Sage Journals: Discover world-class research

Abstract

The future generation of high-lift devices needs to be improved to reduce the noise footprint and increase the performance for takeoff and landing of transport aircraft. To contribute to these goals, an active blown Coandă flap-based high-lift system is being investigated within the German national Collaborative Research Center 880 as an alternative to the state-of-the-art flaps. A key part of this system is an adaptive gapless droop nose with extremely large morphing deformation. The design and construction of this component are based on a structural optimization framework. The framework consists of two hierarchical design steps: an optimization of the hybrid composite skin layout with integral T-stringers, acting as joints to the inner actuation mechanism, and the kinematic optimization of the latter. A hybrid skin structure allows a large curvature to rupture in the morphing direction, while providing high stiffness in the transverse direction. This article describes a full-scale hybrid composite morphing droop nose and its structural tests. The results of these tests are finally compared to the finite element simulation and applied for validation of the optimization framework. A sensitivity analysis is provided to evaluate the influence of modelling and manufacturing uncertainties to the shape quality.

Keywords

Leading edge morphing adaptive structures full-scale structural demonstrator hybrid composites

Get full access to this article

View all access options for this article.

References

Advisory Council for Aviation Research and Innovation in Europe (ACARE 2050) (2011) Flightpath 2050 Europe’s Vision for Aviation. Luxembourg: Publications Office of the European Union, p. 15.

Ajaj

Friswell

Bourchak

et al . (2016) Span morphing using the GNATSpar wing. Aerospace Science and Technology 53: 38–46.

Barbarino

Bilgen

Ajaj

et al . (2011) A review of morphing aircraft. Journal of Intelligent Material Systems and Structures 22(9): 823–877.

Burnazzi

Radespiel

(2014) Assessment of leading-edge devices for stall delay on an airfoil with active circulation control. CEAS Aeronautical Journal 5(4): 359–385.

De Gaspari

Ricci

(2011) A two-level approach for the optimal design of morphing wings based on compliant structures. Journal of Intelligent Material Systems and Structures 22(10): 1091–1111.

Falcão

Gomes

Suleman

(2011) Aero-structural design optimization of a morphing wingtip. Journal of Intelligent Material Systems and Structures 22(10): 1113–1124.

Federal Aviation Administration (FAA) (2015) United States aviation greenhouse gas emissions reduction plan. Available at: https://www.faa.gov/nextgen/update/progress_and_plans/environment/ (accessed 1 November 2016).

Gamboa

Santos

(2016) Telescopic wing-box for a morphing wing. In: Proceedings of the 24th AIAA/AHS adaptive structures conference, AIAA SciTech forum, San Diego, CA, 4–8 January.

Heinze

Radespiel

(2014) SFB 880: fundamentals of high lift for future commercial aircraft. CEAS Aeronautical Journal 5(3): 239–251.

10.

Kintscher

Heintze

Monner

(2010) Structural design of a smart leading edge device for seamless and gapless high lift systems. In: Proceedings of the 1st EASN association workshop on aerostructures, Paris, 7–8 October.

11.

Kintscher

Kirn

Storm

et al . (2015) Assessment of the SARISTU enhanced adaptive droop nose. In: Wölcken

Papadopoulos

(eds) Smart Intelligent Aircraft Structures (SARISTU). Cham: Springer International Publishing, pp. 113–140.

12.

Kreth

König

Wild

(2007) Aircraft noise determination of novel wing configurations. In: Proceedings of the inter-noise 2007, Istanbul, 28–31 August.

13.

Kota

(2005) An effective method of synthesizing compliant adaptive structures using load path representation. Journal of Intelligent Material Systems and Structures 16(4): 307–317.

14.

Nelder

Mead

(1965) A simplex method for function minimization. The Computer Journal 7(4): 308–313.

15.

Radestock

Riemenschneider

Monner

et al . (2015) Experimental investigation of a compliant mechanism for an UAV leading edge. In: Proceedings of the 7th ECCOMAS thematic conference on smart structures and materials (SMART 2015), Ponta Delgada, 3–6 June.

16.

Schmitz

Horst

(2014a) A finite element unit-cell method for homogenised mechanical properties of heterogeneous plates. Composites Part A: Applied Science and Manufacturing 61: 23–32.

17.

Schmitz

Horst

(2014b) A new curvature morphing skin: manufacturing, experimental and numerical investigations. In: Proceedings of the 16th European conference on composite materials, Seville, 22–26 June.

18.

Schmitz

Horst

(2015a) Buckling of multiple discrete composite bundles in the elastomeric foundation of a curvature-morphing skin. Composite Structures 134: 1014–1023.

19.

Schmitz

Horst

(2015b) Development and investigation of a hybrid curvature-morphing skin structure. In: Proceedings of the 20th international conference on composite materials, Copenhagen, 19–24 July.

20.

Sun

Guan

Liu

et al . (2016) Morphing aircraft based on smart materials and structures: a state-of-the-art review. Journal of Intelligent Material Systems and Structures 27: 2289–2312.

21.

Takahashi

Yokozeki

Hirano

(2016) Development of variable camber wing with morphing leading and trailing sections using corrugated structures. Journal of Intelligent Material Systems and Structures 27: 2827–2836.

22.

Vasista

De Gaspari

Ricci

et al . (2016) Compliant structures-based wing and wingtip morphing devices. Aircraft Engineering and Aerospace Technology: An International Journal 88(2): 311–330.

23.

Weisshaar

(2013) Morphing aircraft systems: historical perspectives and future challenges. Journal of Aircraft 50(2): 337–353.

Extremely deformable morphing leading edge: Optimization,design and structural testing

Abstract

Keywords

Get full access to this article

References