Stress perturbations at free edges of CFRP-laminates may induce initial failure events at low load levels and accelerated damage growth, eventually reducing ulti mate strength in tensile-test situations. Lower values of measured strength must be ex pected from specimens with free edges than without.
Chamis, C.C.1984. "Simplified Composite Micromechanics Equations for Strength, Fracture Toughness, and Environmental Effects," SAMPE Q., 15(3):14-23.
2.
Chang, K.Y., S. Liu, and F.K. Chang1991. "Damage Tolerance of Laminated Composites Containing an Open Hole and Subjected to Tensile Loadings," Journal of Composite Materials, 25(1):274-301.
3.
Hashin, Z.1980. "Failure Criteria for Unidirectional Fiber Composites ;' Journal of Applied Mechanics, 47:329-334.
4.
Kress, G.1992. "Width Influence on Stiffness Measurements of Multidirectional CFRP Laminates Under Uniaxial Load," Composites Engineering , 2(2):83-90.
5.
O'Brien, T.K.1982. "Characterization of Delamination Onset and Growth in a Composite Laminate," in Damage in Composite Materials, ASTM STP 775, K. L. Reifsnider, ed., American Society of Testing and Materials, 140-167.
6.
O'Brien, T.K. , I.S. Raju, and D.P. Garber.1986. "Residual Thermal and Moisture Influences on the Strain Energy Release Rate Analysis of Edge Delamination ," Journal of Composite Technology and Research, 2(2):37-47.
7.
Pipes R.B. and N.J. Pagano.1970. "Interlaminar Stresses in Composite Laminates Under Uniform Axial Extension," Journal of Composite Materials, 4:538-548.
