In this study, the microwave-absorption characteristics of multi-layered radar-absorbing structures (RASs) were investigated. Electrical-grade glass (e-glass)/epoxy composites containing modified multi-walled carbon nanotubes (MWCNTs) were fabricated. The poly aniline (PANI) coated MWCNTs was obtained by in-situ polymerisation of aniline in the presence of MWCNTs. The PANI-coated MWCNTs (PCNTs) were then used as reinforcements in the polymer matrix, and their morphologies, microstructures, thermal stabilities, and microwave-absorbing properties were investigated. The complex permittivity and permeability of the composites were measured and found to have increased with increasing filler concentration. Microwave absorbing properties were analysed via waveguide measurement. The three-layered RASs reinforced with PCNTs having a thickness of 4 mm exhibited a RL of –5 dB over the entire X-band and a reflection peak of –24.53 dB at 10.0 GHz. Hence, the epoxy/PCNTs composites are suitable for use in microwave-absorption applications.
IijimaS.Helical microtubules of graphitic carbon. Lett Nat. 1991; 354; doi: 10.1038/3540560.
2.
Koval'chukAA, ShchegolikhinAN, ShevchenkoVG, Synthesis and properties of polypropylene/multiwall carbon nanotube composites. Macromolecules. 2008; 41: 3149–56. doi: 10.1021/ma800297e.
3.
SaviP, MiscuglioM, GiorcelliM, Analysis of microwave absorbing properties of epoxy MWCNT composites. Prog Electromagn Res Lett. 2014; 44: 63–69. doi: 10.2528/pierl13102803.
4.
DengL, HanM.Microwave absorbing performances of multiwalled carbon nanotube composites with negative permeability. Appl Phys Lett. 2007; 91: 023119, doi: 10.1063/1.2755875.
5.
SpitalskyZ, MatejkaL, SloufM, Modification of carbon nanotubes and its effect on properties of carbon nanotube/EpoxyNanocomposites. Polym Compos. 2009; 30: 1378–87. doi: 10.1002/pc.20701.
NaiduMK, RamjiK, SanthosiBVSRN, Influence of NiFe alloy nanopowder on electromagnetic and microwave absorption properties of MWCNT/epoxy composite. Adv Polym Technol. 2016; 2016; DOI 10.1002/adv.21703.
8.
BhattacharyaP, SahooS, DasCK.Microwave absorption behaviour of MWCNT based nanocomposites in X-band region. Express Polym Lett. 2013; 7 ( 3 ): 212–223. doi: 10.3144/expresspolymlett.2013.20.
WangY, LiT, ZhaoL, Research progress on nanostructured radar absorbing materials. Energy Power Eng. 2011; 3: 580–584. doi: 10.4236/epe.2011.34072.
11.
RamjiPK, NaiduMK, SanthosiBVSRN. ( 2015 ). Simulation of multi layered Radar absorbing structure of epoxy based MWNTs for better microwave absorption. Proceedings of International Conference on Advances in Materials, Manufacturing and Applications (AMMA 2015), April 9–11, 2015.
12.
SinghBP, PrasantaVC, SainiP, Enhanced microwave shielding and mechanical properties of high loading MWCNT–epoxy composites. J Nanopart Res. 2013; 15: 1554, doi: 10.1007/s11051-013-1554-0.
JagtapSB, RatnaD.Preparation and characterization of rubbery epoxy/multiwall carbon nanotubes composites using aminoacid salt assisted dispersion technique. Express Polym Lett. 2013; 7 ( 4 ): 329–339. doi: 10.3144/expresspolymlett.2013.30.
15.
WangY.Microwave absorbing materials based on polyaniline composites: a review. Int J Mater Res. 2014; 105: 3–12.
16.
SongTH, ChoiWH, ShinJH, Analysis of microwave absorbing properties of epoxy MWCNT composites. Prog Electromagn Res Lett. 2019; 44: 63–69. doi.10.2528/PIERL1302803.
17.
CheBD, NguyenL-TT, NguyenBQ, Effects of carbon nanotube dispersion methods on the Radar absorbing properties of MWCNT/epoxy nanocomposites. Macromol Res. 2014; 22 ( 11 ): 1221–1228. doi: 10.1007/s13233-014-2169-8.
18.
CheBD, NguyenBQ, NguyenLTT, The impact of different multi-walled carbon nanotubes on the X-band microwave absorption of their epoxy nanocomposites. Chem Cent J. 2015; 9: 10 ), doi: 10.1186/s13065-015-0087-2.
19.
SanthosiBVSRN, RamjiK, RaoNM, Comparative study of polymer- based nanocomposites microwave absorption performance in X – band. Mater Res Express. 2019, doi: 10.1088/2053-1591/ab621e.
NaiduMK, RamjiK, SanthosiBVSRN, Enhanced microwave absorption of quartic layered epoxy-mwcnt composite for radar applications. Adv Compos Lett. 2017; 26: 133–141. doi: 10.1177/096369351702600405.
22.
HarithaT, RamjiK, SreeP, Complex permittivity, permeability and microwave absorbing properties of PANI coated MWCNTS/Manganese zinc ferrite nanocomposite. Mater Today: Proc. 2019; 18: 420–425. doi: 10.1016/J.Matpr.2019.06.320.
XieA, WuF, JiangW, Chiral induced synthesis of helical polypyrrole (PPy) nanostructures: a light-weight and high-performance material against electromagnetic pollution. J Mat Chem, 2017, IEEE Transactions on Magnetics. 2017;, doi: 10.1039/C6TC05057C.
25.
XieA, ZhangK, SunM, Facile growth of coaxial Ag@polypyrrole nanowires for highly tunable electromagnetic waves absorption. Mater Des. 2018; 154: 192–202. doi: 10.1016/j.matdes.2018.05.039.
26.
JiaoaY, LiJ, XieA, Confined polymerization strategy to construct polypyrrole/zeolitic imidazolate frameworks (PPy/ZIFs) nanocomposites for tunable electrical conductivity and excellent electromagnetic absorption. Compos Sci Technol. 2019; 174: 232–240. doi: 10.1016/j.compscitech.2019.03.003.
27.
SahooNG, RanaS, ChoJW, Polymer nanocomposites based on functionalized carbon nanotubes. Prog Polym Sci. 2010; 35: 837–867. doi: 10.1016/j.progpolymsci.2010.03.002.
28.
RenF, YuH, WangL, Current progress on the modification of carbon nanotubes and their application in electromagnetic wave absorption. RSC Adv, doi: 10.1039/C3RA46989A.
ThomassinJ-M, JeromeC, PardoenT, Polymer/carbon based composites as electromagnetic interference (EMI) shielding materials. Mater Sci Eng R. 2013; 74 ( 2013 ): 211–232. doi: 10.1016/j.mser.2013.06.001.
42.
XuY, XuW, BaoJ.A high performance electromagnetic interference shielding epoxy composite with multiple conductive networks in the matrix. J Polym Res. 2014; 21: 543, doi: 10.1007/s10965-014-0543-z.
43.
DoyleCD.Influence of conductive network structure on the EMI shielding and electrical percolation of carbon nanotube/polymer nanocomposites. Synth Met. 2015; 205: 78–84. doi: 10.1016/j.synthmet.2015.03.032.
44.
KuangT, ChangL, ChenF, Facile preparation of lightweight high-strength biodegradable polymer/multi-walled carbon nanotubes nanocomposite foams for electromagnetic interference shielding. Carbon N Y. 2016; 105; doi: 10.1016/j.carbon.2016.04.052.
45.
WangL, ZhangJ, ZhangQ.The effect of MWCNTs on the microwave electromagnetic properties of ferrite–MWCNTs composites. J Mater Sci: Mater Electron. 2015; 26: 1895–1899. doi: 10.1007/s10854-014-2626-3.
KumarA, KumarV, KumarM, Synthesis and characterization of hybrid PANI/MWCNT nanocomposites for EMI applications. Polymer Composites – 2017. 2017, doi: 10.1002/pc.24418.
48.
AliNN, Al-MarjehRAQB, AtassiY, Design of lightweight broadband microwave absorbers in the X-band based on (polyaniline/MnNiZn ferrite) nanocomposites. J Magn Magn Mater. 2018, doi: 10.1016/j.jmmm.2018.01.014.
49.
GovahiM, AfghahiSSS, JafarianM, Electromagnetic properties and absorption evaluation of processed carbonyl iron and MWCNT at PANI nanocomposites in the X-band. IEEE Trans Magn. 2019, doi: 10.1109/TMAG.2018.2890501.
GuptaS, TaiN-H.Carbon materials and their composites for electromagnetic interference shielding effectiveness in X-band. Carbon N Y. 2019; 152: 159–187. doi: 10.1016/j.carbon.2019.06.002.
52.
JelmyEJ, LakshmananM, KothurkarNK.Microwave absorbing behavior of glass fiber reinforced MWCNT-PANi/epoxy composite laminates. Mater Today: Proc. 2020; 26 ( 1 ): 36–43. doi: 10.1016/j.matpr.2019.04.203.
