The recent methods that guarantee the stability of the reduced-order models are Mihailov stability, improved Pade approximation and truncation, improved generalized pole clustering, moment matching and salp swarm optimization. Further, these methods could overcome the limitations such as non-uniqueness, pole clustering, gain adjustment and difficulty to maintain the dominant roots in the lower order system for non-minimum higher order plants. This research emphasizes the design of the proposed compensating algorithm by using an additional open loop zero for the stable reduced-order models of large-scale single-input single-output linear time-invariant continuous time systems. The results of the proposed algorithm are compared with the existing compensating methods and the design is validated and illustrated numerically.
AhamedNSikanderASinghG (2022a) A novel reduction approach for linear system approximation. Circuits, Systems, and Signal Processing41: 700–724.
2.
AhamedNSikanderASinghG (2022b) Order diminution and its application in controller design using salp swarm optimization technique. International Journal of System Assurance Engineering and Management13: 933–943.
3.
BasilioJCMatosSR (2002) Design of PI and PID controllers with transient performance specification. IEEE Transactions on Education45(4): 364–370.
4.
ChenTCChangCYHanKW (1979) Reduction of transfer functions by the stability-equation method. Journal of the Franklin Institute308(4): 389–404.
5.
DavisonEJ (1966) A method for simplifying linear dynamic systems. IEEE Transactions on Automatic Control11(1): 93–101.
6.
DeepaSNSugumaranG (2011) Design of PID controller for higher order continuous systems using MPSO based model formulation technique. International Journal of Electrical and Information Engineering5(8): 949–955.
7.
GaingZL (2004) A particle swarm optimization approach for optimum design of PID controller in AVR system. IEEE Transactions on Energy Conversion19(2): 384–391.
8.
GaneshCJebaSSaranyaR, et al. (2009) A non-iterative controller design for a BLDC drive system. In: International Conference on Advances in Recent Technologies in Communication and Computing. India: Kottayam, pp. 141–145.
9.
GaneshCPatnaikSK (2012) Artificial neural network based proportional plus integral plus derivative controller for a brushless DC position control system. Journal of Vibration and Control18(14): 2164–2175.
10.
GaneshCPatnaikSK (2015) A simple first order compensator for brushless direct current drive based position control system. Journal of Vibration and Control21(4): 647–661.
11.
GaneshCPrabhuMRajalakshmiM, et al. (2012) ANN based PID controlled brushless DC drive system. ACEEE International Journal on Electrical and Power Engineering3(1): 45–48.
12.
GaneshCShanmugasundaramRSingaravelanA (2019) Design of a non-iterative compensator for type 1 higher order systems. Lecture Notes in Electrical Engineering602: 355–368.
13.
GoyalRParmarGSikanderG (2019) A new approach for simplification and control of linear time invariant systems. Microsystem Technologies25: 599–607.
14.
HaneefHGaneshC (2015) Investigations on the design aspects of first order controller for type 1 third order system. International Journal of Applied Engineering Research10(10): 9438–9445.
15.
HuttonMFFriedlandB (1975) Routh approximations for reducing order of linear, time-invariant systems. IEEE Transactions on Automatic Control20(3): 329–333.
16.
KrishnamurthyVSeshadriV (1978) Model reduction using the Routh stability criterion. IEEE Transactions on Automatic Control23(3): 729–731.
17.
LangholzGFeinmesserD (1978) Model order reduction by Routh approximations. International Journal of Systems Science9(5): 493–496.
18.
LeeH (2005) A new phase-lead design method using the root locus diagrams. IEEE Transactions on Automatic Control50(11): 1887–1891.
19.
LohAPCaiXTanWW (2004) Auto-tuning of phase lead/lag compensators. Automatica40(3): 423–429.
20.
PrajapatiAKDurarao RayuduVGSikanderA, et al. (2020) A new technique for the reduced order modelling of linear dynamic systems and design of controller. Circuits, Systems, and Signal Processing39(10): 4849–4867.
21.
PrajapatiAKPrasadR (2019) A new model order reduction method for the design of compensator by using moment matching algorithm. Transactions of the Institute of Measurement and Control42(3): 472–484.
22.
PrajapatiAKPrasadR (2020a) A new model reduction method for the linear dynamic systems and its application for the design of compensator. Circuits, Systems, and Signal Processing39(5): 2328–2348.
23.
PrajapatiAKPrasadR (2020b) A novel order reduction method for linear dynamic systems and its application for designing of PID and lead/lag compensators. Transactions of the Institute of Measurement and Control43(5): 1226–1238.
24.
PrajapatiAKPrasadR (2022) A new generalized Pole clustering-based model reduction technique and its application for design of controllers. Transactions of the Institute of Measurement and Control42(3): 472–484.
25.
SainiRParmarGGuptaR, et al. (2022) An enhanced tuning of PID controller via hybrid stochastic fractal search algorithm for control of DC motor. Lecture Notes in Electrical Engineering820: 185–194.
26.
ShamashY (1974) Stable reduced-order models using Pade-type approximations. IEEE Transactions on Automatic Control19(5): 615–616.
27.
ShanmugasundaramRGaneshCSingaravelanA (2020) ANN-based controllers for improved performance of BLDC motor drives. Lecture Notes in Electrical Engineering665: 73–87.
28.
ShanmugasundaramRGaneshCSingaravelanA, et al. (2021) High-performance ANFIS-based controller for BLDC motor drive. Smart Innovation, Systems and Technologies243: 435–449.
29.
ShanmugasundramRGaneshCYadaiahN, et al. (2008) Compensator design by pole-zero adjustment for a typical position control system. In: Fourth International Conference on Information Automation for Sustainability. Srilanka: Colombo, pp. 19–24.
30.
ShanmugasundramRZakariahKMYadaiahN (2012) Implementation and performance analysis of digital controllers for brushless DC motor drives. IEEE/ASME Transactions on Mechatronics19(1): 213–224.
31.
SikanderAPrasadR (2015) Soft computing approach for model order reduction of linear time invariant systems. Circuits, Systems, and Signal Processing34(11): 3471–3487.
32.
SinhaAKPalJ (1990) Simulation based reduced order modelling using a clustering technique. Computers and Electrical Engineering16(3): 159–169.
33.
VinodhiniRGaneshCPatnaikSK (2012) Genetic algorithm optimized on-line neuro-tuned robust position control of BLDC motor. In: 2012 IEEE Students’ Conference on Electrical, Electronics and Computer Science. 1-2 March 2012, India: Bhopal, pp. 1–4.
34.
WangD (2009) Synthesis of phase-lead/lag compensators with complete information on gain and phase margins. Automatica45(4): 1026–1031.
35.
WangF (2003) The exact and unique solution for phase-lead and phase-lag compensation. IEEE Transactions on Education46(2): 258–262.
36.
WangQGYeZHangCC (2006) Tuning of phase-lead compensators for exact gain and phase margins. Automatica42(2): 349–352.
37.
YeungKSWongKWChenK (1998) A non-trial-and-error method for lag-lead compensator design. IEEE Transactions on Education41(1): 76–80.
38.
ZhaoJLiTQianJ (2005) Application of particle swarm optimization algorithm on robust PID controller tuning. Lecture Notes in Computer Science3612: 948–957.
