Strain rate dependent formulation of the latent heat evolution of superelastic shape memory alloy wires incorporated in multistory frame structures

Abstract

Due to their unique hysteretic energy dissipation capacity, shape memory alloy (SMA) wires are particularly interesting for the development of new-type of intelligent vibration control systems for structures. However, in structural control, most of the vibrations occur in high strain rate regimes, which interfere the release of self-generated heat and thus influence the hysteretic dissipation. This paper proposes a strain rate dependent formulation of the latent heat evolution and aims to improve the accuracy of existing macroscopic modeling approaches developed for SMA wires particularly for the dynamic load cases. The proposed formulation is determined phenomenologically and implemented in a continuum thermomechanical framework based constitutive SMA wire model without impairing the simplicity and robustness of the solution process. The proposed formulation is validated by cyclic tensile tests conducted on SMA wires. Results show that the calculations using the formulation can predict the wire response more accurately than the strain rate independent formulation. For the simulation of multistory frame structures incorporating multiple SMA wires, the governing equations are driven. Shaking table tests are conducted on a 3-story frame structure under harmonic and seismic excitation. The responses of the structure are successfully replicated using the strain rate dependent latent heat formulation.