Phenomenological constitutive equations that describe inelastic behavior of advanced steels at elevated temperature are developed. To characterize hardening, recovery, and softening processes, a composite model with creep-hard and creep-soft constituents is applied. The volume fraction of the creep-hard constituent is assumed to decrease toward a saturation value. This approach reproduces well the primary creep as a result of stress redistribution between constituents and tertiary creep as a result of softening. To describe the whole tertiary creep stage, a damage variable in the sense of continuum damage mechanics is introduced. The material parameters and the response functions in the model are calibrated against experimental creep curves for X20CrMoV12-1 steel. For the verification, simulations of the inelastic response are performed and the results compared with experimental data including creep under stress change conditions and stress-strain response under constant strain rate. Furthermore, the lifetime predictions are analyzed and compared with the published creep rupture strength data. The results show that the consideration of both softening and damage processes is necessary to characterize the long-term strength in a wide stress range. Finally, the model is generalized to the multi-axial stress state.
Altenbach, H., Naumenko, K. and Zhilin, P. ( 2003). A Micro-polar Theory for Binary Media with Application to Phase-transitional Flow of Fiber Suspensions, Continuum Mechanics and Thermodynamics, 15: 539-570.
2.
Atkin, R.J. and Craine, R.E. ( 1976). Continuum Theories of Mixtures: Basic Theory and Historical Development, The Quarterly Journal of Mechanics and Applied Mathematics, 29: 209-244.
3.
Barkar, T. and Ågren, J. ( 2005). Creep Simulation of 9-12%Cr Steels using the Composite Model with Thermodynamically Calculated Input, Materials Science and Engineering, A395: 110-115.
4.
Besseling, J.F. ( 1958). A Theory of Elastic, Plastic and Creep Deformation of an Initially Isotropic Material Showing Anisotropic Strain Hardening, Creep Recovery and Secondary Creep, Transactions of ASME: Journal of Applied Mechanics, 25: 529-536.
5.
Besseling, J.F. and van der Giessen, E. ( 1994). Mathematical Modelling of Inelastic Deformation, London, Chapman & Hall.
6.
Betten, J. ( 2005). Creep Mechanics, Berlin, Springer.
7.
Blum, W. ( 2008). Mechanisms of Creep Deformation in Steel. In: Abe, F., Kern, T.-U. and Viswanathan, R. (eds), Creep-Resistant Steels, Cambridge, Woodhead Publishing, pp. 365-402.
8.
Chaboche, J.L. ( 2008). A Review of Some Plasticity and Viscoplasticity Constitutive Equations, International Journal of Plasticity, 24: 1642-1693.
9.
de Borst, R. ( 2004). Damage, Material Instabilities, and Failure. In: Stein, E., de Borst, R. and Hughes, T.J.R. (eds), Encyclopedia of Computational Mechanics, Chichester, John Wiley & Sons, pp. 335-373.
10.
Dyson, B.F. and McLean, M. ( 2001). Micromechanism-quantification for Creep Constitutive Equations. In: Murakami, S. and Ohno, N. (eds), IUTAM Symposium on Creep in Structures, Dordrecht, Kluwer , pp. 3-16.
11.
Frederick, C.O. and Armstrong, P.J. ( 2007). A Mathematical Representation of the Multiaxial Bauschinger Effect, Materials at High Temperatures, 24: 1-26.
12.
Frost, H.J. and Ashby, M.F. ( 1982). Deformation-Mechanism Maps, Oxford , Pergamon.
13.
Gandy, D. ( 2006). X20CrMoV12-1 Steel Handbook, Technical Report, Electric Power Research Institute, 1012740, Palo Ato.
14.
Hayhurst, D.R. ( 1999). Materials Data Bases and Mechanisms-based Constitutive Equations for use in Design. In: Altenbach, H. and Skrzypek, J. (eds), Creep and Damage in Materials and Structures, CISM Lecture Notes No. 399, Wien, New York, Springer, pp. 285-348.
15.
Hayhurst, D.R. ( 2001). Computational Continuum Damage Mechanics: Its Use in the Prediction of Creep Fracture in Structures - Past, Present and Future . In: Murakami, S. and Ohno, N. (eds), IUTAM Symposium on Creep in Structures, Dordrecht, Kluwer , pp. 175-188.
16.
Hoff, N.J. ( 1953). The Necking and the Rupture of Rods Subjected to Constant Tensile Loads, Transactions of ASME Journal of Applied Mechanics , 20: 105-108.
17.
Kimura, K. ( 2006). 9Cr-1Mo-V-Nb Steel. In: Martienssen, W. (ed.), Creep Properties of Heat Resistant Steels and Superalloys, Berlin, Springer, pp. 126-133.
18.
Kimura, K., Kushima, H. and Sawada, K. ( 2009). Long-term Creep Deformation Properties of 9Cr-1Mo Steel , Materials Science and Engineering, A510-A511: 58-63.
19.
Kloc, L. and Sklenička, V. ( 2004). Confirmation of Low Stress Creep Regime in 9% Chromium Steel by Stress Change Creep Experiments, Materials Science and Engineering, A387-A389: 633-638.
20.
Kostenko, E. and Naumenko, K. ( 2008). Numerische Zeitstandanalyse einer Kraftwerkskomponente mit einem Kriechschädigungs-Werkstoffmodell, In: 31. FVW/ FVHT Vortragsveranstaltung: Langzeitverhalten warmfester Stahle und Hochtemperaturwerkstoffe , Düsseldorf, Stahlinstitut VDEh, pp. 37-46.
21.
Kostenko, Y., Schwass, G. and Naumenko, K. ( 2009). Creep Analysis of Power Plant Components from 1%CrMoV and 10%CrMoV Steels. In: Shibli, I.A. and Holdsworth, S.R. (eds), Creep & Fracture in High Temperature Components, Lancaster , Pennsylvania, DEStech Publications , pp. 797-805.
22.
Kowalewski, Z.L., Hayhurst, D.R. and Dyson, B.F. ( 1994). Mechanisms-based Creep Constitutive Equations for an Aluminium Alloy, Journal of Strain Analysis, 29: 309-316.
23.
Krawietz, A. ( 1986). Materialtheorie. Mathematische Beschreibung des phänomenologischen thermomechanischen Verhaltens, Berlin, Springer.
24.
Lemaitre, J. ( 1996). A Course on Damage Mechanics, Berlin , Springer.
25.
Lemaitre, J. and Chaboche, J.-L. ( 1990). Mechanics of Solid Materials, Cambridge , Cambridge University Press.
26.
Lin, J., Liu, Y. and Dean, T.A. ( 2005). A Review on Damage Mechanisms, Models and Calibration Methods Under Various Deformation Conditions, International Journal of Damage Mechanics, 14: 299-319.
27.
Maile, K. and Scheck, R. ( 2008). Kriechschädigungsentwicklung in 9-11%Cr Stählen , In: 31. FVW/FVHT Vortragsveranstaltung: Langzeitverhalten warmfester Stähle und Hochtemperaturwerkstoffe, Düsseldorf , Stahlinstitut VDEh, pp. 15-26.
28.
Mayer, K.-H. and Masuyama, F. ( 2008). The Development of Creep-resistant Steels. In: Abe, F., Kern, T.-U. and Viswanathan, R. (eds), Creep-resistant Steels, Cambridge, Woodhead Publishing, pp. 15-77.
29.
Murakami, S. and Sanomura, Y. ( 1985). Creep and Creep Damage of Copper Under Multiaxial States of Stress. In: Sawczuk, A. and Bianchi, B. (eds), Plasticity Today- Modelling, Methods and Applications, London, New York, Elsevier, pp. 535-551.
30.
Naumenko, K. and Altenbach, H. ( 2007). Modelling of Creep for Structural Analysis, Berlin, Springer.
31.
Naumenko, K., Altenbach, H. and Gorash, Y. ( 2009). Creep Analysis with a Stress Range Dependent Constitutive Model, Archive of Applied Mechanics, 79: 619-630.
32.
Naumenko, K. and Kostenko, Y. ( 2009). Structural Analysis of a Power Plant Component using a Stress-range-dependent Creep-damage Constitutive Model, Materials Science and Engineering, A510-A511: 169-174.
33.
Odqvist, F.K.G. ( 1974). Mathematical Theory of Creep and Creep Rupture, Oxford, Oxford University Press.
34.
Onat, E.T. and Leckie, F.A. ( 1988). Representation of Mechanical Behavior in The Presence of Changing Internal Structure, Transactions of ASME: Journal of Applied Mechanics, 55: 1-10.
35.
Penny, R.K. and Mariott, D.L. ( 1995). Design for Creep, London, Chapman & Hall.
36.
Perrin, I.J. and Hayhurst, D.R. ( 1994). Creep Constitutive Equations for a 0.5Cr-0.5Mo-0.25V Ferritic Steel in the Temperature Range 600-675°C, Journal of Strain Analysis, 31: 299-314.
37.
Polcik, P. ( 1999). Modellierung des Verformungsverhaltens der warmfesten 9-12% Cromstähle im Temperaturbereich von 550-560°C, Dissertation, Universität Erlangen-Nürnberg, Aachen.
38.
Polcik, P., Sailer, T., Blum, W., Straub, S., Buršik, J. and Orlová, A. ( 1999). On the Microstructural Development of the Tempered Martensitic Cr-steel P91 During Long-term Creep - a Comparison of Data, Materials Science and Engineering, A260: 252-259.
39.
Polcik, P., Straub, S., Henes, D. and Blum, W. ( 1998). Simulation of the Creep Behaviour of 9-12% CrMo-V Steels on the Basis of Microstructural Data. In: Strang, A., Cawley, J. and Greenwood, G.W. (eds), Microstructural Stability of Creep Resistant Alloys for High Temperature Plant Applications, Cambridge, Cambridge University Press, pp. 405-429.
40.
Rabotnov, Y.N. ( 1963). O Razrushenii Vsledstvie Polzuchesti (On Fracture as a Consequence of Creep, in Russ.), Prikladnaya mekhanika i tekhnicheskaya fizika, 2: 113-123.
41.
Rauch, M., Maile, K., Seliger, P., Reuter, A. and Tilsch, H. ( 2004). Numerische Berechnung und Experimentelle Validierung der Schädigungsentwicklung in 9%-Cromstählen, In: 27. FVW/FVHT Vortragsveranstaltung: Langzeitverhalten warmfester Stähle und Hochtemperaturwerkstoffe, Düsseldorf, Stahlinstitut VDEh, pp. 75-83.
42.
Rieth, M., Falkenstein, A., Graf, P., Heger, S., Jäntsch, U., Klimiankou, M. et al. (2004). Creep of the Austenitic Steel AISI 316 L(N) . Experiments and Models, Technical Report, Forschungszentrum Karlsruhe, FZKA7065, Karlsruhe .
43.
Sakane, M. and Tokura, H. ( 2002). Experimental Study of Biaxial Creep Damage for Type 304 Stainless Steel, International Journal of Damage Mechanics , 11: 247-262.
44.
Simon, A. ( 2007). Zur Berechnung betriebsnah belasteter Hochtemperaturstähle mit einem konstitutiven Werkstoffmodell, Dissertation, Technische Universität Darmstadt, Berichte aus der Werkstofftechnik, Band 4/2007, Aachen .
45.
Straub, S. ( 1995). Verformungsverhalten und Mikrostruktur warmfester martensitischer 12%Chromstähle, Dissertation, Universität Erlangen-Nürnberg , Fortschr.-Ber. VDI Reihe5, Nr. 405, Düsseldorf.
46.
Straub, S., Blum, W., Polcik, P., Eifler, D., Borbély, A. and Ungár, T. ( 1997). Microstructural Stability of the Martensitic Steel X20CrMoV12-1 After 130000 h of Service at 530°C, Steel Research, 68: 368-373.
