Sage Journals: Discover world-class research

Abstract

A crucial issue in concurrent engineering (CE) is the information communication between the heterogeneous computer based systems. STEP is an evolving international standard for the representation and exchange of product data in all phases of the product's life- cycle, that offers an efficient mechanism of information communication for CE. Application Protocols (APs) of STEP support the exchange of product data among different application domains such as CAD, CAE, CAPP, CAM. Therefore, in CE, there is a strong demand for in teroperability between different APs through standardized exchange and shanng of data. This article introduces a systematic approach to implementing the interoperation between APs, which addresses the issue at three levels: Application Interpreted Constructs (AICs), Unit of Functionality (UoFs) and Concept. This paper describes the methodology and illustrates an example of interoperation between AP 203 and AP209 of STEP to demonstrate how to implement the interoperation at the above three levels.

Keywords

STEP application protocol product data model data exchange concurrent engineering.

Get full access to this article

View all access options for this article.

References

Averill, R. et. al., "The Application of STEP to the Design and Analysis of Composite Parts," Dept. of Material Science and Mechanics, Michigan State University, 1995

Burkett, W. and Yang, Y. , "The STEP Integration Information Architecture," Engineering with Computers, vol. 11 no. 3, 1995

Chan, K. and Gu, P. , "A STEP-Based Generic Product Model for Concurrent Engineering," Concurrent Engineering: Methodology and Application, Elsevier Science Publishers B.V., 1995, pp. 249-275

Li, W. , Zhang, C. and Wang, B. , "Automated Tolerance Analysis and Synthesis Using a STEP Application Protocol Method," Journal of Systems Engineering, No. 5, 1995, pp. 16-26

Loffredo, D. , ST-Developer ROSE Library Reference Manual, STEP Tools Inc., Rensselaer Technology Park, Troy, New York 12180

Nist , Industrial Automation Systems-Exchange of Product Model Data—Part 21: Implementation Method: Clear Text Encoding ofthe Exchange Structure, National Institute of Standards and Technology, Gaithersburg, MD, 1994

Nist , Industrial Automation Systems—Exchange of Product Model Data—Part 22: Implementation Method: STEP Data Access Interface, National Institute of Standards and Technology , Gaithersburg, MD, 1995

Nist , Industrial Automation Systems—Exchange of Product Model Data—Part 23 Implementation Method C++ Programming Language Binding to the Standard Data Access Interface Specification, National Institute of Standards and Technology, Gaithersburg, MD, 1995

Nist , Industrial Automation Systems—Exchange of Product Model Data—Part 203 Application Protocol Configuration Controlled Design, National Institute of Standards and Technology , Gaithersburg, MD, 1994

10.

Nist , Industrial Automation Systems-Exchange of Product Model Data-Part 209: Application Protocol Composite and Metallic Structural Analysis and Related Design, National Institute of Standards and Technology, Gaithersburg, MD, 1996

11.

Nist , Industrial Automation Systems—Exchange of Product Model Data—Part 213: Application Protocol: Numerical Control (NC) Process Plans for Machined Parts, National Institute of Standards and Technology, Gaithersburg, MD, 1994

12.

Nist , Industrial Automation Systems—Exchange of Product Model Data—Part 224: Application Protocol Mechanical Product Definition for Process Planning Using Machining Features , National Institute of Standards and Technology, Gaithersburg, MD, 1994

13.

Qiao, L. , Zhang, C. , Liu, T. Wang, B. and Fischer, G. , "A PDES/STEP Based Product Data Preparation Procedure for Computer-Aided Process Planning," Computers in Industry, No. 21, 1993, pp. 11-22

14.

Schenck, D. and Wilson, P. , Information Modeling the EXPRESS Way, Oxford University Press, New York, 1994

15.

Shah, J. and Mathew, A. , "An Experiment in Feature Data Exchange using PDES," Proceedings of ASME Engineering Data Management Conference, pp. 67-74, Boston, August 1990

16.

Shah, J. and Mantyla, M. , Parametric and Feature-Based CAD/CAM, John Wiley & Sons, Inc., 1995

17.

Urban, S. , Shah, J. , Liu, H. and Rogers, M. , "The Shared Design Manager: Interoperability in Engineering Design ," Integrated Computer-Aided Engineering, 3(3) pp. 158-177, 1996

18.

Wen, J. and Hardwick, M. et. al., EXPRESS-X Reference Manual, Laboratory for Industrial Information Infrastructure, Rensselaer Polytechnic Institute, Troy, NY, May 1996

19.

Wong, A. and Sriram, D. , "SHARED: An Information Model for Cooperative Product Development," Research in Engineering Design, Vol. 5, No. 1, 1993, pp. 21-39

20.

Yang, Y. , "STEP Application Protocol Implementation," Product Data Integration Technologies, Inc., Long Beach, CA 90806, USA, 1995

Interoperation of STEP Application Protocols for Product Data Management

Abstract

Keywords

Get full access to this article

References