We propose a two-scale method to find the effective behavior of a three-dimensional linear elastic medium containing a series of microcracks or microholes located on a surface. The obtained effective behavior is that of a homogeneous body with, in place of the actual microdefects, a surface across which the displacements and the stresses suffer jump discontinuities. The transmission conditions are in general of Ventcel's type. The coefficients entering in these jump conditions are obtained by solving six elastic problems posed on an infinite representative cell. The theoretical analysis is illustrated by a few examples.
AbdelmoulaR.CoutrisM.MarigoJ.-J. (1998). Comportement Asymptotique d'une Interphase Élastique Mince, Comptes Rendus de Academie des Sciences Paris Serie II b, 326: 237–242.
2.
AbdelmoulaR.MarigoJ.J. (2000). The effective behavior of a fiber bridged crack, Journal of the Mechanics and Physics of Solids, 48: 2419–2444.
3.
AndrieuxS.BambergerY.MarigoJ.-J. (1986). Un modèle de matériau microfissuré pour les bétons et les roches, Journal de Mécanique Théorique et Appliquée, 5: 471–513.
4.
BenvenisteY. (2006). A general interface model for a three-dimensional curved thin anisotropic interphase between two anisotropic media, Journal of the Mechanics and Physics of Solids, 54: 708–734.
5.
BenvenisteY.MilohT. (2001). Imperfect soft and stiff interfaces in two-dimensional elasticity, Mechanics of Materials, 33: 309–323.
BessoudA.-L.KrasuckiF.SerpilliM. (2008). Plate-like and shell-like inclusions with high rigidity, Comptes Rendus Mathematique, 346: 697–702.
8.
BilterystF.MarigoJ.-J. (2003). An energy based analysis of the pull-out problem, European Journal of Mechanics - A/Solids, 22: 55–69.
9.
CaillerieD. (1980). The effect of a thin inclusion of high rigidity in an elastic body, Mathematical Methods in the Applied Sciences, 2: 251–270.
10.
DevriesF.DumontetH.DuvautG.LenéF. (1989). Homogenization and damage for composite structures, International Journal of Numerical Methods in Engineering, 27: 285–298.
11.
DumontetH. (1990). Homogénéisation et Effets de Bords Dans les Matériaux Composites, Thèse de doctorat d'État., Université Pierre et Marie Curie, Paris.
12.
GeymonatG.KrasuckiF.LenciS. (1999). Mathematical analysis of a bonded joint with a soft thin adhesive, Mathematics and Mechanics of Solids, 4: 201–225.
13.
HuyH.P.Sanchez-PalenciaE. (1974). Phénomène de transmission à travers des couches minces de conductivité élevée, Journal on Mathematical Analysis and Applied, 47: 284–309.
14.
KlarbringA.MovchanA.B. (1998). Asymptotic modelling of adhesive joints, Mechanics of Materials, 28: 137–145.
15.
KrasuckiF.LenciS. (2000a). Analysis of interfaces of variable stiffness, International Journal of Solids and Structures, 37: 3619–3632.
16.
KrasuckiF.LenciS. (2000b). Yield design of bonded joints, European Journal of Mechanics - A/Solids, 19: 649–667.
17.
LemrabetK. (1987). Le problème de Ventcel pour le système de l'élasticité dans un domaine de ℝ3, Comptes Rendus de Academie des Sciences Paris Serie II b, 304: 151–154.
18.
LénéF. (1984). Contribution à L'etude Des Matériaux Composites et de Leur Endommagement, Thèse de doctorat d'État., Université Pierre et Marie Curie, Paris.
19.
LichtC.MichailleG. (1997). A modelling of elastic adhesive bonded joints, Advances in Mathematical Sciences and Application, 7: 711–740.
20.
MarigoJ.-J. (1985). Modelling of brittle and fatigue damage for elastic material by growth of microvoids, Engineering Fracture Mechanics, 21: 861–874.
21.
MichelJ.-C.MoulinecH.SuquetP. (1999). Effective properties of composite materials with periodic microstructure: a computational approach, Computer Methods in Applied Mechanics and Engineering, 172: 109–143.
22.
NguetsengG. (1985). Problèmes d'écrans perforés pour l'équation de Laplace, RAIRO Modélisation Mathématique et Analyse Numérique., 19: 33–63.
23.
NguetsengG.Sanchez-PalenciaE. (1986). Stress Concentration for Defects Distributed Near a Surface. In: LadevèzeP. (ed.), Local Effects in the Analysis of Structures., Elsevier, Amsterdam.
24.
RoseL.R.F. (1987). Crack reinforcement by distributed springs, Journal of the Mechanics and Physics of Solids, 35: 383–405.
25.
Sanchez-PalenciaE. (1980). Non-homogenous Media and Vibration Theory, Springer Verlag, Berlin, New York.
26.
Sanchez-PalenciaE. (1986). Elastic body with defects distributed near a surface, In: Homogenization Techniques for Composite Media, Springer Verlag, New York.
27.
SuquetP. (1987). Elements of homogenization for inelastic solid mechanics. In: Sanchez-PalenciaE.ZaouiA. (eds), Homogenization Techniques for Composite Media, Vol. 272, Lecture Notes in Physics. Springer Verlag, Berlin, pp. 193–278.
28.
VentcelA.D. (1959). On boundary conditions for multi-dimensional diffusion processes, Theory Probability and Applications, 4: 164–177.
