Periodic Struts for Gearbox Support System

Abstract

Passive periodic structures exhibit unique dynamic characteristics that make them act as mechanical filters for wave propagation. As a result, waves can propagate along the periodic structures only within specific frequency bands called “pass bands” and wave propagation is completely blocked within other frequency bands called “stop bands”. In this paper, the emphasis is placed on developing a new class of these periodic structures called passive periodic struts, which can be used to support gearbox systems on the airframes of helicopters. When designed properly, the passive periodic strut can stop the propagation of vibration from the gearbox to the airframe within critical frequency bands, consequently minimizing the effects of transmission of undesirable vibration and sound radiation to the helicopter cabin. The theory governing the operation of this class of passive periodic struts is introduced and their filtering characteristics are demonstrated experimentally as a function of their design parameters. The presented concept of the passive periodic strut can be easily used in many applications to control the wave propagation and the force transmission in both the spectral and spatial domains in an attempt to stop/confine the propagation of undesirable disturbances.

Keywords

Passive periodic struts helicopter gearbox stop bands vibration isolation

Get full access to this article

View all access options for this article.

References

Baz, A. , 2001, “Active control of periodic structures” , ASME Journal of Vibration and Acoustics 123, 472–479 .

Brennan, M. , Elliott, S. , and Pinnington, R. , 1992, “Active control of vibrations transmitted through struts” , in Proceedings of the 1st International Conference on Motion and Vibration Control, Yokohama, Japan, Japan Society of Mechanical Engineers, pp. 605–609 .

Brillouin, L. , 1946, Wave Propagation in Periodic Structures, 2nd edition, Dover, New York .

Doyle, J. , 1997, Wave Propagation in Structures, 2nd edition, Springer-Verlag, New York .

Elliott, S. , Sutton, T. , Brennan, M. , and Pinnington, R. , 1994, “Vibration reduction by active wave control in a strut” , in Proceedings of the Symposium of International Union of Theoretical and Applied Mechanics, Bath, UK, September 5–8, pp. 1–7 .

Gembler, W. , Schweitzer, H. , Maier, R. , and Pucher, M. , 1998, “Helicopter interior noise reduction by active gearbox struts” , in Proceedings of the 54th Annual Forum of the American Helicopter Society, Washington, DC, pp. 37–47 .

Gembler, W. , Schweitzer, H. , Maier, R. , Pucher, M. , Janker, P. , and Hermle, F. , 1999, “Thesmartstruts–the solution for helicopter interior noise problems” , in Proceedings of the 25th European Rotorcraft Forum, Rome, Italy, September 14–16, pp. B1(1)–B1(8) .

Kawaguchi, H. , Bandoh, H. , and Niwa, Y. , 1996, “The test result of AVR (active vibration reduction) system” , in Proceedings of the American Helicopter Society 52nd Annual Forum, Washington, DC, pp. 123–136 .

King, S. , 1988, “The minimization of helicopter vibration through blade design and active control” , Aeronautical Journal 92, 247–263 .

10.

Kretz, M. and Larche, M. , 1980, Future of Helicopter Rotor Control, Pergamon, New York , Vol. 4, pp. 13–22.

11.

Loewy, R. G. , 1984, “Helicopter vibrations: a technological perspective” , in Proceedings of the 40th Annual Forum of the American Helicopter Society, Arlington, VA, pp. 894–905 .

12.

Millott, A. and Welsh, W. , 1999, “Helicopter active noise and vibration reduction” , in Proceedings of the 25th European Rotorcraft Forum, Rome, Italy, September 14–16, pp. G23(1)–G23(13) .

13.

Millott, A. , Welsh, W. , Yoerkie, C. , MacMartin, D. , and Davis, D. , 1998, “Flight test of active gear-mesh noise control on the S-76 aircraft” , in Proceedings of the 54th Annual Forum of the American Helicopter Society, Washington, DC, pp. 241–249 .

14.

Pelinescu, I. and Balachandran, B. , 1998, “Active control of vibration transmission through struts” , Smart Structures and Materials, Smart Structures and Integrated Systems, Proceedings of SPIE 3329, 596–607 .

15.

Staple, A. and Wells, D. , 1990, “The development and testing of an active control of structural response system for the EH101 helicopter” , in Proceedings of the 16th European Rotorcraft Forum, Glasgow, UK, III.6.1.1.

16.

Sutton, T. , Elliott, S. , Brennan, M. , Heron, K. , and Jessop, D. , 1997, “Active isolation of multiple structural waves on a helicopter gearbox support strut” , Journal of Sound and Vibration 205, 81–101 .