An active control strategy for controlling impact response in composite plates is proposed. A linear quadratic regulator (LQR) controller is designed based on a reduced-order model that captures the essential dynamics of the system. Simulations results show that the proposed controller reduces the energy transferred to the structure. Thus, the possibility of impact-induced structural damage is reduced for a wide range of impact conditions. Implementation issues are discussed and some practical limitations are identified.
An, C. and Hollerbach, J., 1987, "Dynamic stability issues in force control of manipulators ," in Proceedings of the IEEE Conference on Robotics and Automation, March 31-April 3, Raleigh, NC, pp. 890-896.
2.
Birman, V., Chandrashekhara, K., and Sukhendu, S., 1997, "Global strength of hybrid shape memory composite plates subjected to low-velocity impact," Journal of Reinforced Plastics and Composites16(9), 791-809.
3.
Boghiu, D. and Marghitu, D.B., 1998, "The control of an impacting flexible link using fuzzy logic strategy," Journal of Vibration and Control4, 325-341.
4.
Bryson, A.E. and Ho, Y.C., 1975, Applied Optimal Control, John Wiley , New York.
5.
Byme, G.D. and Hindmarsh, A.C., 1975, "A polyalgorithm for the numerical solution of ordinary differential equations," ACM Transactions on Mathematical Software1, 71-76.
6.
Chandrashekhara, K., Chukwujekwu O.A., and Jiang, Y.P., 1998, "Estimation of contact force on composite plates using impact-induced strain and neural networks," Composites Part B29B, 363-370.
7.
Christoforou, A.P. and Swanson, S.R., 1991, "Analysis of impact response in composite plates ," International Journal of Solids and Structures27, 161-170.
8.
Christoforou, A.P. and Yigit, A.S., 1995, "Analysis of transient response of a composite beam subject to elasto-plastic impact," Composites Engineering5, 459-470.
9.
Christoforou, A.P. and Yigit, A.S., 1998, "Effect of flexibility on low velocity impact response ,"Journal of Sound and Vibration217, 563-578.
10.
Clark, R.L., Sounders, W.R., and Gibbs, G.P., 1998, Adaptive Structures, John Wiley , New York.
11.
Davies, G.A.O., Zhang, X., Zhou, G., and Watson, S., 1994, "Numerical modelling of impact damage," Composites25(5), 342-350.
12.
Gentilli, F. and Tomambe, A., 1997, "Adaptive regulation of impact induced forces for three degree of freedom collisions: A backstepping approach," in Proceedings of American Control Conference, Albuquerque, NM, June, pp. 751-755.
13.
Goldsmith, W., 1960, Impact, Edward Amold, London.
14.
Jackson, W.C. and Poe, C.C., Jr., 1993, "The use of impact force as a scale parameter for the impact response of composite laminates," Journal of Composites Technology and Research15, 282-289.
15.
Johnson, K.L., 1985, Contact Mechanics, Cambridge University Press, New York.
16.
Khatib, O. and Burdick, J., 1986, "Motion and force control for robot manipulators ," in Proceedings of IEEE Conference on Robotics and Automation , April 7-10, San Francisco, CA, pp. 1381-1386.
17.
Khulief, Y.A. and Shabana, A.A., 1986, "Dynamic analysis of constrained system of rigid and flexible bodies with intermittent motion," ASME Journal of Mechanisms, Transmissions, and Automation in Design108, 38-45.
18.
Lee, E., Laparo, K.A., and Quinn, R.D., 1996, "A nonlinear bang-bang impact force control," inProceedings of the 35th Conference on Decision and Control , Kobe Japan, December, pp. 1967-1973.
19.
Librescu, L. and Na, S., 1998, "Dynamic response control of thin-walled beams to blast pulses using structural tailoring and piezoelectric actuation," ASME Journal of Applied Mechanics65, 497-504.
20.
Marghitu, D. and Hurmuzlu, Y., 1995, "Three dimensional rigid-body collisions with multiple contact points," ASME Journal of Applied Mechanics62, 725-732.
21.
Narendra, K.S. and Annaswamy, A.M., 1989, Stable Adaptive Systems, Prentice Hall , Englewood Cliffs, NJ.
22.
Parker, J.K. and Paul, F.W., 1987, "Controlling impact forces in pneumatic robot hand designs ," Journal of Dynamic Systems, Measurement and Control109, 328-334.
23.
Sierakowski, R.L. and Newaz, G.M., 1995, Damage Tolerance in Advanced Composites, Technomic, Lancaster, PA.
24.
Sun, C.T. and Chen, J.K., 1985, "On the impact of initially stressed composite laminates ," Journal of Composite Materials19, 490-504.
25.
Tomambe, A., 1996, "Global regulation of a planar robot arm striking a surface ," IEEE Transactions on Automatic Control41(10), 1517- I 521.
26.
Tzou, H.S., 1998, "Multifield transducers, devices, mechatronic systems, and structronic systems with smart materials," Shock and Vibration Digest30, 282-294.
27.
Volpe, R. and Khosla, P., 1993, "A theoretical and experimental investigation of impact control for manipulators," International Journal of Robotics Research12(4), 351-365.
28.
Weng, S.W. and Young K., 1996, "An impact control scheme inspired by human reflex ," Journal of Robotic Systems13( 12), 837-855.
29.
Yigit, A.S. and Christoforou, A.P. , 1995, "Impact dynamics of composite beams," Composite Structures32, 187-195.
30.
Yigit, A.S., Ulsoy, G.A., and Scott, R.A., 1990, "Dynamics of a radially rotating beam with impact, Part 1: Theoretical and computational model, Part 2: Experimental and simulation results," ASME Journal of Vibration and Acoustics112, 65-77.
31.
Youcef-Toumi, K. and Gutz, D., 1989, "Impact and force control," in Proceedings of IEEE Conference on Robotics and Automation, May, Scottsdale, AZ, pp. 410-416.
32.
Zukas, J.A., Nicholas, T., Swift, H.F., Greszcuzuk, L.B., and Curran, D.R., 1982,Impact Dynamics. John Wiley, New York.
