Semi-active structural elements based on variable stiffness represent a promising approach to the solution of the conflict of requirements between load-carrying capability and shape adaptivity in morphing lightweight structures. In the present work, a structural concept with adaptive bending–twist coupling aiming at a broad adjustment range of coupling stiffness while maintaining high flexural rigidity is investigated by analysis, simulation and experiment.
AjajRMFriswellMIDettmerWG. (2011) Conceptual modeling of an adaptive torsion wing structure. In: 52nd AIAA/ASME/ASCE/AHS/ASC structures, structural dynamics and materials conference, AIAA 2011–1883. Denver, CO, 4–7 April.
2.
AmprikidisMCooperJE (2004) Experimental validation of wing twist control using adaptive internal structures. In: 45th AIAA/ASME/ASCE/AHS/ASC structures, structural dynamics & materials conference, AIAA 2004–1884. Palm Springs, California, 19–22 April.
3.
AmprikidisMCooperJESensburgO (2004) Development of an adaptive stiffness all-moving vertical tail. In: 45thAIAA/ASME/ASCE/AHS/ASC structures, structural dynamics and materials conference, AIAA 2004–1883. Palm Springs, California, 19–22 April.
4.
BergaminiAChristenRMaagB. (2006) A sandwich beam with electrostatically tunable bending stiffness. Smart Materials and Structures15: 678.
5.
BornscheuerFW (1952) Systematische Darstellung des Biege- und Verdrehvorganges unter besonderer Berücksichtigung der Wölbkrafttorsion. Der Stahlbau21: 1–9.
6.
BredtR (1896) Kritische Bemerkungen zur Drehungselastizität. Zeitschrift des Vereines deutscher Ingenieure40(29): 813–817.
7.
CampanileLF (2007) Lightweight shape-adaptable airfoils: a new challenge for an old dream. In: WaggDBondIWeaverP. (eds) Adaptive Structures: Engineering Applications. Chichester: John Wiley & Sons. pp. 89–135.
8.
ChenPCSarhaddiDJhaR. (2000) Variable stiffness spar approach for aircraft maneuver enhancement using ASTROS. Journal of Aircraft37(5): 865–871.
9.
CooperJE (2006) Adaptive stiffness structures for air vehicle drag reduction. In: Multifunctional structures/integration of sensors and antennas: meeting proceedings RTO-MP-AVT-141, Nueuilly-sur-Seine, France, Paper 15, pp. 15-1–15-12.
10.
Deutsches Institut für Normung (2009) Metallic Materials – Tensile Testing – Part 1: Method of Test at Room Temperature (ISO 6892-1:2009). Berlin.
11.
Deutsches Institut für Normung (2010a) Plastics – Determination of Tensile Properties – Part 1: General Principles (ISO/DIS 527-1:2010). Berlin.
12.
Deutsches Institut für Normung (2010b) Plastics – Determination of Tensile Properties – Part 2: Test Conditions for Moulding and Extrusion Plastics (ISO/DIS 527-2:2010). Berlin.
13.
Di LilloLRaitherWDi FrattaC. (in press) Mechanical characterization of electro-bonded laminates. In: ASME 2012 conference on smart materials, adaptive structures and intelligent systems (SMASIS). Stone Mountain, Georgia, 19–21 September.
14.
EulerL (1744) Methodus inveniendi lineas curvas maximi minimive proprietate gaudentes, sive solutio problematis isoperimetrici lattissimo sensu accepti. Lausanne/Geneva: Bousquet.
15.
FöpplA (1917) Der Drillungswiderstand von Walzeisenträgern. Zeitschrift des Vereines deutscher Ingenieure61(33): 694–695.
16.
GandhiFKangSG (2007) Beams with controllable flexural stiffness. Smart Materials and Structures16: 1179–1184.
17.
GordonBOClarkWW (2007) Morphing structures by way of stiffness variations. In: The 48th AIAA/ASME/ASCE/AHS/ASC structures, structural dynamics, and materials conference, Honolulu, HI. 23–26 April.
18.
GriffinKEHopkinsMA (1997) Smart stiffness for improved roll control. Journal of Aircraft34(3): 445–447.
19.
KaiserC (1999) Elastische Kopplungen in aktiven und passiven Laminaten sowie dünnwandigen Faserverbundbalken. PhD Thesis, Technische Universität München, München, Germany.
20.
LambourneNC (1969) Calculations Showing the Influence of Aerodynamic Damping on Binary Wing Flutter (Aeronautical Research Council). Her Majesty’s Stationery Office, London.
21.
NavierCLMH (1826) Résumé des leçons données à l’Ecole des ponts et chaussées sur l’application de la mécanique à l’établissement des constructions et des machines. Firmin Didot. Paris.
22.
PilkeyWD (2007) Analysis and Design of Elastic Beams: Computational Methods. New York: John Wiley & Sons.
23.
RaitherWBergaminiAGandhiF. (in press) Adaptive bending-twist coupling in laminated composite plates by controllable shear stress transfer. Composites Part A-Applied Science and Manufacturing.
24.
ShirkMHHertzTJWeisshaarTA (1986) Aeroelastic tailoring – theory, practice, and promise. Journal of Aircraft23(1): 6–18.
25.
TimoshenkoSP (1921) On the correction for shear of the differential equation for transverse vibrations of prismatic bars. Philosophical Magazine Series 641(245): 744–746.
26.
Van KrevelenDWTe NijenhuisK (2009) Properties of Polymers: Their Correlation with Chemical Structure; Their Numerical Estimation and Prediction from Additive Group Contributions. Amsterdam: Elsevier.
27.
VlasovVZ (1961) Thin-Walled Elastic Beams. Jerusalem, Israel: Israel Program for Scientific Translations.
28.
WagnerHPretschnerW (1934) Verdrehung und Knickung von offenen Profilen. Luftfahrtforschung11: 174–180.
