This paper deals with a body that has a random 3D-distribution of two phase inclusions: spheroidal mutually parallel voids, and differently oriented reinforcing parallel stiff spheroidal short fibers. By the effective field approach the effective stiffness fourth order tensor is formulated and found numerically. Simultaneous and sequential embeddings of inclusions are compared. Damage evolution is described by a modified Vakulenko approach to the endochronic thermodynamics. A brief account of the problem of effective elastic symmetry is considered. The results of the theory are applied to the damage-elasto-viscoplastic strain of a reactor stainless steel AISI 316H.
KrönerE.Allgemeine Kontinuumstheorie der Versetzungen and Eigenspannungen, Arch Rational Mech Anal1960; 4: 273–334.
3.
EshelbyJD.The determination of the elastic field of an ellipsoidal inclusion, and related problems. Proc Roy Society1957; 241: 376–396.
4.
KachanovM.Elastic solids with many cracks and related problems. In: HutchinsomJWWuT (eds) Advances in applied mechanics. Volume 30. New York: Academic Press, 1993, pp.259–445.
5.
KanaunSKKudrjavcevaLT.Thermal stresses in composites with spherically layered inclusions. Izv ANSSSR Mekhanika Tverdogo Tela, 1987; 4: 113–121.
6.
KanaunSKLevinVM.Effective field melthod in mechanics of composites. Petrozavodsk, Russia: Petrozavodsk University Edition, 1993.
7.
KanaunSKJeulinD.Elastic properties of hybrid composites by the effective field approach. J Mech Phys Solids2001; 49: 2339–2367.
8.
MarkovKZJustification of an effective field method in elasto-statics of heterogeneous solids. J Mech Phys Solids2001; 49: 2621–2634.
9.
WillisJR.Elasticity theory of composites. In: HopkinsHGSewellMJ (eds) Mechanics of solids. Oxford: Pergamon, 1982, pp.653–686.
10.
VakulenkoAA.Superposition in continuum rheology. Izv AN SSSR Mekhanika Tverdogo Tela1970; 1: 69–74.
11.
MicunovicM.Thermodynamical and self-consistent approach to inelastic ferromagnetic polycrystals. Arch Mech2006; 58 (4–5): 393–430.
12.
KanaunSKChudnovskiAI.A model of quasibrittle fracture of solids. Int J Damage Mech1999; 8: 18–40.
13.
MuraT.Micromechanics of defects in solids. Dodrecht: Martinus Nijhoff, 1988.
KuninIASosninaEG. (1971) Ellipsoidal inhomogeneity in an elastic medium (in Russian), Doklady Akademii Nauk SSSR, 1971; 199: 571–574.
16.
YaguchiMBussoEP.On the accuracy of self-consistent elasticity formulations for directionally solidified poIycrystals aggregates, Int J Solids Structures2005; 42: 1073.
17.
KuninIA.Elastic media with microstructure. Berlin: Springer Series in Solid State Sciences, 1983.
18.
MicunovicM.Self-consistent method applied to quasi-rate dependent polycrystals. Phil Magazine2005; 85(33–35): 4031–4054.
19.
MicunovicMKudrjavcevaLSumaracD.Thermoinelasticity of damaged elastomers by self consistent method. Int J Damage Mechanics2008; 17: 539–565.
20.
MorrisPR.J Appl Crystallography2006; 39: 502.
21.
ShermegorTD.Theory of elasticity of micro-inhomogeneous media. Moscow: Nauka, 1977.
22.
RychlewskiJ.A qualitative approach to Hooke’s tensors. Part I. Arch Mech2000; 52: 737–759.
23.
Kowalczyk–GajewskaK. (2011) Micromechanical modelling of metals and alloys of high specific strength. Warsaw: IFTR Reports, 2011.
24.
CowinSC.The representation of the linear elastic symmetries by sets of vectors. Math Mech Solids2010; 16(6): 615–624.
25.
MicunovicM.Low order inelastic micromorphic polycrystals. Theoret Appl Mech2002; 28–29: 235–259.
26.
MicunovicM.On the thermal elastoplastic transition in viscoplasticity of metals. Facta Universitatis1992; 1(2): 155–168.
27.
MarkovKZ.On a microstructural model of damage in solids. Int J Engng Sci1995; 33: 139–150.
28.
KachanovLM.Introduction to continuum damage mechanics. Lancaster, UK: Kluwer, 1986.
