The purpose of this work is to increase the online availability of industrial gas compression installations. By prevention against the failures in gas turbines, used in this gas compression installation. In this work a new vibrations supervision approach based on parity space is used, this will guarantee us the optimal availability of this system. The obtained results show clearly how to ensure a reliable and safe operation in gas compression plants to economically recover the transported gas.
BolaersFCousinardODronJ-P (2011) Comparison of denoising methods for the early detection of fatigue bearing defects by vibratory analysis. Journal of Vibration and Control17(13): 1983–1993.
2.
DebrayKDronJ-PChiementinX (2011) Effect of cascade methods on vibration defects detection. Journal of Vibration and Control17(4): 567–577.
3.
EwinsDJ (2010) Control of vibration and resonance in aero engines and rotating machinery – an overview. International Journal of Pressure Vessels and Piping87(09): 504–510.
4.
Forbes GL and Randall RB (2007) Simulated gas turbine casing response to rotor blade pressure excitation. In Proceedings of the 5th Australasian Congress on Applied Mechanics, ACAM 2007, Brisbane, Australia, 10--12 December 2007.
5.
Grondahl CM, Guiler ME, Jurczynski GE and Zell R (1990) Performance and reliability improvements for MS3002 and MS5001 turbines in pipeline applications. In Proceedings of the Petroleum and Chemical Industry Conference: Industry Applications Society 37th Annual, Houston, TX, USA, pp. 135–144.
6.
GuemanaMAissaniSHafaifaA (2011) Use a new calibration method for gas pipelines: an advanced method improves calibrating orifice flowmeters while reducing maintenance costs. Hydrocarbon Processing Journal90(08): 63–70.
7.
HafaifaADaoudiAGuemanaM (2011a) SCADA for surge control: using a SCADA network to handle surge control in gas suppression systems in pipelines. Control Global Journal of ISA Transactions24(03): 69–71.
8.
HafaifaADaoudiALaroussiK (2011b) Application of fuzzy diagnosis in fault detection and isolation of the compression system protection. Control and Intelligent Systems ACTA Press39(03): 151–158.
9.
HafaifaALaaouadFLaroussiK (2011c) A numerical structural approach to surge detection and isolation in compression systems using fuzzy logic controller. International Journal of Control, Automation, and Systems09(01): 69–79.
10.
KanogluMDincerIRosenMA (2007) Understanding energy and exergy efficiencies for improved energy management in power plants. Energy Policy35(01): 3967–3978.
11.
KessentiniSChouraSNajarFFranchekMA (2010) Modeling and dynamics of a horizontal axis wind turbine. Journal of Vibration and Control16(13): 2001–2021.
12.
KulikovGGThompsonHA (2004) Dynamic modelling of gas turbines: identification, simulation, condition monitoring and optimal control. Series: Advances in Industrial Control. 1st ed. Springer.
13.
KumarSRoyNGanguliR (2007) Monitoring low cycle fatigue damage in turbine blade using vibration characteristics. Mechanical Systems and Signal Processing21(01): 480–501.
14.
LauYLLeungRCKSoRMC (2007) Vortex-induced vibration effect on fatigue life estimate of turbine blades. Journal of Sound and Vibration307(3-5-6): 698–719.
15.
Tsai Gwo-Chung (2004) Rotating vibration behavior of the turbine blades with different groups of blades. Journal of Sound and Vibration271(3--5, 6): 547–575.
16.
Van Schrick D (1993) Estimator schemes for instrument fault detection and isolation. In Proceedings of the IEEE International Conference on Systems, Man and Cybernetics, Le Touquet, 17--20 October 1993, pp. 406–411.
17.
VardarNEkerimA (2007) Failure analysis of gas turbine blades in a thermal power plant. Engineering Failure Analysis14(04): 743–749.
18.
WalkerBKGaiE (1979) Fault detection threshold determination techniques using Markov theory. International Journal Guidance, Control and Dynamics02(04): 313–319.
19.
Weber P, Gentil S, Ripoll P, and Foulloy L (1999) Multiple fault detection and isolation. In Proceedings of the 14th IFAC World Congress P (07e-092), Beijing, 5--9 July 1999, pp. 223–228.
20.
Weiss JL (1988) Threshold computations for detection of failures in SISO systems with transfer function errors. In Proceedings of the American Control Conference, Atlanta, USA, 15--17 June 1988, pp. 2213–2218.
21.
WillskyAS (1976) A survey of design methods for failure detection in dynamic systems. Automatica Journal12(1): 601–611.
22.
YuCLeeC (1991) Fault diagnosis based on qualitative/quantitative process knowledge. AICHE Journal37(04): 617–628.
