Influence of Al-dispersion and double layering on the microwave absorption behaviour of B 4 C

Abstract

Boron carbide (B₄C) is recognized for its low density, and excellent thermal stability, making it a strong candidate for ceramic-based microwave-absorbing materials. The present study focuses on the influence of Al-dispersion on electromagnetic attenuation behaviour of B₄C. The Al/B₄C composites were synthesized via high-energy mechanical ball milling with Al dispersion from 2 to 10 wt.%. Phase constitution and magnetic response were examined using X-ray diffraction and vibrating sample magnetometry, confirming phase stability of B₄C and the non-magnetic nature of the composites. Microstructural analysis using Field-emission scanning electron microscopy coupled with energy-dispersive spectroscopy mapping demonstrated homogeneous Al dispersion throughout the B₄C matrix promoting the formation of abundant heterogeneous interfaces. Dielectric properties and reflection loss were evaluated using a vector network analyzer over the 2–18 GHz range. Among the single-layer absorbers, sample BA1 (2 wt.% Al) exhibited the minimum RL of −42.75 dB at a matching thickness of 1.1 mm, with an effective absorption bandwidth of 2.19 GHz (RL < −10 dB). Sample BA4 (8 wt.% Al) showed the maximum effective absorption bandwidth (RL < −10 dB) of 2.63 GHz, indicating that increasing Al content improves bandwidth via enhanced conductive loss and interfacial polarization. To further broaden absorption performance, a double-layer absorber was designed, and layer sequences and thicknesses were optimized using a genetic algorithm (GA). The optimal configuration, BA3 as the front layer and BA1 as the backing layer, each with a thickness of 1.0 mm, achieved a substantially enhanced bandwidth of 5.7 GHz while maintaining >99% absorption efficiency across the operating band. The novelty of this work lies in demonstrating that controlled Al dispersion in B₄C, combined with GA-assisted double-layer design, enables thin and broadband microwave absorption without magnetic fillers.

Keywords

Microwave absorption boron carbide reflection loss multiple scattering conduction losses

Get full access to this article

View all access options for this article.

References

Chen

Yin

Fan

, et al. (2015) Mechanical and electromagnetic shielding properties of carbon fiber reinforced silicon carbide matrix composites. Carbon 95: 10–19. https://doi.org/10.1016/j.carbon.2015.08.011

Ding

Bai

Xiao

, et al. (2021) Molten-salt-assisted combustion synthesis of B₄C powders: synthesis mechanism and dielectric and electromagnetic wave absorbing properties. Ceramics International 47(13): 18708–18719. https://doi.org/10.1016/j.ceramint.2021.03.204

Dong

Gao

, et al. (2024) Design and performance of 3D-Printed ABS@rGO/CF/CeO₂ composites for microwave absorption and mechanical strength. Chemical Engineering Journal 499(October): 156696. https://doi.org/10.1016/j.cej.2024.156696

Dong

Gao

, et al. (2025) Enhancing microwave absorption of bio-inspired structure through 3D printed concentric infill pattern. Composites Part B: Engineering 289: 111924. https://doi.org/10.1016/j.compositesb.2024.111924

Duan

Zhu

Dong

, et al. (2019) Enhanced mechanical and microwave absorption properties of SiCf/SiC composite using aluminum powder as active filler. Journal of Alloys and Compounds 790: 58–69. https://doi.org/10.1016/j.jallcom.2019.03.171

Fathi

Ismail

Syahidah Azis

, et al. (2022) A review on electromagnetic microwave absorption properties: their materials and performance. Journal of Materials Research and Technology 20: 2188–2220. https://doi.org/10.1016/j.jmrt.2022.07.140

Gupta

Kumar

Dubey

, et al. (2024) Development of metamaterial using waste materials for microwave absorption. Brazilian Journal of Physics 54: 200. https://doi.org/10.1007/s13538-024-01571-2

Gupta

Dubey

Kumar

(2025) Improving microwave absorption bandwidth of nickel-dispersed boron carbide by double-layering using genetic algorithm. Ceramics International 51: 27475–27484. https://doi.org/10.1016/j.ceramint.2025.03.421

Kuang

Jiang

Ran

, et al. (2016) Conductivity-dependent dielectric properties and microwave absorption of Al-doped SiC whiskers. Journal of Alloys and Compounds 687: 227–231. https://doi.org/10.1016/j.jallcom.2016.06.168

10.

Kumar

Agarwala

Singh

(2012) Effect of Mg substitution on microwave absorption of BaFe₁₂O₁₉. Advanced Materials Research 585(3): 62–66. https://doi.org/10.4028/www.scientific.net/AMR.585.62

11.

Kumar

Agarwala

Singh

(2013) Microwave absorbing behavior of metal dispersed TiO₂ nanocomposites. Advanced Powder Technology 25: 1–7. https://doi.org/10.1016/j.apt.2013.07.006

12.

Kumar

Agarwala

Singh

(2014) Effect of milling on dielectric and microwave absorption properties of SiC based composites. Ceramics International 40: 1797–1806. https://doi.org/10.1016/j.ceramint.2013.07.080

13.

Yang

Zhang

, et al. (2019) Direct large-scale fabrication of C encapsulated B₄C nanoparticles with tunable dielectric properties as excellent microwave absorbers. Carbon 148: 504–511. https://doi.org/10.1016/j.carbon.2019.04.020

14.

Micheli

Pastore

Apollo

, et al. (2011) Broadband electromagnetic absorbers using carbon nanostructure-based composites. IEEE Transactions on Microwave Theory and Techniques 59(10): 2633–2646. https://doi.org/10.1109/TMTT.2011.2160198

15.

Michielssen

Sajer

Ranjithan

, et al. (1993) Design of lightweight, broad-band microwave. IEEE Transactions on Microwave Theory and Techniques 41: 1024–103141. https://doi.org/10.1109/22.238519

16.

Oikonomou

Giannakopoulou

Litsardakis

(2007) Design, fabrication and characterization of hexagonal ferrite multi-layer microwave absorber. Journal of Magnetism and Magnetic Materials 316: 827–830. https://doi.org/10.1016/j.jmmm.2007.03.114

17.

Padhy

Debata

, et al. (2018) Design, characterization, and optimization of a multilayer U-type hexaferrite-based broadband microwave absorber. IEEE Transactions on Electromagnetic Compatibilty 60: 1–9. https://doi.org/10.1109/TEMC.2018.2805364

18.

Singh

Kumar

(2019) Selection of core-shell material-based electromagnetic wave absorbers in 2–18 GHz using TOPSIS and VIKOR ranking methods. Defence Science Journal 69(5): 431–436. https://doi.org/10.14429/dsj.69.14946

19.

Singh

Sinha

Zunke

, et al. (2018) Double layer microwave absorber based on Cu dispersed SiC composites. Advanced Powder Technology 29(9): 2019–2026. https://doi.org/10.1016/j.apt.2018.05.008

20.

Singh

Shukla

Kumar

, et al. (2018) Influence of Zn dispersion in SiC on electromagnetic wave absorption characteristics. Journal of Alloys and Compounds 738: 448–460. https://doi.org/10.1016/j.jallcom.2017.12.190

21.

Singh

Kumar

Singh

(2020) Enhanced microwave absorption performance of SWCNT/SiC composites. Journal of Electronic Materials 49(12): 7279–7291. https://doi.org/10.1007/s11664-020-08460-9

22.

Tan

Luo

Zhou

, et al. (2018) Boron carbide composites with highly aligned graphene nanoplatelets: light-weight and efficient electromagnetic interference shielding materials at high temperatures. RSC Advances 8(69): 39314–39320. https://doi.org/10.1039/c8ra07351a

23.

Wang

Cheng

Zhang

, et al. (2017) Flexible SiC/Si3N4 composite nanofibers with in situ embedded graphite for highly efficient electromagnetic wave absorption. ACS Applied Materials and Interfaces 9(34): 28844–28858. https://doi.org/10.1021/acsami.7b05382

24.

Wang

Zhao

, et al. (2018) Cerium oxide immobilized reduced graphene oxide hybrids with excellent microwave absorbing performance. Physical Chemistry Chemical Physics 20(20): 14155–14165. https://doi.org/10.1039/c8cp00160j

25.

Wang

Liu

Cheng

, et al. (2022) Structural design and broadband radar absorbing performance of multi - layer patch using carbon black. Advanced Composites and Hybrid Material 5: 3137–3145. https://doi.org/10.1007/s42114-021-00399-7

26.

Liu

Zhou

, et al. (2020) Microwave absorbing properties of FeB/B₄C nanowire composite. Ceramics International 46(3): 4020–4023. https://doi.org/10.1016/j.ceramint.2019.10.052

27.

Bie

, et al. (2016) Broad bandwidth of thin composite radar absorbing structures embedded with frequency selective surfaces. Composites Part A: Applied Science and Manufacturing 80: 111–117. https://doi.org/10.1016/j.compositesa.2015.10.019

28.

Yang

Luo

Zhou

, et al. (2017) Design of a thin and broadband microwave absorber using double layer frequency selective surface. Journal of Alloys and Compounds 699: 534–539. https://doi.org/10.1016/j.jallcom.2017.01.019

29.

Zhou

Yan

Huang

, et al. (2021) Dielectric and microwave absorption properties of FeSiAl/Al₂O₃ composites containing FeSiAl particles of different sizes. Ceramics International 47(6): 7831–7836. https://doi.org/10.1016/j.ceramint.2020.11.129