This study quantified the effect of compression load and duration on the deflection of five separate antifatigue flooring surfaces. Following standardized measurement of A Shore hardness, each sample underwent simulated single-leg stance indentation procedures that differed by compression load (45.3 kg, 90.7 kg, 136.1 kg) and duration (initial = 2.5 s, intermediate = 6.25 s, final = 12.5 s). Vertical deflection was compared across conditions, and the relationship between A Shore hardness and deflection was characterized. When compressed with 45.3 kg, deflection was not influenced by duration, but at 136 kg, deflection differed between durations by up to 15%. The relationship between A Shore hardness and deflection was characterized by a third-order polynomial function (R2 > 0.991).
AbamovichH. (2017). Stability and vibrations of thin-walled composite strucutres. Woodhead.
2.
BhanS.LevineI. C.LaingA. C. (2014). Energy absorption during impact on the proximal femur is affected by body mass index and flooring surface. Journal of Biomechanics, 47(10), 2391–2397. https://doi.org/10.1016/j.jbiomech.2014.04.026
3.
CarleyP.LachowskiS.MullinE. (2017). Floor mats and insoles: Workplace considerations for safe dynamic standing. Journal of Bones and Muscle Study, 1, 1–8. https://doi.org/10.29199/2637-7039/BOMS-101011
4.
CavanaghP. R.RodgersM. M.IiboshiA. (1987). Pressure distribution under symptom-free feet during barefoot standing. Foot & Ankle International, 7(5), 262–278. https://doi.org/10.1177/107110078700700502
5.
EbbenJ. M. (2003). Improved ergonomics for standing work. Occupational Health & Safety, 72, 72.
GlinkaM. N.CheemaK. P.RobinovitchS. N.LaingA. C. (2013). Quantification of the trade-off between force attenuation and balance impairment in the design of compliant safety floors. Journal of Applied Biomechanics, 29(5), 563–572. https://doi.org/10.1123/jab.29.5.563
8.
GlinkaM. N.KarakolisT.CallaghanJ. P.LaingA. C. (2013). Characterization of the protective capacity of flooring systems using force-deflection profiling. Medical Engineering & Physics, 35(1), 108–115. https://doi.org/10.1016/j.medengphy.2012.04.006
9.
GordonC. C.BlackwellC. L.BradmilerB.ParhamJ. L.BarrientosP.PaquetteS. P.CornerB. D.CarsonJ. M.VeneziaJ. C.RockwellB. M.MucherM.KristensenS. (2014). 2012 anthropometric survey of U.S. Army personnel: Methods and smmary statistics. NATICK/TR, 15, 7. https://apps.dtic.mil/dtic/tr/fulltext/u2/a611869.pdf
HamacherD.HamacherD.MüllerR.SchegaL.ZechA. (2019). The effect of a cognitive dual task on the control of minimum toe clearance while walking. Motor Control, 23(3), 344–353. https://doi.org/10.1123/mc.2018-0006
12.
ISO7619-1. (2010). Rubber, vulcanized or thermoplastic–determination of indentation hardness–Part 1: Durometer method (Shore hardness). https://www.iso.org/standard/50756.html
13.
KingP. M. (2002). A comparison of the effects of floor mats and shoe in-soles on standing fatigue. Applied Ergonomics, 33(5), 477–484. https://doi.org/10.1016/S0003-6870(02)00027-3
14.
LaingA. C.RobinovitchS. N. (2009). Low stiffness floors can attenuate fall-related femoral impact forces by up to 50% without substantially impairing balance in older women. Accident Analysis & Prevention, 41(3), 642–650. https://doi.org/10.1016/j.aap.2009.03.001
15.
MessingK.TissotF.StockS. (2008). Distal lower-extremity pain and work postures in the quebec population. American Journal of Public Health, 98(4), 705-713. https://doi.org/10.2105/AJPH.2006.099317
16.
MillsP. M.BarrettR. S.MorrisonS. (2008). Toe clearance variability during walking in young and elderly men. Gait & Posture, 28(1), 101–107. https://doi.org/10.1016/j.gaitpost.2007.10.006
17.
MoosabhoyM. A.GardS. A. (2006). Methodology for determining the sensitivity of swing leg toe clearance and leg length to swing leg joint angles during gait. Gait & Posture, 24(4), 493–501. https://doi.org/10.1016/j.gaitpost.2005.12.004
18.
QuiJ. H.JoyceK.BoyceM. C. (2003). Durometer hardness and the stress-strain behavior of elastomeric materials. Rubber Chemistry and Technology, 76(2), 419-435. https://doi.org/10.5254/1.3547752
19.
RedfernM. S.ChamR. (2000). The influence of flooring on standing comfort and fatigue. American Industrial Hygiene Association, 61(5), 700–708. https://doi.org/10.1080/15298660008984580
20.
RedfernM. S.MooreP. L.YarskyC. M. (1997). The influence of flooring on standing balance among older persons. Human Factors, 39(3), 445–455. https://doi.org/10.1518/001872097778827043
21.
RibeiroD. M.Santos BuenoG. A.GervásioF. M.de MenezesR. L. (2019). Foot-ground clearance characteristics in women: A comparison across different ages. 69, 121–125. https://doi.org/10.1016/j.gaitpost.2019.01.028
22.
SchulzB. W. (2011). Minimum tow clearance adaptationsto floor surface irregularity and gait speed. Journal of Biomechanics, 44(7), 1277–1284. https://doi.org/10.1016/j.jbiomech.2011.02.010
SittichokeC.BuasordJ.BoripuntakulS.SungkaratS. (2019). Effects of compliant flooring on dynamic balance and gait characteristics of community-dwelling older persons. Journal of Nutrition, Health & Aging, 23(7), 665–668. https://doi.org/10.1007/s12603-019-1211-0
25.
ZanderJ. E.KingP. M.EzenwaB. N. (2004). Influence of flooring conditions on lower leg volume following prolonged standing. International Journal of Industrial Ergonomics, 34(4), 279–288. https://doi.org/10.1016/j.ergon.2004.04.014
