry . Biotechnology Progress13: 624-629.
28.
Park S.K. , Hettiarachchy N.S. , Ju Z.Y. and Gennadios A. (2002). Formation and properties of soy protein film and coatings. In: Gennadios A. (ed.), Protein Based Films and Coatings. New York: CRC Press, pp. 123-137.
29.
Perez-Gago M.B. , Nadaud P. and Krochta J.M. (1999). Water vapour permeability, solubility and tensile properties of heat-denatured versus native whey protein films . Journal of Food Science64: 1034-1037.
30.
Petersen K. , Vaeggemose Nielsen P. , Bertelsen G. , Lawther M. , Olsen M.B. , Nilsson N.H. and Mortensen G. (1999). Potential of biobased materials for food packaging . Trends in Food Science Technology10: 52-68.
31.
Petruccelli S. and Añon M.C. (1995). Partial reduction of soy proteins isolate disulfide bonds . Journal of Agriculture and Food Chemistry43: 2001-2006.
32.
Quinn G. , Monahan E.J. , O'Riordan E.D. , OÇSullivan M. and Longares A. (2003). Role of covalent and non covalent interactions in the formation of films from unheated whey protein solutions following by pH adjustment . Journal of Food Science68: 2284-2288.
33.
Rhim J.W. , Gennadios A. , Handa A. , Weller C.L. and Hanna M.A. (2000). Solubility, tensile and color properties of modified soy protein isolate films . Journal of Agriculture and Food Chemistry48: 4937-4941.
