The exploitation of nonlinear behavior in vibration-based energy harvesters has received much attention over the last decade. One key motivation is that the presence of nonlinearities can potentially increase the bandwidth over which the excitation is amplified and therefore the efficiency of the device. In the literature, references to resonating energy harvesters featuring nonlinear oscillators are common. In the majority of the reported studies, the harvester powers purely resistive loads. Given the complex behavior of nonlinear energy harvesters, it is difficult to identify the optimum load for this kind of device. In this paper the aim is to find the optimal load for a nonlinear energy harvester in the case of purely resistive loads. This work considers the analysis of a nonlinear energy harvester with hardening compliance and electromagnetic transduction under the assumption of negligible inductance. It also introduces a methodology based on numerical continuation which can be used to find the optimum load for a fixed sinusoidal excitation.
BakerJRoundySWrightP (2005) Alternative geometries for increasing power density in vibration energy scavenging for wireless sensor networks. In: Proceedings of 3rd international energy conversion engineering conference, San Francisco, CA, 15–18 August 2005, pp.1–12.
2.
BartonDBurrowS (2010) Numerical continuation in a physical experiment: Investigation of a nonlinear energy harvester. Journal of Computational and Nonlinear Dynamics6(1): 011010.
3.
BurrowSClareL (2007) A resonant generator with non-linear compliance for energy harvesting in high vibrational environments. In: Proceedings of IEEE international electric machines and drives conference (IEMDC’07), Antalya, Turkey, 3–5 May 2007, Vol. 1, pp.715–720.
4.
CammaranoA (2012) Increasing the bandwidth of resonant vibration-based energy harvesters. PhD Thesis, University of Bristol, UK.
5.
CammaranoABurrowSBartonD (2011) Modelling and experimental characterization of an energy harvester with bi-stable compliance characteristics. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering225(4): 475–484.
6.
CammaranoABurrowSBartonD. (2010) Tuning a resonant energy harvester using a generalized electrical load. Smart Materials and Structures19(5): 055003.
7.
ChallaVPrasadMShiY. (2008) A vibration energy harvesting device with bidirectional resonance frequency tunability. Smart Materials and Structures17(1): 15035.
8.
CottoneFVoccaHGammaitoniL (2009) Nonlinear energy harvesting. Physical Review Letters102(8): 080601.
9.
DaqaqMStablerCQaroushY. (2009) Investigation of power harvesting via parametric excitations. Journal of Intelligent Material Systems and Structures20(5): 545–557.
10.
DoedelEChampneysAFairgrieveT. (1997) Auto 97: Continuation and bifurcation software for ordinary differential equations (with homcont).
11.
ErturkAHoffmannJInmanD (2009) A piezomagnetoelastic structure for broadband vibration energy harvesting. Applied Physics Letters94(25): 254102.
12.
KaramiMInmanD (2011) Equivalent damping and frequency change for linear and nonlinear hybrid vibrational energy harvesting systems. Journal of Sound and Vibration330(23): 5583–5597.
13.
KimJRyuYChoiS (2000) New shunting parameter tuning method for piezoelectric damping based on measured electrical impedance. Smart Materials and Structures9(6): 868–877.
14.
LiaoYSodanoH (2009) Structural effects and energy conversion efficiency of power harvesting. Journal of Intelligent Material Systems and Structures20(5): 505–514.
15.
MannBSimsN (2009) Energy harvesting from the nonlinear oscillations of magnetic levitation. Journal of Sound and Vibration319(1–2): 515–530.
16.
NeildSWaggD (2011) Applying the method of normal forms to second-order nonlinear vibration problems. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Science467(2128): 1141–1163.
17.
NeildSWaggD (2013) A generalized frequency detuning method for multidegree-of-freedom oscillators with nonlinear stiffness. Nonlinear Dynamics73(1–2): 649–663.
18.
RennoJDaqaqMInmanD (2009) On the optimal energy harvesting from a vibration source. Journal of Sound and Vibration320(1): 386–405.
19.
RoundySWrightP (2004) A piezoelectric vibration based generator for wireless electronics. Smart Materials and Structures13(5): 1131–1142.
20.
StantonSErturkAMannB. (2010) Nonlinear piezoelectricity in electroelastic energy harvesters: Modeling and experimental identification. Journal of Applied Physics108(7): 074903–074903.
21.
StephenN (2006) On energy harvesting from ambient vibration. Journal of Sound and Vibration293(1-2): 409–425.
22.
TorahRGlynne-JonesPTudorM. (2008) Self-powered autonomous wireless sensor node using vibration energy harvesting. Measurement Science and Technology19(12): 125202.
23.
TriplettAQuinnD (2009) The effect of non-linear piezoelectric coupling on vibration-based energy harvesting. Journal of Intelligent Material Systems and Structures20(16): 1959–1967.
24.
WickenheiserAGarciaE (2010) Power optimization of vibration energy harvesters utilizing passive and active circuits. Journal of Intelligent Material Systems and Structures21(13): 1343–1361.
25.
WilliamsCYatesR (1996) Analysis of a micro-electric generator for microsystems. Sensors and Actuators: A—Physical52(1–3): 8–11.
26.
XinZNeildSWaggD. (2013) Resonant response functions for nonlinear oscillators with polynomial type nonlinearities. Journal of Sound and Vibration332(7): 1777–1788.
