Sage Journals: Discover world-class research

Abstract

This paper presents the simulation and hardware implementation of a hill-climbing (HC) modified fuzzy-logic (FL) maximum power point tracking (MPPT) control scheme used in photovoltaic (PV) power systems with the direct control method. The conventional HC method is used to improve the FL search method and eliminate their drawbacks. The main difference of the proposed method to the existing MPPT control method includes that it offers fast and accurate tracking to the maximum power point under uniform radiation or partial shading conditions as compared to the conventional FL method, and it eliminates the proportional-integral control loop. Contributions are made in several aspects such as converter design, simulation, controller programming, and experimental setup. Simulation and experimentation results are provided to demonstrate the validity of the proposed hill-climbing modified fuzzy-logic controller.

Keywords

Fuzzy-logic hardware implementation hill-climbing maximum power point tracking partial shading

Get full access to this article

View all access options for this article.

References

Ahmed

Miyatake

(2008) A novel maximum power point tracking for photovoltaic applications under partially shaded insolation conditions. Electric Power Systems Research 78: 777–784.

Al-Atrash

Batarseh

Rustom

(2010) Effect of measurement noise and bias on hill-climbing MPPT algorithms. IEEE Transactions on Aerospace and Electronic Systems 46: 745–760.

Chowdhury

Saha

(2010) Maximum power point tracking of partially shaded solar photovoltaic arrays. Solar Energy Materials and Solar Cells 94: 1441–1447.

Femia

Granozio

Petrone

(2007) Predictive & adaptive MPPT perturb and observe method. IEEE Transactions on Aerospace and Electronic Systems 43: 934–950.

Gao

Dougal

Liu

(2009) Parallel-connected solar PV system to address partial and rapidly fluctuating shadow conditions. IEEE Transactions on Industry Electronics 56: 1548–1556.

Hiyama

Kitabayashi

(1997) Neural network based estimation of maximum power generation from PV module using environmental information. IEEE Transactions on Energy Conversion 12: 241–246.

Liu

Wang

(2011) The combined fuzzy and PO MPPT method for PV materials under partially shaded conditions. Advanced Materials Research 321: 80–83.

Liu

Sun

(2011a) A survey of China's low-carbon application practice - opportunity goes with challenge. Renewable & Sustainable Energy Reviews 15: 2895–2903.

Liu

Sun

(2011b) The development and application practice of neglected tidal energy in China. Renewable & Sustainable Energy Reviews 15(2): 1089–1097.

10.

Miyatake

Veerachary

Toriumi

(2011) Maximum power point tracking of multiple photovoltaic arrays: a PSO approach. IEEE Transactions on Aerospace and Electronic Systems 47: 367–380.

11.

Safari

Mekhilef

(2011) Simulation and hardware implementation of incremental conductance MPPT with direct control method using cuk converter. IEEE Transactions on Industry Electronics 58: 1154–1161.

12.

Syafaruddin E, Karatepe and Hiyama T (2009) Artificial neural network-polar coordinated fuzzy controller based maximum power point tracking control under partially shaded conditions. IET Renewable Power Generation 3: 239–253.

Simulation and hardware implementation of a hill-climbing modified fuzzy-logic for maximum power point tracking with direct control method using boost converter

Abstract

Keywords

Get full access to this article

References