The behavior of a piezoelectric sensor is strongly affected by the bonding condition along the interface between the sensor and the host structure. This article presents an analytical study of the effect of the mechanical and geometrical properties of the adhesive layer on the coupled dynamic electromechanical behavior of a thin piezoceramic sensor bonded to an elastic medium. A sensor model with an imperfect adhesive bonding layer is proposed to simulate the two dimensional electromechanical behavior of the integrated system. The analytical solution of the problem is provided by solving the resulting integral equations in terms of the interfacial stress. Numerical simulation is conducted to study the effect of the bonding layer upon the dynamic response of the sensor under different loading frequencies. The interfacial debonding and its effect on the interlaminar strain and stress transfer mechanisms are discussed in detail.
Della, C.N. and Shu, D.2007. ‘‘Vibration of Delaminated Composite Laminates: A review,’’ Appl. Mech. Rev., 60:1-20.
9.
Dugnani, R.2007. ‘‘A Modified Global-Local Analysis Model of a PZT Disk Transducer Bonded to a Host Structure,’’ In: 6th International Workshop on Structural Health Monitoring, Stanford University, CA.
10.
Dugnani, R.2009. ‘‘Dynamic Behavior of Structure-mounted Disk-shape Piezoelectric Sensors Including the Adhesive Layer,’’J. Intell. Mater. Syst. Struct., 20:1553-1564.
11.
Gandhi, M.V. and Thompson, B.S.1992. Smart Materials and Structures, Chapman Hall, London.
12.
Giurgiutiu, V.2005. ‘‘Tuned Lamb Wave Excitation and Detection with Piezoelectric Wafer Active Sensors for Structural Health Monitoring,’’J. Intell. Mater. Syst. Struct., 16:291-305.
13.
Giurgiutiu, V. and Rogers, C.A.1999. ‘‘Modeling of the ElectroMechanical (E/M) Impedance Response of a Damaged Composite Beam,’’ Adapt. Struct. Mater. Syst., 59:39-46.
14.
Giurgiutiu, V. and Zagrai, A.2002. ‘‘Embedded Self-sensing Piezoelectric Active Sensors for On-line Structural Identification,’’J. Vib. Acoust., 124:116-124.
15.
Giurgiutiu, V., Zagrai, A. and Bao, J.2002. ‘‘Embedded Active Sensors for In-situ Structural Health Monitoring of Thin-wall Structures,’’J. Press. Vess. Technol., 124:134-145.
16.
Han, L., Wang, X.D. and Sun, Y.2008. ‘‘The Effect of Bonding Layer Properties on the Dynamic Behavior of Surface-bonded Piezoelectric Sensors,’’Int. J. Solids Struct., 45:5599-5612.
17.
Jin, C., Wang, X.D. and Zuo, M.J.2010. ‘‘The Dynamic Behavior of Surface-bonded Piezoelectric Actuators with Debonded Adhesive Layers,’’Acta Mechanica., 211:215-235.
18.
Lee, C.K. and Moon, F.C.1989. ‘‘Laminated Piezopolymer Plates for Torsion and Bending Sensors and Actuators,’’J. Acoust. Soc. Am., 85:2432-2439.
Liang, C., Sun, F.P. and Rogers, C.A.1994. ‘‘Coupled Electromechanical Analysis of Adaptive Material Systems-Determination of the Actuator Power Consumption and System Energy Transfer,’’J. Intell. Mater. Syst. Struct. , 5:12-20.
21.
Park, Y.E.1990. ‘‘Crack Extension Force in a Piezoelectric Material,’’J. Appl. Mech., 57:647-653.
22.
Park, G., Farrar, C.R., Lanza di Scalea, F. and Coccia, S.2006. ‘‘Performance Assessment and Validation of Piezoelectric Active-sensors in Structural Health Monitoring,’’Smart Mater. Struct., 15:1673-1683.
23.
Park, J.M., Kim, D.S. and Han, S.B.2000. ‘‘Properties of Interfacial Adhesion for Vibration Controllability of Composite Materials as Smart Structures,’’ Comp. Sci. Tech., 60:1953-1963.
24.
Qing, X.P., Chan, H.L., Beard, S.J., Ooi, T.K. and Marotta, S.A.2006. ‘‘Effect of Adhesive on the Performance of Piezoelectric Elements Used to Monitor Structural Health,’’Int. J. Adhes. Adhes, 26:622-628.
25.
Reddy, J.N.1999. ‘‘On Laminated Composite Plates with Integrated Sensors and Sensors,’’ Eng. Struct., 21:568-593.
26.
Schulz, M.J., Pai, P.F. and Inman, D.J.1999. ‘‘Health Monitoring and Active Control of Composite Structures Using Piezoelectric Patches,’’ Comp. Part B, 30:713-725.
27.
Seeley, C.E. and Chattopadhyay, A.1996. ‘‘Modeling Delaminations in Smart Composite Laminates,’’ In: 37th AIAA/ASME/ASCE/ AHS/ASC Structures, Structural Dynamics and Materials Conference, pp. 109-119, Salt Lake City, UT, April 18-19.
28.
Sun, D.C., Tong, L. and Atluri, S.N.2001. ‘‘Effects of Piezoelectric Sensor/Sensor Debonding on Vibration Control of Smart Beams,’’Int. J. Solids Struct., 38:9033-9051.
29.
Tani, J., Takaga, T. and Qiu, J.1998. ‘‘Intelligent Material Systems: Application of Functional Materials,’’ Appl. Mech. Rev., 51:505-521.
30.
Tauchert, T.R.1992. ‘‘Piezothermoelastic Behavior of a Laminated Plate,’’J. Therm. Stress., 15:25-37.
31.
Tong, L., Sun, D.C. and Atluri, S.N.2001. ‘‘Sensing and Actuating Behaviors of Piezoelectric Layers with Debonding in Smart Beams,’’ Smart Mater. Struct., 10:713-723.
32.
Tylikowski, A.2001. ‘‘Effects of Piezosensor Delamination on the Transfer Functions of Vibration Control Systems,’’Int. J. Solids Struct., 38:2189-2202.
33.
Wang, X.D. and Huang, G.L.2006. ‘‘The Coupled Dynamic Behavior of Piezoelectric Sensors Bonded to Elastic Media,’’J. Intell. Mater. Syst. Struct., 17:883-894.
34.
Wang, X.D. and Meguid, S.A.2000. ‘‘On the Electroelastic Behavior of a Thin Piezoelectric Sensor Attached to an Infinite Host Structure,’’Int. J. Solids Struct., 37:3231-3252.
35.
Wang, B.-T. and Rogers, C.A.1991. ‘‘Laminate Plate Theory for Spatially Distributed Induced Strain Sensors,’’J. Comp. Mater., 25:433-452.
36.
Xu, Y.G. and Liu, G.R.2002. ‘‘A Modified Electromechanical Impedance Model of Piezoelectric Actuator-Sensor for Debonding Detection of Composite Patches,’’J. Intell. Mater. Syst. Struct., 13:389-396.
37.
Zou, Y., Tong, L. and Steven, G.B.2000. ‘‘Vibration-based Model-dependent Damage (delamination) Identification and Health Monitoring for Composite Structures - A Review,’’J. Sound Vib., 230:357-378.
