Identification strategy influence of elastoplastic behavior law parameters on Gurson–Tvergaard–Needleman damage parameters: Application to DP980 steel

Abstract

This work adopts elastic–plastic/damage coupling in order to describe tensile behavior with validation on the deep-drawing test of a DP980 Dual Phase steel sheet. The damage model used is the Gurson–Tvergaard–Needleman (GTN model). The hardening laws used are those of Swift (non-saturating law), Voce (saturating law), Hockett-Sherby (saturating law) and the two combined laws Swift/Hockett-Sherby and Swift/Voce. An identifying method for elastic–plastic parameters and GTN damage model parameters is presented using the software modeFRONTIER. This method based on the inverse analysis is also proposed for the identification of weighting coefficient α of the Swift/Hockett-Sherby combined hardening law. Finally, a parametric study was carried out to show that the plastic modulus can be considered as another criterion for the choice of a hardening law. Dependence of the damage model parameters to the hardening law is clearly established. The different behavior laws are introduced via a VUHARD type subroutine in the calculation code Abaqus.