A closed-form calculation is presented for the analysis of the period-doubling bifurcation in the time-periodic delay-differential equation model of interrupted machining processes such as milling where the nonlinearity is essentially nonsymmetric. We prove the subcritical sense of this period-doubling bifurcation and approximate the emerging period-two oscillations by the Lyapunov—Perron method for computing the center manifold and by calculating the Poincaré—Lyapunov constant of the bifurcation analytically at certain characteristic parameter values. The existence of the unstable period-two oscillations around the stable stationary cutting is confirmed using a numerical continuation algorithm developed for time-periodic delay-differential equations.
Altintas, Y. and Budak, E., 1995, "Analytical prediction of stability lobes in milling," Annals of the CIRP44(1), 357-362.
2.
Bayly, P.V., Halley, J.E., Mann, B., and Davies, M.A., 2003, "Stability of interrupted cutting by temporal finite element analysis," ASME Journal of Manufacturing Science and Engineering125(2), 220-225.
3.
Carr, J., 1981, Applications of Centre Manifold Theory, Springer, New York.
4.
Chicone, C. and Latushkin, Y., 1997, "Center manifold for infinite dimensional nonautonomous differential equations," Journal of Differential Equations141, 356-399.
5.
Clement, P., Diekmann, O., Gyllenberg, M., Heimans, H.J.A.M., and Thieme, H.R., 1987, "Perturbation theory for dual semigroups I. The sun-reflexive case," Mathematische Annalen277, 709-725.
6.
Clement, P., Diekmann, O., Gyllenberg, M., Heimans, H.J.A. M., and Thieme, H.R., 1988, "Perturbation theory for dual semigroups II. Time-dependent perturbations in the sun-reflexive case," Proceedings of the Royal Society of Edinburgh Section A109A, 145-172.
7.
Davies, M.A., Pratt, J.R., Dutterer, B., and Burns, T.J., 2002, "Stability prediction for low radial immersion milling ," Journal of Manufacturing Science and Engineering125(1), 217-225.
8.
Diekmann, O., van Gils, S.A., Verduyn Lunel, S.M., and Walther, H.O., 1995, Delay Equations, Springer, New York.
9.
Guckenheimer, P. and Holmes, J., 1983, Nonlinear Oscillations, Dynamical Systems, and Bifurcations of Vector Fields, Springer, New-York .
10.
Hale, J.K. and Verduyn Lunel, S.M., 1993, Introduction to Functional Differential Equations, Springer, New-York.
11.
Hille, E. and Phillips, R.S., 1957, Functional Analysis and Semigroups, American Mathematical Society, Providence, RI.
12.
Insperger, T. and Stépán, G., 2004, "Vibration frequencies in high-speed milling process or a positive answer to Davies, Pratt, Dutterer and Burns," Journal of Manufacturing Science and Engineering126(3), 481-487.
13.
Kaashoek, M.A. and Lunel, S.M.V., 1992, "Characteristic matrices and spectral properties of evolutionary systems," Transactions of the American Mathematical Society334, 479-517.
14.
Kalmár-Nagy, T., Stépán, G., and Moon, F.C., 2001, "Subcritical Hopf bifurcation in the delay equation model for machine tool vibrations," Nonlinear Dynamics26, 121-142.
15.
Mann, B.P., Insperger, T., Bayly, P.V., and Stépán, G., 2003, "Stability of up-milling and down-milling, part 2: experimental verification," International Journal of Machine Tool and Manufacture43, 35-40.
16.
Minis, I. and Yanushewsky, R., 1993, "A new theoretical approach for the prediction of machine tool chatter in milling," ASME Journal of Engineering for Industry115, 1-8.
17.
Pazy, A., 1983, Semigroups of Linear Operators and Applications to Partial Differential Equations, Springer, New York.
18.
Shi, H.M. and Tobias, S.A., 1984, "Theory of finite amplitude machine tool instability," International Journal of Machine Tool Design and Research24, 45-69.
Stépán, G. and Kalmár-Nagy, T., 1997, "Nonlinear regenerative machine tool vibrations," in Proceedings of the 1997 ASME Design Engineering Technical Conferences, Sacramento, CA, paper DETC97/VIB-4021.
21.
Szalai, R. and Stépán, G., 2003, "Stability boundaries of high-speed milling corresponding to period doubling are essentially closed curves," in Proceedings of IMECE2003 ASME International Mechanical Engineering Congress and R&D Expo, paper IMECE2003-42122 (CD-ROM) Washington, DC.
22.
Szalai, R., Stépán, G., and Hogan, S.J., 2004, "Global dynamics of low immersion high-speed milling," Chaos14(4), 1069-1077.
23.
Szalai, R., Stépán, G., and Hogan, S.J., 2006, "Continuation of bifurcations in periodic delay differential equations using characteristic matrices," SIAM Journal on Scientific Computing28(4), 1301-1317.
24.
Tlusty, J., 2000, Manufacturing Process and Equipment, Prentice-Hall, Englewood Cliffs, New Jersey.
25.
Tobias, S.A., 1961, Schwingungen an Werkzeugmaschinen, Carl Hanser Verlag, München.
