Abstract
We investigate metal–matrix composite metamaterials with embedded electrical switches made of shape memory nickel–titanium (Ni–Ti) for use in broadband radio frequency (RF) antennas. Experiments show that a Ni–Ti ribbon can form an electrical contact that opens and closes depending on the Ni–Ti phase being austenite or martensite. Finite element modeling of thermal gradients illustrates the phase change within the ribbon. Ultrasonic additive manufacturing (UAM), a solid-state additive manufacturing process, was utilized for embedding a Ni–Ti switch in an aluminum matrix. The aluminum matrix must have structural-grade strength for use in load-carrying antennas; thus, mechanical testing was conducted to quantify the longitudinal tensile, transverse tensile, and shear strength of the UAM matrix. Reconfiguration using a Ni–Ti switch was proven using a shape memory switch on a monopole RF antenna producing an operating frequency shift from 270 to 185 MHz when the switch is connected. A planar microstrip line was used to demonstrate signal transmission and reflection efficiency in a smaller, second switch. Transmission tests yielded less than −10 dB signal reflection proving the feasibility of reconfigurable planar antenna arrays using smart switches.
Keywords
Get full access to this article
View all access options for this article.