Effect of auxetic honeycomb angular stiffeners in cold-formed perforated and webbed steel upright section under buckling modes

Abstract

This work was carried out on the buckling effects of cold-formed perforated steel columns with base auxetic polymer stiffeners. Buckling tests were carried out for three thicknesses of steel profiles (1.5–1.8 mm) with and without base stiffeners. Loading conditions were considered to be with displacement variation of 0.1 mm/s and respective axial loads and lateral displacements were noted. Results obtained states that the lateral displacement was found to be 2.2 for 1.8 mm CFS thickness and 93 kN of axial load with the use of auxetic stiffener with 14.8% of the variation in comparison without stiffener. The strain energy of absorption for auxetic stiffener is found to be high as 0.0523 at a lateral load of 80 kN for 1.8 mm CFS thickness. The maximum resistance to local, distortional, and Euler’s buckling loads was found to be high for 1.8 mm thick CFS with stiffener with 11.1%, 17.39%, and 10% in comparison without stiffener.