A vibration-based energy harvester suitable for low-frequency,high-amplitude environments: Theoretical and experimental investigations

Abstract

This article presents theoretical and experimental investigations of a vibration-based energy harvester which is suitable to extract energy from low-frequency, high-amplitude environments. The proposed device consists of a rotating proof mass and eight piezoelectric bimorph beams. A magnet, mounted on the rotating pendulum, actuates the tips of the piezoelectric beams due to magnetic interaction. The free oscillations of the piezoelectric beam generate energy each time the pendulum passes over the beams. Based on energy principles, the nonlinear ordinary differential equations governing the electromechanical behavior of the system are derived and solved numerically. Using the proposed model, the effects of angular velocity of the rotating mass on the generated voltage are investigated. It is shown that the harvester with a relatively high angular velocity generates more voltage than the one with a low angular velocity. The performance of the proposed device in the attractive and the repulsive cases is compared to each other and it is concluded that the generated voltage of the attractive case is more than that of the repulsive case. The overall generated power of the harvester under harmonic external excitations is investigated for various amplitudes and frequencies. Using theoretical model, it is shown that the proposed device can be used for harvesting the out-of-plane vibrational energy. A model of the system has been devised and tested. The obtained experimental results show good qualitative agreements with the theoretical ones.

Keywords

Energy harvesting rotating proof mass high-amplitude low-frequency environments frequency up-converting mechanism

Get full access to this article

View all access options for this article.

References

Anton

Sodano

(2007) A review of power harvesting using piezoelectric materials (2003–2006). Smart Materials and Structures 16: R1–R21.

Arms

Townsend

Churchill

. (2005) Power management for energy harvesting wireless sensors. In: Proceedings of the smart structures and materials conference, SPIE, San Diego, CA, 6 March, pp. 267–275. Bellingham, WA: SPIE.

Bressers

Avirovik

Lallart

. (2011) Contact-less wind turbine utilizing piezoelectric bimorphs with magnetic actuation. In: Proulx

(Ed.) Structural Dynamics, vol. 3. New York: Springer, pp. 233–243.

Cottone

Vocca

Gammaitoni

(2009) Nonlinear energy harvesting. Physical Review Letters 102: 080601.

Du Plessis

Huigsloot

Discenzo

(2005) Resonant packaged piezoelectric power harvester for machinery health monitoring. In: Proceedings of the smart structures and materials conference, SPIE, San Diego, CA, 6 March, pp. 224–235. Bellingham, WA: SPIE.

El-hami

Glynne-Jones

White

. (2001) Design and fabrication of a new vibration-based electromechanical power generator. Sensors and Actuators A: Physical 92: 335–342.

Erturk

Hoffmann

Inman

(2009) A piezomagnetoelastic structure for broadband vibration energy harvesting. Applied Physics Letters 94: 254102.

Galchev

Hanseup

Najafi

(2011) Micro power generator for harvesting low-frequency and nonperiodic vibrations. Journal of Microelectromechanical Systems 20: 852–866.

Livermore

(2011) Impact-driven, frequency up-converting coupled vibration energy harvesting device for low frequency operation. Smart Materials and Structures 20: 045004.

10.

Inman

Grisso

(2006) Towards autonomous sensing. In: Proceedings of the smart structures and materials conference, SPIE, San Diego, CA, February 26, 2006. p. 61740T. Bellingham, WA: SPIE.

11.

Karami

Farmer

Inman

(2013) Parametrically excited nonlinear piezoelectric compact wind turbine. Renewable Energy 50: 977–987.

12.

Koplow

Bhattacharyya

Mann

(2006) Closed form solutions for the dynamic response of Euler–Bernoulli beams with step changes in cross section. Journal of Sound and Vibration 295: 214–225.

13.

Lei

Yuan

(2008) Vibration energy harvesting by magnetostrictive material. Smart Materials and Structures 17: 045009.

14.

Lhermet

Condemine

Plissonnier

. (2008) Efficient power management circuit: from thermal energy harvesting to above-IC microbattery energy storage. IEEE Journal of Solid-State Circuits 43: 246–255.

15.

Michael

Paolo

Rob

. (2009) Harvesting energy from the motion of human limbs: the design and analysis of an impact-based piezoelectric generator. Smart Materials and Structures 18: 035001.

16.

Pillatsch

Yeatman

Holmes

(2012) A scalable piezoelectric impulse-excited energy harvester for human body excitation. Smart Materials and Structures 21: 115018.

17.

Pillatsch

Yeatman

Holmes

(2014) A piezoelectric frequency up-converting energy harvester with rotating proof mass for human body applications. Sensors and Actuators A: Physical 206: 178–185.

18.

Roundy

Wright

(2004) A piezoelectric vibration based generator for wireless electronics. Smart Materials and Structures 13: 1131.

19.

Roundy

Wright

Rabaey

(2003) A study of low level vibrations as a power source for wireless sensor nodes. Computer Communication 26: 1131–1144.

20.

Sanders

Lee

(1996) Implantable pacemakers. Proceedings of the IEEE 84: 480–486.

21.

Stanton

McGehee

Mann

(2010) Nonlinear dynamics for broadband energy harvesting: investigation of a bistable piezoelectric inertial generator. Physica D: Nonlinear Phenomena 239: 640–653.

22.

Cai

(2012) A retrofitted energy harvester for low frequency vibrations. Smart Materials and Structures 21: 075007.

23.

Yeatman

(2008) Energy harvesting from motion using rotating and gyroscopic proof masses. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 222: 27–36.

24.

Yung

Landecker

Villani

(1998) An analytic solution for the force between two magnetic dipoles. Magnetic and Electrical Separation 9: 39–52.