In this paper, a new approach is proposed based on data fusing with vibration signals using time-frequency parameters, probabilistic principal component analysis (PPCA) and statistical inference, for improving the accuracy and visibility of damage identification for numerical control (NC) machine tools. Time-frequency feature principal components are put forward, which extracted from eight dimensionless parameters statistically in the time and frequency domains by PPCA. The Chi-2 statistic is established according to statistical inference principle, and the feature figure of principal components is built that can acquire damage distribution of tools by measured data. An empirical analysis in NC milling machine tools is developed, and the result shows high accuracy and visibility of the proposed approach.
Alvarez M and Henao R (2006) Probabilistic kernel principal component analysis through time. In: Neural Information Processing. Berlin: Springer Publishers: 747–754.
3.
AmerWGrosvenorRIPrickettPW (2006) Sweeping filters and tooth rotation energy estimation (TREE) techniques for machine tool condition monitoring. International Journal of Machine Tools and Manufacture46(9): 1045–1052.
4.
Bayly PV, Mann BP, Schmitz TL, Peters DA, Stepan G and Insperger T (2002) Effects of radial immersion and cutting direction on chatter stability in end milling. In Proceedings of the ASME International Mechanical Engineering Conference and Exposition, vol. 13, New Oeleans, July, pp. 351–363.
5.
CarnapR (1962) Logical Foundations of Probability, 2nd edn. Chicago: University of Chicago Press.
6.
ChenBChenXLiBHeZCaoHCaiG (2011) Reliability estimation for cutting tools based on logistic regression model using vibration signals. Mechanical Systems and Signal Processing25(7): 2526–2537.
7.
Chen JinglongZi YanyangHe ZhengjiaWang Xiaodong (2012) Construction of adaptive redundant multiwavelet packet and its application to compound faults detection of rotating machinery. Science China Technological Sciences55(8): 2083–2090.
8.
Chen YonghuiLi ZhitanLi Haihong (2006) Failure diagnosis based on vibration testing of XA6132 milling machine[J]. Modern Manufacturing Engineering▪(3): 85–87. [in Chinese].
9.
Chernoff H and Lehmann EL (2012) The use of maximum likelihood estimates in chi- 2 tests for goodness of fit. In: Selected Works of EL Lehmann. USA: Springer: 541–549.
10.
ChiementinXKilunduBRasolofondraibeLCrequySPottierB (2012) Performance of wavelet denoising in vibration analysis: highlighting. Journal of Vibration and Control18(6): 850–858.
11.
DaiLWangJ (2007) The effects of workpiece deflection and motor features on quality of machining process – nonlinear vibrations analysis. Journal of Vibration and Control13(5): 557–582.
12.
FengZLiangMChuF (2013) Recent advances in time-frequency analysis methods for machinery fault diagnosis: a review with application examples. Mechanical Systems and Signal Processing38(1): 165–205.
13.
FuX (2009) Research on vibration of rotor by application of the improved harmonic wavelet. Analog Integrated Circuits and Signal Processing59(2): 201–205.
14.
JachanMMatzGHlawatschF (2007) Time-frequency ARMA models and parameter estimators for under spread non stationary random processes. IEEE Transcation Signal Process55(9): 4366–4381.
15.
JenaDPPanigrahiSNKumarR (2013) Gear fault identification and localization using analytic wavelet transform of vibration signal. Measurement46(3): 1115–1124.
16.
KankarPKSharmaSCHarshaSP (2011) Rolling element bearing fault diagnosis using autocorrelation and continuous wavelet transform. Journal of Vibration and Control17(14): 2081–2094.
17.
KankarPKSharmaSSHarshaSP (2013) Vibration signature analysis of a high speed rotor supported on ball bearings due to localized defects. Journal of Vibration and Control19(12): 1833–1853.
18.
LeiYLinJHeZZuoMJ (2013) A review on empirical mode decomposition in fault diagnosis of rotating machinery. Mechanical Systems and Signal Processing35(1): 108–126.
19.
LiBZhangPLMaoQMiSSLiuPY (2013) Gear fault detection using adaptive morphological gradient lifting wavelet. Journal of Vibration and Control19(11): 1646–1657.
20.
LiFMengGYeLChenP (2008) Wavelet transform-based higher-order statistics for fault diagnosis in rolling element bearings. Journal of Vibration and Control14(11): 1691–1709.
21.
JunjieLWang JieWang MeiWu Yue (2010) Research on tool wear condition monitoring based on combination of SOM and HMM. China Mechanical Engineering21(13): 1531–1535. [in Chinese].
22.
MarchelekKPajorMPowakaB (2002) Vibrostability of the milling process described by the time-variable parameter model. Journal of Vibration and Control8(4): 467–479.
23.
NyamundandaGBrennanLGormleyIC (2010) Probabilistic principal component analysis for metabolomic data. BMC Bioinformatics11(1): 571.
24.
ParusAPowałkaBMarchelekKDomekSHoffmannM (2013) Active vibration control in milling flexible workpieces. Journal of Vibration and Control19(7): 1103–1120.
25.
Raytchev B, Yoda I and Sakaue K (2004) Head pose estimation by nonlinear manifold learning. In Proceedings of the 17th ICPR on Pattern Recognition, Cambridge, UK, August, pp. 462–466.
26.
Rice J (2006) Mathematical statistics and data analysis. 3rd edn, Cengage Learning Press, Appendix B - A8.
27.
Rodolfo HaberEJose JimenezERonei PeresCJose AliqueR (2004) An investigation of tool-wear monitoring in a high-speed machining process. Sensors Actuators A: Phys116(3): 539–545.
28.
Shen ZhigangHe NingLi Liang (2009) Monitoring of tool wear in hard milling. China Mechanical Engineering20(13): 1582–1586. [in Chinese].
29.
SinghMKumarR (2013) Thrust bearing groove race defect measurement by wavelet decomposition of pre-processed vibration signal. Measurement46(9): 3508–3515.
30.
Sun H, Zi Y and He Z (2013b) Wind turbine fault detection using multiwavelet denoising with the data-driven block threshold. Applied Acoustics, Epub ahead of print 29 June 2013. http://dx.doi.org/10.1016/j.apacoust.2013.04.016.
31.
SunQTangYLuWYJiY (2005a) Feature extraction with discrete wavelet transform for drill wear monitoring. Journal of Vibration and Control11(11): 1375–1396.
32.
SunWYangGAChenQPalazogluAFengK (2013a) Fault diagnosis of rolling bearing based on wavelet transform and envelope spectrum correlation. Journal of Vibration and Control19(6): 924–941.
33.
SunXMarquezHJChenT (2005b) An improved PCA method with application to boiler leak detection[J]. ISA Transactions44(3): 379–397.
34.
TippingMEBishopCM (1999) Probabilistic principal component analysis. Journal of the Royal Statistical Society: Series B – Statistical Methodology61: 611–622.
35.
Van der MaatenLJPPostmaEOVan Den HerikHJ (2009) Dimensionality reduction: a comparative review. Journal of Machine Learning Research10: 1–41.
36.
VenkatarajanMSBraunW (2004) New quantitative descriptors of amino acids based on multidimensional scaling of a large number of physical chemical properties. Journal of Molecular Modeling7(12): 445–453.
37.
WangHChenSHuZ (2008) Probabilistic two-dimensional principal component analysis and its mixture model for face recognition. Neural Computing and Applications17(5–6): 541–547.
38.
WangXZiYHeZ (2011) Multiwavelet denoising with improved neighboring coefficients for application on rolling bearing fault diagnosis. Mechanical Systems and Signal Processing25(1): 285–304.
39.
XiFFSunQKrishnappaG (2000) Bearing diagnostics based on pattern recognition of statistical parameters. Journal of Vibration and Control6(3): 375–392.
40.
XieHHuangM (2013) Research of numerical control machine tools wear monitoring method based on vibration testing. Instrument Technique and Sensor2: 73–75.
41.
Xu ZhangsuiFang LiqingWang Xiwu (2000) Diagnosis Principle and Application for the Fault Information, Beijing: National Defense Industry Press, pp. 104–105.
42.
YanRGaoRX (2005) An efficient approach to machine health diagnosis based on harmonic wavelet packet transform. Robotics and Computer-Integrated Manufacturing21(4): 291–301.
43.
ZaghbaniILamraouiMSongmeneVThomasMEl BadaouiM (2011) Robotic high speed machining of aluminum alloys. Advanced Material Research188: 584–589.
44.
ZhangJDengXZhangZ (2011) Probabilistic kernel PCA with application. Computer Engineering and Applications47(4): 165–167.
