A thermomechanical, polar continuum formulation under finite strains is proposed for anisotropic materials using a multiplicative decomposition of the deformation gradient. First, the kinematics and conservation laws for three-dimensional, polar, and nonpolar continua are obtained. Next, these kinematics and conservation laws are connected to their corresponding counterparts for surface continua, based on Kirchhoff–Love assumptions. Then the shell material models are extracted from three-dimensional material models for finite-temperature problems using established connections. The weak forms are obtained for both three-dimensional nonpolar continua and Kirchhoff–Love shells. These formulations are expressed in tensorial form so that they can be used in both curvilinear and Cartesian coordinates. They can be used to model anisotropic crystals and soft biological materials.
BergmanGOldenburgM.A finite element model for thermomechanical analysis of sheet metal forming. Int J Numer Methods Eng2004; 59(9): 1167–1186.
2.
WitekLStachowiczF.Modal analysis of the turbine blade at complex thermomechanical loads. Strength Mater2016; 48(4): 474–480.
3.
HuBZengZShaoW, et al. Novel cooling technology to reduce thermal impedance and thermomechanical stress for SiC application. In: 2017 IEEE Applied Power Electronics Conference and Exposition (APEC), 2017.
4.
ZeanhADalvernyOKaramaM, et al. Thermomechanical modelling and reliability study of an IGBT module for an aeronautical application. In:
EuroSimE 2008—International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Micro-Systems, 2008.
5.
GuoGLongBChengB, et al. Three-dimensional thermal finite element modeling of lithium-ion battery in thermal abuse application. J Power Sources2010; 195(8): 2393–2398.
6.
EitnerUKajari-SchröderSKöntgesM, et al. Thermal stress and strain of solar cells in photovoltaic modules. Berlin: Springer, 2011, 453–468.
XiaoHChenX.Modeling and simulation of curled dry leaves. Soft Matter2011; 7: 10794–10802.
9.
HolzapfelGAGasserTCOgdenRW.A new constitutive framework for arterial wall mechanics and a comparative study of material models. J Elast2000; 61(1): 1–48.
10.
EinsteinDRFreedADVesleyI. Invariant theory for dispersed transverse isotropy: An efficient means for modeling fiber splay. In:
ASME 2004 International Mechanical Engineering Congress and Exposition, 2004.
11.
MenzelA. Anisotropic remodelling of biological tissues. Berlin: Springer, 2006, 91–104.
12.
ItskovMEhretAEMavrilasD.A polyconvex anisotropic strain–energy function for soft collagenous tissues. Biomech Model Mechanobiol2006; 5(1): 17–26.
13.
GizziAVastaMPandolfiA.Modeling collagen recruitment in hyperelastic bio-material models with statistical distribution of the fiber orientation. Int J Eng Sci2014; 78: 48–60.
14.
BaillyLToungaraMOrgéasL, et al. In-plane mechanics of soft architectured fibre–reinforced silicone rubber membranes. J Mech Behav Biomed Mater2014; 40: 339–353.
15.
BiotMA.Theory of stress–strain relations in anisotropic viscoelasticity and relaxation phenomena. J Appl Phys1954; 25(11): 1385–1391.
16.
HalpinJPaganoN.Observations on linear anisotropic viscoelasticity. J Compos Mater1968; 2(1): 68–80.
17.
HolzapfelGAGasserTC.A viscoelastic model for fiber-reinforced composites at finite strains: Continuum basis, computational aspects and applications. Comput Methods Appl Mech Eng2001; 190(34): 4379–4403.
18.
VolkovVSKulichikhinVG.On the basic laws of anisotropic viscoelasticity. Rheol Acta2007; 46(8): 1131–1138.
19.
ChenDLYangPFLaiYS, et al. A new representation for anisotropic viscoelastic functions. Math Mech Solids2016; 21(6): 685–708.
20.
De BorstRFeenstraPH.Studies in anisotropic plasticity with reference to the hill criterion. Int J Numer Methods Eng1990; 29(2): 315–336.
21.
PapadopoulosPLuJ.On the formulation and numerical solution of problems in anisotropic finite plasticity. Comput Methods in Appl Mech Eng2001; 190(37): 4889–4910.
22.
BarlatFAretzHYoonJ, et al. Linear transfomation-based [sic] anisotropic yield functions. Int J Plast2005; 21(5): 1009–1039.
23.
ChoiKPanJ.A generalized anisotropic hardening rule based on the Mroz multi-yield-surface model for pressure insensitive and sensitive materials. Int J Plast2009; 25(7): 1325–1358.
24.
LeeJWLeeMGBarlatF.Finite element modeling using homogeneous anisotropic hardening and application to spring-back prediction. Int J Plast2012; 29: 13–41.
25.
CuomoMFagoneM.Model of anisotropic elastoplasticity in finite deformations allowing for the evolution of the symmetry group. Nanosci Technol: Int J2015; 6(2): 135–160.
26.
LiHHuXYangH, et al. Anisotropic and asymmetrical yielding and its distorted evolution: Modeling and applications. Int J Plast2016; 82: 127–158.
27.
LeeEHStoughtonTBYoonJW.A yield criterion through coupling of quadratic and non-quadratic functions for anisotropic hardening with non-associated flow rule. Int J Plast2017; 99: 120–143.
28.
LiHZhangHYangH, et al. Anisotropic and asymmetrical yielding and its evolution in plastic deformation: Titanium tubular materials. Int J Plast2017; 90: 177–211.
29.
BeveridgeAJWheelMANashDH.The micropolar elastic behaviour of model macroscopically heterogeneous materials. Int J Solids Struct2013; 50(1): 246–255.
30.
GrammenoudisPTsakmakisC.Finite element implementation of large deformation micropolar plasticity exhibiting isotropic and kinematic hardening effects. Int J Numer Methods Eng2005; 62(12): 1691–1720.
31.
KaloniPNArimanT.Stress concentration effects in micropolar elasticity. Z Angew Math Phys1967; 18(1): 136–141.
32.
KunduSKumariAPanditDK, et al. Love wave propagation in heterogeneous micropolar media. Mech Res Commun2017; 83: 6–11.
33.
SantapuriSLoweRLBechtelSE, et al. Thermodynamic modeling of fully coupled finite-deformation thermo-electro-magneto-mechanical behavior for multifunctional applications. Int J Eng Sci2013; 72: 117–139.
34.
MehnertMHossainMSteinmannP.Towards a thermo-magneto-mechanical coupling framework for magneto-rheological elastomers. Int J Solids Struct2017; 128: 117–132.
35.
SfyrisDSfyrisGIBustamanteR.Nonlinear electro-magneto-mechanical constitutive modelling of monolayer graphene. Proc R Soc London, Ser A2016; 472(2188): 20150750.
36.
SantapuriSBechtelSE. Model-based optimization of coupled thermo-electro-magneto-mechanical behavior of load-bearing antennas. In:
ASME 2010 International Mechanical Engineering Congress and Exposition, 2010.
37.
StefanouISulemJRattezH. Cosserat approach to localization in geomaterials. Cham: Springer, 2017, 1–25.
38.
SteigmannDJ.A concise derivation of membrane theory from three-dimensional nonlinear elasticity. J Elast2009; 97(1): 97–101.
39.
SteigmannDJ.Koiter’s shell theory from the perspective of three-dimensional nonlinear elasticity. J Elast2013; 111(1): 91–107.
40.
TepoleABKabariaHBletzingerKU, et al. Isogeometric Kirchhoff–Love shell formulations for biological membranes. Comput Methods Appl Mech Eng2015; 293: 328–347.
41.
RoohbakhshanFDuongTXSauerRA.A projection method to extract biological membrane models from 3D material models. J Mech Behav Biomed Mater2016; 58: 90–104.
42.
GasserTCOgdenRWHolzapfelGA.Hyperelastic modelling of arterial layers with distributed collagen fibre orientations. J R Soc Interface2006; 3(6): 15–35.
43.
RoohbakhshanFSauerRA.Isogeometric nonlinear shell elements for thin laminated composites based on analytical thickness integration. J Micro Mol Phys2016; 01(03–04): 1640010.
44.
RoohbakhshanFSauerRA.Efficient isogeometric thin shell formulations for soft biological materials. Biomech Model Mechanobiol2017; 16(5): 1569–1597.
45.
CarreraEFazzolariFACinefraM.Thermal stress analysis of composite beams, plates and shells: Computational modelling and applications. Amsterdam: Academic Press, 2016.
46.
KrönerE.Allgemeine Kontinuumstheorie der Versetzungen und Eigenspannungen. Arch Ration Mech Anal1959; 4(1): 273.
47.
BesselingJF. A thermodynamic approach to rheology. In: ParkusHSedovLI (eds.) Irreversible aspects of continuum mechanics and transfer of physical characteristics in moving fluids: Symposia Vienna, June 22–28, 1966. Vienna: Springer, 16–53.
48.
LeeEH.Elastic–plastic deformation at finite strains. J Appl Mech1969; 36(1): 1–6.
49.
SteinmannP.On spatial and material settings of thermo-hyperelastodynamics. J Elast Phys Sci Solids2002; 66(2): 109–157.
50.
VujoševićLLubardaV.Finite-strain thermoelasticity based on multiplicative decomposition of deformation gradient. Theor Appl Mech2002; (28–29): 379–399.
51.
LubardaVA.Constitutive theories based on the multiplicative decomposition of deformation gradient: Thermoelasticity, elastoplasticity, and biomechanics. Appl Mech Rev2004; 57(2): 95–108.
52.
MarsdenJHughesT.Mathematical foundations of elasticity. Mineola: Dover, 1994.
53.
OgdenRW. Incremental statics and dynamics of pre-stressed elastic materials. Vienna: Springer, 2007, 1–26.
54.
ŠilhavýM.The mechanics and thermodynamics of continuous media. Berlin: Springer, 1997.
55.
LubardaV.On the Gibbs conditions of stable equilibrium, convexity and the second-order variations of thermodynamic potentials in nonlinear thermoelasticity. Int J Solids Struct2008; 45(1): 48–63.
56.
LubardaVA.Thermodynamic analysis based on the second-order variations of thermodynamic potentials. Theor Appl Mech2008; 35(1–3): 215–234.
57.
MieheCDiezJMGöktepeS, et al. Coupled thermoviscoplasticity of glassy polymers in the logarithmic strain space based on the free volume theory. Int J Solids Struct2011; 48(13): 1799–1817.
58.
GurtinMEMurdochAI.A continuum theory of elastic material surfaces. Arch Ration Mech Anal1975; 57(4): 291–323.
59.
GreenAENaghdiPM.On thermal effects in the theory of shells. Proc Royal Soc A1979; 365(1721): 161–190.
60.
MieheCApelN.Anisotropic elastic–plastic analysis of shells at large strains: A comparison of multiplicative and additive approaches to enhanced finite element design and constitutive modelling. Int J Numer Methods Eng2004; 61(12): 2067–2113.
61.
SteigmannDJ. Applications of polyconvexity and strong ellipticity to nonlinear elasticity and elastic plate theory. Vienna: Springer, 2010, 265–299.
62.
SimoJFoxD.On a stress resultant geometrically exact shell model. Part I: Formulation and optimal parametrization. Comput Methods in Appl Mech Eng1989; 72(3): 267–304.
63.
SimoJRifaiMFoxD.On a stress resultant geometrically exact shell model. Part IV: Variable thickness shells with through-the-thickness stretching. Comput Methods Appl Mech Eng1990; 81(1): 91–126.
64.
CirakFOrtizMSchröderP.Subdivision surfaces: A new paradigm for thin-shell finite-element analysis. Int J Numer Methods Eng2000; 47(12): 2039–2072.
65.
CirakFOrtizM.Fully -conforming subdivision elements for finite deformation thin-shell analysis. Int J Numer Methods Eng2001; 51(7): 813–833.
66.
LongQBornemannPBCirakF.Shear-flexible subdivision shells. Int J Numer Methods Eng2012; 90(13): 1549–1577.
67.
KiendlJBletzingerKULinhardJ, et al. Isogeometric shell analysis with Kirchhoff–Love elements. Comput Methods Appl Mech Eng2009; 198(49): 3902–3914.
KiendlJBazilevsYHsuMC, et al. The bending strip method for isogeometric analysis of Kirchhoff–Love shell structures comprised of multiple patches. Comput Methods Appl Mech Eng2010; 199(37): 2403–2416.
70.
KiendlJHsuMCWuMC, et al. Isogeometric Kirchhoff–Love shell formulations for general hyperelastic materials. Comput Methods Appl Mech Eng2015; 291: 280–303.
71.
DuongTXRoohbakhshanFSauerRA.A new rotation-free isogeometric thin shell formulation and a corresponding continuity constraint for patch boundaries. Comput Methods Appl Mech Eng2017; 316: 43–83.
72.
SauerRADuongTXCorbettCJ.A computational formulation for constrained solid and liquid membranes considering isogeometric finite elements. Comput Methods Appl Mech Eng2014; 271: 48–68.
73.
SauerRADuongTX.On the theoretical foundations of thin solid and liquid shells. Math Mech Solids2017; 22(3): 343–371.
74.
SchöllhammerDFriesTP.Kirchhoff–Love shell theory based on tangential differential calculus. Comput Mech2019; 64(1): 113–131.
75.
JeffersAE.Triangular shell heat transfer element for the thermal analysis of nonuniformly heated structures. J Struct Eng2016; 142(1): 04015084.
76.
ReddyJNChinCD.Thermomechanical analysis of functionally graded cylinders and plates. J Therm Stresses1998; 21(6): 593–626.
77.
El-AbbasiNMeguidSA.Finite element modeling of the thermoelastic behavior of functionally graded plates and shells. Int J Comput Eng Sci2000; 01(01): 151–165.
78.
CinefraMCarreraEBrischettoS, et al. Thermo-mechanical analysis of functionally graded shells. J Therm Stresses2010; 33(10): 942–963.
HolzapfelG.Nonlinear solid mechanics: A continuum approach for engineering. Chichester: Wiley, 2000.
82.
IbrahimbegovicA.Nonlinear solid mechanics: Theoretical formulations and finite element solution methods (Solid Mechanics and Its Applications, vol. 160). Dordrecht: Springer, 2009.
83.
SuranaKSOrthNJ.-Version hierarchical three dimensional curved shell element for heat conduction. Comput Mech1991; 7(5): 341–353.
84.
SuranaKOrthN.Three-dimensional curved shell element based on completely hierarchical -approximation for heat conduction in laminated composites. Comput Struct1992; 43(3): 477–494.
85.
LingCSSuranaK.-Version least squares finite element formulation for axisymmetric heat conduction with temperature-dependent thermal conductivities. Comput Struct1994; 52(2): 353–364.
86.
TemizerİWriggersP. Thermal contact conductance characterization via computational contact homogenization: A finite deformation theory framework. Int J Numer Methods Eng2010; 83(1): 27–58.
87.
Temizerİ. Multiscale thermomechanical contact: Computational homogenization with isogeometric analysis. Int J Numer Methods Eng2014; 97(8): 582–607.
SauerRAGhaffariRGuptaA.The multiplicative deformation split for shells with application to growth, chemical swelling, thermoelasticity, viscoelasticity and elastoplasticity. Int J Solids Struct2019; 174–175: 53–68.
90.
GhaffariRDuongTXSauerRA.A new shell formulation for graphene structures based on existing ab-initio data. Int J Solids Struct2018; 135: 37–60.
91.
GhaffariRSauerRA.A new efficient hyperelastic finite element model for graphene and its application to carbon nanotubes and nanocones. Finite Elem Anal Des2018; 146: 42–61.
92.
GreenAENaghdiPM.On electromagnetic effects in the theory of shells and plates. Philos Trans R Soc London, Ser A1983; 309(1510): 559–610.
BaghdasaryanGMikilyanM.Effects of magnetoelastic interactions in conductive plates and shells. Cham: Springer, 2016.
95.
DorfmannLOgdenRW.Nonlinear theory of electroelastic and magnetoelastic interactions. New York: Springer, 2016.
96.
DedeEMSchmalenbergPNomuraT, et al. Design of anisotropic thermal conductivity in multilayer printed circuit boards. IEEE Trans Compon Packag Manuf Technol2015; 5(12): 1763–1774.
97.
DedeEMZhouFSchmalenbergP, et al. Thermal metamaterials for heat flow control in electronics. J Electron Packag2018; 140(1): 010904.
98.
MalvernL.Introduction to the mechanics of a continuous medium (Prentice-Hall Series in Engineering of the Physical Sciences). Englewood Cliffs: Prentice-Hall, 1969.
99.
BaşarYWeichertD.Nonlinear continuum mechanics of solids: Fundamental mathematical and physical concepts. Berlin: Springer-Verlag, 2000.
100.
BonetJWoodR.Nonlinear continuum mechanics for finite element analysis. 2nd ed.Cambridge: Cambridge University Press, 2008.
TruesdellCNollWAntmanS.The non-linear field theories of mechanics. 3rd ed.Berlin: Springer-Verlag, 2004.
103.
MahnkenRShabanAPotenteH, et al. Thermoviscoplastic modelling of asymmetric effects for polymers at large strains. Int J Solids Struct2008; 45(17): 4615–4628.
104.
MindlinRDTierstenHF.Effects of couple-stresses in linear elasticity. Arch Ration Mech Anal1962; 11(1): 415–448.
105.
TadmorEMillerR.Modeling materials: Continuum, atomistic and multiscale techniques. Cambridge: Cambridge University Press, 2011.
106.
NeumannFEMeyerOE.Vorlesungen über die Theorie der Elasticität der festen Körper und des Lichtäthers, gehalten an der Universität Königsberg. Leipzig: BG Teubner, 1885.
107.
NewnhamRE.Properties of materials: Anisotropy, symmetry, structure. Oxford: Oxford University Press, 2005.
108.
NyeJ.Physical properties of crystals: Their representation by tensors and matrices. Oxford: Clarendon Press, 1985.
109.
ZhengQS.Two-dimensional tensor function representation for all kinds of material symmetry. Proc R Soc London, Ser A1993; 443(1917): 127–138.
110.
ZhengQS.Theory of representations for tensor functions: A unified invariant approach to constitutive equations. Appl Mech Rev1994; 47: 545.
111.
ZhengQSBoehlerJP.The description, classification, and reality of material and physical symmetries. Acta Mech1994; 102(1): 73–89.
112.
MenzelASteinmannP.A view on anisotropic finite hyper-elasticity. Eur J Mech A Solids2003; 22(1): 71–87.
113.
ReeseS.Meso-macro modelling of fibre-reinforced rubber-like composites exhibiting large elastoplastic deformation. Int J Solids Struct2003; 40(4): 951–980.
114.
ReeseSVladimirovIN. Anisotropic modelling of metals in forming processes. In: ReddyBD (ed.) IUTAM symposium on theoretical, computational and modelling aspects of inelastic media: Proceedings of the IUTAM symposium held at Cape Town, South Africa, January 14–18, 2008. Dordrecht: Springer, 2008, 175–184.
115.
SansourCKaršajISorićJ.On a formulation for anisotropic elastoplasticity at finite strains invariant with respect to the intermediate configuration. J Mech Phys Solids2007; 55(11): 2406–2426.
116.
SchröderJGruttmannFLöbleinJ.A simple orthotropic finite elasto-plasticity model based on generalized stress–strain measures. Comput Mech2002; 30(1): 48–64.
117.
EidelBGruttmannF.Elastoplastic orthotropy at finite strains: Multiplicative formulation and numerical implementation. Comput Mater Sci2003; 28(3): 732–742.
118.
SansourCKaršajISorićJ.A formulation of anisotropic continuum elastoplasticity at finite strains. Part I: Modelling. Int J Plast2006; 22(12): 2346–2365.
119.
SansourCKaršajISorićJ.On a numerical implementation of a formulation of anisotropic continuum elastoplasticity at finite strains. J Comput Phys2008; 227(16): 7643–7663.
120.
DeanASahraeeSReinosoJ, et al. A new invariant-based thermo-plastic model for finite deformation analysis of short fibre reinforced composites: Development and numerical aspects. Compos Part B2017; 125: 241–258.
121.
DeanAReinosoJSahraeeS, et al. Invariant-based finite strain anisotropic material model for fiber-reinforced composites. Cham: Springer, 2018, 83–110.
122.
GongYPengXYaoY, et al. An anisotropic hyperelastic constitutive model for thermoplastic woven composite prepregs. Compos Sci Technol2016; 128: 17–24.
123.
PengXGuoZDuT, et al. A simple anisotropic hyperelastic constitutive model for textile fabrics with application to forming simulation. Compos Part B2013; 52: 275–281.
124.
AlsayednoorJLennardFYuW, et al. Influence of specimen pre-shear and wrinkling on the accuracy of uniaxial bias extension test results. Compos Part A2017; 101: 81–97.
125.
DudescuCNaumannJStockmannM, et al. Characterisation of thermal expansion coefficient of anisotropic materials by electronic speckle pattern interferometry. Strain2006; 42(3): 197–205.
126.
MeissonnierFBussoEO’DowdN.Finite element implementation of a generalised non-local rate-dependent crystallographic formulation for finite strains. Int J Plast2001; 17(4): 601–640.
127.
WangKZhangJWangJ, et al. Anisotropic thermal expansion of monoclinic potassium lutetium tungstate single crystals. J Appl Phys2005; 98(4): 046101.
128.
HuMZhangXPoulikakosD.Anomalous thermal response of silicene to uniaxial stretching. Phys Rev B2013; 87: 195417.
129.
CasimirHBG.On Onsager’s principle of microscopic reversibility. Rev Mod Phys1945; 17: 343–350.
130.
de GrootSRMazurP. Extension of Onsager’s theory of reciprocal relations. I. Phys Rev1954; 94: 218–224.
131.
MazurPde GrootSR. Extension of Onsager’s theory of reciprocal relations. II. Phys Rev1954; 94: 224–226.
132.
OnsagerL.Reciprocal relations in irreversible processes. I. Phys Rev1931; 37: 405–426.
133.
OnsagerL.Reciprocal relations in irreversible processes. II. Phys Rev1931; 38: 2265–2279.
134.
PowersJM.On the necessity of positive semi-definite conductivity and Onsager reciprocity in modeling heat conduction in anisotropic media. J Heat Transf2004; 126(5): 670–675.
135.
SoretC.Sur l’étude expérimentale des coefficients rotationnels de conductibilité thermique. Arch Sci Phys Nat1893; 29: 355–357.
136.
VoigtW.Lehrbuch der Kristallphysik (mit Ausschluss der Kristalloptik). Leipzig: Teubner, 1910.
137.
VoigtW.Fragen der KristallphysikI.Über die rotatorischen Constanten der Wärmeleitung von Apatit und Dolomit. Nachr Ges Wiss Goettingen, Math-Phys Kl1903; 3(1): 87–89.
138.
FourierJ.Théorie analytique de la chaleur. Paris: Firmin Didot, père et fils, 1822.
139.
LienhardJ.A heat transfer textbook. 4th ed.Mineola: s Publications, 2013.
140.
HetnarskiREslamiM.Thermal stresses—Advanced theory and applications (Solid Mechanics and Its Applications, vol. 158). Dordrecht: Springer, 2008.
141.
LordHShulmanY.A generalized dynamical theory of thermoelasticity. J Mech Phys Solids1967; 15(5): 299–309.
ŞuhubiES. Thermoelastic solids. In: EringenAC (ed.) Continuum mechanics of single-substance bodies. New York: Academic Press, 1975, 173–265.
148.
MüllerI.The coldness, a universal function in thermoelastic bodies. Arch Ration Mech Anal1971; 41(5): 319–332.
149.
GreenAELawsN.On the entropy production inequality. Arch Ration Mech Anal1972; 45(1): 47–53.
150.
ChandrasekharaiahDS.Thermoelasticity with second sound: A review. Appl Mech Rev1986; 39(3): 355–376.
151.
ArpaciV.Conduction heat transfer. (Addison-Wesley Series in Mechanics and Thermodynamics). Reading, MA: Addison-Wesley, 1966.
152.
ReddyJ.An introduction to the finite element method (McGraw-Hill Series in Mechanical Engineering). New York: McGraw-Hill, 1993.
153.
NikishkovG.Programming finite elements in JavaTM. London: Springer, 2010.
154.
NithiarasuPLewisRSeetharamuK.Fundamentals of the finite element method for heat and mass transfer (Wiley Series in Computational Mechanics). Chichester: Wiley, 2016.
BoyceMCMontagutELArgonAS.The effects of thermomechanical coupling on the cold drawing process of glassy polymers. Polym Eng Sci1992; 32(16): 1073–1085.
157.
AldakheelF.Micromorphic approach for gradient-extended thermo-elastic-plastic solids in the logarithmic strain space. Continuum Mech Thermodyn2017; 29(6): 1207–1217.
158.
van der GiessenEKollmannFG.On mathematical aspects of dual variables in continuum mechanics. Part 1: Mathematical principles. Z Angew Math Mech1996; 76(8): 447–462.
159.
van der GiessenEKollmannFG.On mathematical aspects of dual variables in continuum mechanics. Part 2: Applications in nonlinear solid mechanics. Z Angew Math Mech1996; 76(9): 497–504.
160.
StumpfHHoppeU.The application of tensor algebra on manifolds to nonlinear continuum mechanics—invited survey article. Z Angew Math Mech1997; 77(5): 327–339.
161.
KintzelO.Fourth-order tensors—tensor differentiation with applications to continuum mechanics. Part II: Tensor analysis on manifolds. Z Angew Math Mech2006; 86(4): 312–334.
162.
KintzelOBaşarY.Fourth-order tensors—tensor differentiation with applications to continuum mechanics. Part I: Classical tensor analysis. Z Angew Math Mech2006; 86(4): 291–311.
163.
ItskovM.Tensor algebra and tensor analysis for engineers: With applications to continuum mechanics (Mathematical Engineering). Berlin: Springer International, 2015.
164.
JaviliAMcBrideASteinmannP, et al. A unified computational framework for bulk and surface elasticity theory: A curvilinear-coordinate-based finite element methodology. Comput Mech2014; 54(3): 745–762.
165.
SethB.Generalized strain measures with applications to physical problems. New York: Academic Press, 1964.
166.
BruhnsOT. The multiplicative decomposition of the deformation gradient in plasticity-origin and limitations. Cham: Springer, 2015, 37–66.
167.
BowerAF.Applied mechanics of solids. Boca Raton: CRC, 2009.
168.
MehnertMMathieu-PennoberTSteinmannP. On the influence of the coupled invariant in thermo-electro-elasticity. Cham: Springer, 2018, 533–554.
169.
EthirajGMieheC.Multiplicative magneto-elasticity of magnetosensitive polymers incorporating micromechanically-based network kernels. Int J Eng Sci2016; 102: 93–119.
170.
JasiukIOstoja-StarzewskiM. From lattices and composites to micropolar continua. Dordrecht: Springer, 2004, 175–212.
171.
TruesdellC.The elements of continuum mechanics. Berlin: Springer, 1967.
172.
KalidindiSR.Incorporation of deformation twinning in crystal plasticity models. J Mech Phys Solids1998; 46(2): 267–290.
173.
KalidindiSR. A crystal plasticity framework for deformation twinning. In: RaabeDRotersFBarlatF, et al. (eds.) Continuum scale simulation of engineering materials: Fundamentals—microstructures—process applications. Wiley, 2004, 543–560.
174.
ClaytonJD. Mechanical twinning in crystal plasticity. Dordrecht: Springer, 2011, 379–421.
175.
MazurP.Onsagers’s reciprocal relations and thermodynamics of irreversible processes. Period Polytech, Chem Eng1997; 41(2): 197.
176.
TruesdellC.Rational thermodynamics: A course of lectures on selected topics (McGraw-Hill Series in Modern Applied Mathematics). New York: McGraw-Hill, 1969.
177.
VerhásJ.Onsager’s reciprocal relations and some basic laws. J Comput Appl Mech2004; 5(1): 157–163.
178.
CimmelliVASellittoAJouD.A nonlinear thermodynamic model for a breakdown of the Onsager symmetry and the efficiency of thermoelectric conversion in nanowires. Proc R Soc London, Ser A2014; 470(2170).
179.
ZimmermannCToshniwalDLandisCM, et al. An isogeometric finite element formulation for phase transitions on deforming surfaces. Comput Methods Appl Mech Eng2019; 351: 441–477.
180.
McHughPAsaroRShihC.Computational modeling of metal matrix composite materials—I. isothermal deformation patterns in ideal microstructures. Acta Metall Mater1993; 41(5): 1461–1476.
181.
SrikanthAZabarasN.A computational model for the finite element analysis of thermoplasticity coupled with ductile damage at finite strains. Int J Numer Methods Eng1999; 45(11): 1569–1605.
182.
WangJMoumniZZhangW, et al. A thermomechanically coupled finite deformation constitutive model for shape memory alloys based on Hencky strain. Int J Eng Sci2017; 117: 51–77.
