Different from conventional hydrostatic or hydrodynamic journal bearings, an ultrasonic journal bearing provides carrying force by air squeeze film generated by high-frequency vibration of bearing bush surfaces. Detailed investigation indicates that studies on levitating force modeling based on fluid dynamics for ultrasonic journal bearings are rarely conducted, and the existing theoretical models generally neglect some significant contributors to levitating force such as gas inertia, surface topography, rarefaction effect, or boundary effect. A modified Reynolds-type equation considering these factors is put forward in this study to predict the ultrasonic journal bearing’s carrying capacity. The numerical solving results can interpret the experimental data well. The proposed model will provide theoretical reference for the design of ultrasonic journal bearings.
AndradeMABBernassauALAdamowskiJC (2016) Acoustic levitation of a large solid sphere. Applied Physics Letters109(4): 044101.
2.
CannPMELubrechtAA (2007) Bearing performance limits with grease lubrication: the interaction of bearing design, operating conditions and grease properties. Journal of Physics D: Applied Physics40(18): 5446–5451.
3.
ChenCWangJJiaBet al. (2013) Design of a noncontact spherical bearing based on near-field acoustic levitation. Journal of Intelligent Material Systems and Structures25(6): 755–767.
4.
GaldiGP (2011) An Introduction to the Mathematical Theory of the Navier-Stokes Equations. New York: Springer, pp. 1–24.
5.
GlavatskihSB (2004) A method of temperature monitoring in fluid film bearings. Tribology International37(2): 143–148.
6.
HaDNStolarskiTAYoshimotoS (2005) An aerodynamic bearing with adjustable geometry and self-lifting capacity. Part 1: self-lift capacity by squeeze film. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology219(1): 33–39.
7.
HoriY (2006) Hydrodynamic Lubrication. Tokyo, Japan: Springer-Verlag, pp. 137–159.
8.
IdeTFriendJNakamuraKet al. (2007) A non-contact linear bearing and actuator via ultrasonic levitation. Sensors and Actuators A: Physical135(2): 740–747.
9.
KeinanEEzraENahmiasY (2015) Opposing shear-induced forces dominate inertial focusing in curved channels and high Reynolds numbers. Applied Physics Letters107(19): 193507.
10.
LiJLiuPDingHet al. (2011) Nonlinear restoring forces and geometry influence on stability in near-field acoustic levitation. Journal of Applied Physics109(8): 084518.
11.
LiuCSLinPD (2008) Analysis and validations of fluid dynamic bearing for spindle motors of high-density optical disc players. Japanese Journal of Applied Physics47(10): 8101–8105.
12.
LiuYYangXChenWet al. (2016) A bonded-type piezoelectric actuator using the first and second bending vibration modes. IEEE Transactions on Industrial Electronics63(3): 1676–1683.
13.
PandeyAKPratapR (2004) Coupled nonlinear effects of surface roughness and rarefaction on squeeze film damping in MEMS structures. Journal of Micromechanics and Microengineering14(10): 1430–1437.
14.
ShenSChenG (2008) A kinetic theory analysis on the heat transfer in hard drive air bearing. Journal of Applied Physics103(5): 054304.
15.
ShenSYangRChenGet al. (2010) Nonlocal formulation of the Reynolds equation for rarefied gas flow with steep pressure variation. Journal of Applied Physics107(10): 104316.
16.
ShouTYoshimotoSStolarskiT (2013) Running performance of an aerodynamic journal bearing with squeeze film effect. International Journal of Mechanical Sciences77: 184–193.
17.
StolarskiTA (2014) Acoustic levitation: a novel alternative to traditional lubrication of contacting surfaces. Tribology Online9(4): 164–174.
18.
StolarskiTAChaiW (2013) Inertia effect in squeeze film air contact. Tribology International41(8): 716–723.
19.
WangCAuYHJ (2011) Study of design parameters for squeeze film air journal bearing: excitation frequency and amplitude. Mechanical Sciences2(2): 147–155.
20.
WangCAuYHJ (2013) Comparative performance of squeeze film air journal bearings made of aluminium and copper. International Journal of Advanced Manufacturing Technology65(1): 57–66.
21.
YoshimotoSShouTSomayaK (2013) Vertical attractive force generated in a noncontact chuck using ultrasonic vibration. Precision Engineering37(4): 805–811.
22.
ZhangWMMengGHuangHet al. (2008) Characteristics analysis and dynamic responses of micro-gas-lubricated journal bearings with a new slip model. Journal of Physics D: Applied Physics41(15): 155305.
23.
ZhaoSMojrzischSWallaschekJ (2013) An ultrasonic levitation journal bearing able to control spindle center position. Mechanical Systems and Signal Processing36(1): 168–181.
