Sage Journals: Discover world-class research

Abstract

With the continuous advancement of the Industrial Internet of Things, high-end turbomachinery, especially multi-support rotor equipment, is increasingly developed toward artificial intelligence. The healthy operation and maintenance of equipment have garnered widespread attention. Aimed at turbine generator sets with N+1 supports and supercritical rotor characteristics, a novel integrated fault diagnosis model algorithm based on VGG-SVM is proposed. This algorithm is capable of identifying multi-dimensional fused fault features and demonstrates advantages of high accuracy, good stability, and strong robustness. Typical characteristic mechanisms of structural faults, such as rotor imbalance, misalignment, and loosening, are introduced. A two-span three-support rotor test bench is constructed to conduct fault simulation experiments, during which data are collected and diagnostic tests of the algorithm are performed. Results indicate that the diagnostic accuracy of the integrated algorithm is on average 10%–20% higher than that of other algorithms, with superior model generalization capability. Finally, the algorithm is tested with 120 sets of test data, and the diagnostic accuracy is found to exceed 99%.

Keywords

double-span rotor system machine learning fault diagnosis equipment condition monitoring rotating machine

Get full access to this article

View all access options for this article.

References

Arunthavanathan

Khan

Ahmed

, et al. (2022) Autonomous fault diagnosis and root cause analysis for the processing system using one-class SVM and NN permutation algorithm. Industrial & Engineering Chemistry Research 61(3): 1408–1422. https://doi.org/10.1021/acs.iecr.1c02731

Chen

Wang

Qiao

, et al. (2018) Basic research on machinery fault diagnostics: past, present, and future trends. Frontiers of Mechanical Engineering 13: 264–291. https://doi.org/10.1007/s11465-018-0472-3

Choudhury

Viitala

Kurvinen

, et al. (2020) Unbalance estimation for a large flexible rotor using force and displacement minimization. Machines 8(3): 39. https://doi.org/10.3390/machines8030039

Cui

Huang

Zhang

(2017) Quantitative and localization diagnosis of a defective ball bearing based on vertical–horizontal synchronization signal analysis. IEEE Transactions on Industrial Electronics 64(11): 8695–8706. https://doi.org/10.1109/tie.2017.2698359

Chen

, et al. (2023) Deep learning GAN-based data generation and fault diagnosis in the data center HVAC system. Energy and Buildings 289: 113072. https://doi.org/10.1016/j.enbuild.2023.113072

Faysal

Ngui

Lim

, et al. (2021) Noise eliminated ensemble empirical mode decomposition scalogram analysis for rotating machinery fault diagnosis. Sensors 21(23): 8114. https://doi.org/10.3390/s21238114

Han

Cui

Fan

, et al. (2019) Least squares support vector machine (LS-SVM)-based chiller fault diagnosis using fault indicative features. Applied Thermal Engineering 154: 540–547. https://doi.org/10.1016/j.applthermaleng.2019.03.111

Zhu

Jiang

, et al. (2015) Fault diagnosis of rotating machinery with a novel statistical feature extraction and evaluation method. Mechanical Systems and Signal Processing 50: 414–426. https://doi.org/10.1016/j.ymssp.2014.05.034

Lin

Zhao

Wang

, et al. (2021) Nonlinear responses of a rotor-bearing-seal system with pedestal looseness. Applied Sciences 11(17): 8047.

10.

MacCamhaoil

(2016) Static and dynamic balancing of rigid rotors. Bruel & Kjaer application notes, BO, 0276-12.

11.

Nan

Yang

(2024) Misalignment and rub-impact coupling dynamics of power turbine rotor with offset disk. Applied Sciences 14(3): 1298. https://doi.org/10.3390/app14031298

12.

Nath

Sharma

Udmale

, et al. (2020) An early classification approach for improving structural rotor fault diagnosis. IEEE Transactions on Instrumentation and Measurement 70: 1–13. https://doi.org/10.1109/tim.2020.3043959

13.

Nejad

Keller

Guo

, et al. (2022) Wind turbine drivetrains: state-of-the-art technologies and future development trends. Wind Energy Science 7(1): 191–213. https://doi.org/10.5194/wes-7-387-2022

14.

Riaz

Elahi

Javaid

, et al. (2017) Vibration feature extraction and analysis for fault diagnosis of rotating machinery-a literature survey. Asia Pacific Journal of Multidisciplinary Research 5(1): 103–110.

15.

Szewczyk

Barczewski

Staszewski

, et al. (2025) Cointegration approach for vibration-based misalignment detection in rotating machinery under varying load conditions. Sensors 25(21): 6764. https://doi.org/10.3390/s25216764

16.

Wang

Xiong

(2021) Vibration and stability analysis of a bearing–rotor system with transverse breathing crack and initial bending. Machines 9(4): 79. https://doi.org/10.3390/machines9040079

17.

Wang

Yang

, et al. (2023) Effect of static and dynamic misalignment of rolling bearing on nonlinear vibration characteristics of rotor system. Journal of Central South University 30(3): 871–903.

18.

Sun

Zhang

, et al. (2021) A power transformer fault diagnosis method based on hybrid improved seagull optimization algorithm and support vector machine. IEEE Access 10: 17268–17286.

19.

Xia

Liang

Zheng

, et al. (2022) Residual-hypergraph convolution network: a model-based and data-driven integrated approach for fault diagnosis in complex equipment. IEEE Transactions on Instrumentation and Measurement 72: 1–11. https://doi.org/10.1109/tim.2022.3227609

20.

Xing

Zhang

Wang

(2023) Adaptive variational mode decomposition for bearing fault detection. Journal of Signal and Information Processing 14: 9–24. https://doi.org/10.4236/jsip.2023.142002

21.

Huang

Xiao

(2018) Fault diagnosis based on an approach combining a spectrogram and a convolutional neural network with application to a wind turbine system. Energies 11(10): 2561. https://doi.org/10.3390/en11102561

22.

Yuan

Lian

Kang

, et al. (2020) Rolling bearing fault diagnosis based on convolutional neural network and support vector machine. IEEE Access 8: 131322–131333. https://doi.org/10.1109/access.2020.3012053

23.

Zhou

Yang

, et al. (2023) PT-Informer: a deep learning framework for nuclear steam turbine fault diagnosis and prediction. Machines 11(8): 846. https://doi.org/10.3390/machines11080846

A typical fault intelligent diagnosis algorithm based on VGG-SVM for N+1 rotor systems of steam turbine generators

Abstract

Keywords

Get full access to this article

References