The adiabatic shear banding and its consequences are considered here as deterioration mechanisms incorporated in the dynamic plasticity modelling for high-strength metallic materials following earlier contributions of the present authors. A three-dimensional finite deformation model, starting from a specific scale postulate and devoted to cover a wide range of dissipative phenomena including adiabatic shear banding-related material instabilities, is further developed here. The developments concerned are based on recent experimental evidence and include explicitly post-localization void-sheet formation and growth in the wake of a band cluster. The model enlarged in this way allows for a more detailed description of a late pre-failure stage of shear-dominated deformation. Some model calibration and numerical implementation items are discussed.
Abu Al-RubRKVoyiadjisGZ (2006) A finite strain plastic-damage model for high velocity impacts using combined viscosity and gradient localization limiters, Part I: Theoretical formulation. International Journal of Damage Mechanics15–4: 293–334.
2.
BaiYL (1982) Thermo-plastic instability in simple shear. Journal of the Mechanics and Physics of Solids30(4): 195–207.
BatraRCLearMH (2005) Adiabatic shear banding in plane strain tensile deformations of 11 thermoelastoviscoplastic materials with finite thermal wave speed. International Journal of Plasticity21: 1521–1545.
5.
Berg CA (1970) Plastic dilatation and void interaction. In: Kanninen MF, Adler WF, Rosenfield AR, et al. (eds) Inelastic Behavior of Solids, McGraw-Hill, New York, pp. 171–210.
6.
Bonnet-LebouvierASMolinariALipinskiP (2002) Analysis of the dynamic propagation of adiabatic shear bands. International Journal of Solids and Structures39: 4249–4269.
7.
CliftonRJDuffyJHartleyKA (1984) On critical conditions for shear band formation at high strain rates. Scripta Metallurgica18: 443–448.
8.
CouqueH (2003) A hydrodynamic hat specimen to investigate pressure and strain rate dependence on adiabatic shear band formation. Journal de Physique IV110: 423–428.
9.
DolinskiMRittelDDorogoyA (2010) Modeling adiabatic shear failure from energy considerations. Journal of the Mechanics and Physics of Solids58(11): 1759–1775.
10.
Dragon A and Trumel H (2003) Damage under impact loading – Some modelling challenges. In: Fifth international symposium High Dynamic Pressures (HDP V), T.1, Saint-Malo, France, pp.267–283. CEA: Paris.
11.
GarikipatiKHughesTJR (2000) A variational multiscale approach to strain localization – Formulation for multidimensional problems. Computer Methods in Applied Mechanics and Engineering188: 39–60.
12.
GologanuMLeblondJBPerrinG (1997) Recent extension of Gurson’s model for porous ductile metals. In: SuquetP (ed.) Continuum Micromechanics. CISM Courses and Lectures no. 377. New York: Springer, pp.61–130.
13.
GursonAL (1977) Continuum theory of ductile rupture by void nucleation and growth: Part I – Yield criteria and flow rules for porous ductile media. Journal of Engineering Materials and Technology99: 2–15.
14.
KlepaczkoJR (1994) Some results and new experimental technique in studies of adiabatic shear bands. Archives of Mechanics46: 201–229.
15.
KulkarniMBelytschkoTBaylissA (1995) Stability and error analysis for time integrators applied to strain-softening materials. Computer Methods in Applied Mechanics and Engineering124: 335–363.
16.
LodygowskiTPerzynaP (1997) Localized fracture in inelastic polycrystalline solids under dynamic loading processes. International Journal of Damage Mechanics6: 364–407.
17.
LongèrePDragonA (2007) Adiabatic heat evaluation for dynamic plastic localization. Journal of Theoretical and Applied Mechanics45(2): 203–223.
18.
LongèrePDragonA (2010) Adiabatic shear: Pre- and post-critical dynamic plasticity modelling and study of impact penetration. Heat generation in this context. In: BritoA (ed.) Dynamic Modelling, Croatia: Intech, pp. 233–262.
19.
LongèrePDragonA (2015) Dynamic vs. quasi-static shear failure of high strength metallic alloys: Experimental issues. Mechanics of Materials80: 203–218.
20.
LongèrePDragonADeprinceX (2009) Numerical study of impact penetration shearing employing finite strain viscoplasticity model incorporating adiabatic shear banding. Journal of Engineering Materials and Technology131: 011105.1–011105.14.
21.
LongèrePDragonATrumelH (2003) Modelling adiabatic shear banding via damage mechanics approach. Archives of Mechanics55: 3–38.
22.
LongèrePDragonATrumelH (2005) Adiabatic shear banding induced degradation in a thermo-elastic/viscoplastic material under dynamic loading. International Journal of Impact Engineering32: 285–320.
23.
MarchandADuffyJ (1988) An experimental study of the formation process of adiabatic shear bands in a structural steel. Journal of the Mechanics and Physics of Solids36(3): 251–283.
24.
MeyerLWManwaringS (1986) Critical adiabatic shear strength of low alloyed steel under compressive loading. In: MurrLEStaudhammerKPMeyersMA (eds) Metallurgical Applications of Shock-Wave and High-Strain-Rate Phenomena, New York: Marcel Dekker Inc., pp. 657–674.
25.
MeyersMASubhashGKadBK (1994) Evolution of microstructure and shear-band formation in a-hcp titanium. Mechanics of Materials17: 175–193.
26.
MolinariA (1985) Instabilité thermoviscoplastique en cisaillement simple. Journal de Mécanique Théorique et Appliquée4: 659–684.
27.
MolinariA (1997) Collective behavior and spacing of adiabatic shear bands. Journal of the Mechanics and Physics of Solids45: 1551–1575.
28.
MorgeneyerTFTaillandier-ThomasTHelfenL (2014) In situ 3-D observation of early strain localization during failure of thin Al alloy (2198) sheet. Acta Materialia69: 78–91.
29.
OliverJHuespeAEPulidoMDG (2002) From continuous mechanics to fracture mechanics: The strong discontinuity approach. Engineering Fracture Mechanics69(2): 113–136.
30.
PecherskiRB (1998) Macroscopic effects of micro-shear banding in plasticity of metals. Acta Mechanica131: 203–224.
31.
PerzynaP (1984) Stability of flow processes for dissipative solids with internal imperfections. Journal of Applied Mathematics and Physics35: 848–867.
32.
PerzynaP (1990) Influence of anisotropic effects on the micro-damage process in dissipative solids. In: BoehlerJP (ed.) Yielding, Damage, and Failure of Anisotropic Solids, London: Mechanical Engineering, pp. 483–507.
33.
RittelD (2010) Ch.2 Dynamic shear failure of materials. In: ShuklaARavichandranGRajapakseYDS (eds) Dynamic Failure of Materials and Structures, New York: Springer, pp. 29–61.
34.
RittelDLeeSRavichandranG (2002) A shear-compression specimen for large strain testing. Experimental Mechanics42: 58–64.
35.
RousselierG (1987) Ductile fracture models and their potential in local approach of fracture. Nuclear Engineering and Design105: 97–111.
36.
RouxELongèrePCherrierO (2015) Analysis of ASB assisted failure in a high strength steel under high loading rate. Materials & Design75: 149–159.
37.
SidoroffFDoguiA (2001) Some issues about anisotropic elastic-plastic models at finite strain. International Journal of Solids and Structures38: 9569–9578.
38.
SuffisALubrechtAACombescureA (2003) A damage model with delay effect. Analytical and numerical studies of the evolution of the characteristic damage length. International Journal of Solids and Structures40: 3463–3476.
39.
TengXWierzbickiTCouqueH (2007) On the transition from adiabatic shear banding to fracture. Mechanics of Materials39: 107–125.
40.
TvergaardVNeedlemanA (1984) Analysis of the cup-cone fracture in a round tensile bar. Acta Metallurgica32(1): 157–169.
41.
VoyiadjisGZAbu Al-RubRK (2006) A finite strain plastic-damage model for high velocity impacts using combined viscosity and gradient localization limiters: Part II – Numerical aspects and simulations. International Journal of Damage Mechanics15: 335–373.
42.
VoyiadjisGZAbu Al-RubRKPalazottoAN (2003) Non-local coupling of viscoplasticity and anisotropic viscodamage for impact problems using the gradient theory. Archives of Mechanics55: 39–89.
43.
WoodwardRL (1990) Material failure at high strain rates. In: ZukasJA (ed.) High Velocity Impact Dynamics, New York: Wiley, pp. 65–125.
44.
ZenerCHollomonJH (1944) Effect of strain rate upon plastic flow of steel. Journal of Applied Physics15: 22–32.
45.
ZhouMRavichandranGRosakisAJ (1996) Dynamically propagating shear bands in impact-loaded prenotched plates-II. Numerical simulations. Journal of the Mechanics and Physics of Solids44(6): 1007–1032.
