An embedded Fiber Bragg Grating (FBG) strain sensor and an FBG temperature sensor have been shown to be able to accurately monitor the industrial composite cure process of a glass/ epoxy plate devoted to aeronautical applications. The internal absolute strain level in the plate was determined, free of temperature effect thanks to a differential method. After curing, a residual compression strain of about -0.22% was observed, which represents a short part of the range in compression for a single mode fiber. Later on, the embedded FBG strain sensor could be used as a smart sensor for the health monitoring of composite structures, e.g. for impact or layer delamination detection.
Get full access to this article
View all access options for this article.
References
1.
Ball G. A. and W. W. Morey, 1994, "Compression-tuned single-frequency Bragg grating fiber laser,"Optics Letters, Vol. 19, no. 23, December 1, pp. 1979-1981.
2.
Dunphy J. R. , G. Meltz, F. P. Lamm and W. W. Morey, 1990, "Multifunction, distributed optical fiber sensor for composite cure and response monitoring," Proc. SPIE, Vol. 1370, Fiber Optic Smart Structures and Skins III, pp. 116-118.
3.
Ferdinand P. et al., 1994, "Mine operating accurate stability control with optical fiber sensing and Bragg grating technology: the BRITE-EURAM STABILOS Project,"10th Optical Fiber Sensor Conference, 11-13, Glasgow, pp. 162-166; and extended paper, J. of Ligthwave Technol., Vol. 13, no. 7, pp. 1303-1313.
4.
Levin K. and S. Nilsson, 1996, "Examination of reliability of fiber optic sensors embedded in carbon/epoxy composite,"Third International Conference on Intelligent Materials/European Conference on Smart Structures and Materials (ICBM/ECSSM), June 3-5, Lyon, France, pp. 222-229.
5.
Merzbacher C. I. , A. D. Kersey and E. J. Friebele, 1996, "Fiber optic sensors in concrete structures: a review,"Smart Materials and Structures, no. 5, pp. 196-208.
6.
Morey W. W. et al., 1992, "Evaluation of a Fiber Bragg Grating hydrostatic pressure sensor,"8th Optical Fiber Sensor Conference, 29-31 January, Monterey, Post Deadline Paper.
