This article outlines new low-cost hardware set-ups as viable substitutes for conventionally employed cost-intensive impedance analyzers/LCR meters for implementation of the electro-mechanical impedance (EMI) technique for SHM/NDE. The proposed solutions warrant basic low-cost equipment, such as function generator and digital multimeter, which are commonly available in most laboratories. Unlike the case of impedance analyzers/LCR meters, only the absolute admittance (i.e., magnitude) is measured. A simple computational approach is outlined for effective utilization of the absolute admittance function for SHM after filtering the passive component. Comparison of results with LCR measurements shows that the measurement accuracy of the proposed set-up is fairly good, repeatability excellent, and the damage sensitivity comparable to that of the cost-intensive conventional hardware. The proposed adaptation is, therefore a suitable candidate for the widespread industrial applications of the EMI technique.
Agilent Technologies 2008. Test and Measurement Catalogue, USA.
2.
Ayres, J.W., Lalande, F., Chaudhry, Z. and Rogers, C.A.1998. ``Qualitative Impedance-Based Health Monitoring of Civil Infrastructures,'' Smart Materials and Structures, 7(5):599-605.
3.
Bhalla, S., Naidu, A.S.K. and Soh, C.K.2002. ``Influence of Structure-Actuator Interactions and Temperature on Piezoelectric Mechatronic Signatures for NDE,'' In: Proc. of ISSS-SPIE International Conference on Smart Materials, Structures and Systems, 12-14 December, Bangalore, pp. 213-219.
4.
Bhalla, S. and Soh, C.K.2003. ``Structural Impedance Based Damage Diagnosis by Piezo-Transducers ,'' Earthquake Engineering and Structural Dynamics, 32(12):1897-1916.
5.
Bhalla, S. and Soh, C.K.2004a. ``Structural Health Monitoring by Piezo-Impedance Transducers: Modeling,'' Journal of Aerospace Engineering, ASCE, 17(4):154-165.
6.
Bhalla, S. and Soh, C.K.2004b. ``Structural Health Monitoring by Piezo-Impedance Transducers: Applications,'' Journal of Aerospace Engineering, ASCE, 17(4):166-175.
7.
Bhalla, S. and Soh, C.K.2004c. ``Impedance Based Modeling for Adhesively Bonded Piezo-Transducers ,'' Journal of Intelligent Material Systems and Structures , 15(12):955-972.
8.
Filho, J. and Baptista, F.A.2008. ``New Impedance Measurement System for PZT Based Structural Health Monitoring,''IEEE Transactions on Instrumentation & Measurements (in press).
9.
Giurgiutiu, V., Reynolds, A. and Rogers, C.A.1999. ``Experimental Investigation of E/M Impedance Health Monitoring for Spot-Welded Structural Joints,'' Journal of Intelligent Material Systems and Structures, 10(10):802-812.
10.
Giurgiutiu, V. and Zagrai, A.N.2002. ``Embedded Self-Sensing Piezoelectric Active Sensors for On-Line Structural Identification,'' Journal of Vibration and Acoustics, ASME, 124:116-125.
11.
Grisso, B.L. and Inman, D.J.2008. ``Autonomous Hardware Development for Impedance-based Structural Health Monitoring,'' Smart Structures and Systems , 4(3):305-318.
12.
Kim, J., Grisso, B.L., Ha, D.S. and Inman, D.J.2007. ``An All-Digital Low-Power Structural Health Monitoring System,'' In: Proc. IEEE Conference on Technologies for Homeland Security, Woburn, MA, pp. 123-128.
13.
Liang, C., Sun, F.P. and Rogers, C.A.1994. ``Coupled ElectroMechanical Analysis of Adaptive Material Systems-Determination of the Actuator Power Consumption and System Energy Transfer,'' Journal of Intelligent Material Systems and Structures , 5(1):12-20.
14.
Mascarenas, D.L., Todd, M.D., Park, G. and Farrar, C.R.2007. ``Development of an Impedance-based Wireless Sensor Node for Structural Health Monitoring''Smart Materials and Structures , 16(6):2137-2145.
15.
Overly, T.G., Park, G., Farinholt, K.M. and Farrar, C.R.2008. ``Development of an Extremely Compact Impedance-based Wireless Sensing Device,''Smart Materials and Structures , 17(6) (in press).
16.
Panigrahi, R., Bhalla, S. and Gupta, A.2008. ``A Cost-Effective Variant of Electromechanical Impedance Technique for Structural Health Monitoring,''Experimental Techniques (in press).
17.
Park, G., Cudney, H.H. and Inman, D.J.2000. ``Impedance-Based Health Monitoring of Civil Structural Components,'' Journal of Infrastructure Systems, ASCE, 6(4):153-160.
18.
Park, G., Overly, T.G., Nothnagel, M.J., Farrar, C.R., Mascarenas, D.M. and Todd, M.D.2006. ``A Wireless Active-Sensor Node for Impedance-based Structural Health Monitoring,''Los Alamos National Laboratory, LA-UR-06-5735, Los Alamos, NM.
19.
Park, G., Sohn, H., Farrar, C.R. and Inman, D.J.2003. ``Overview of Piezoelectric Impedance-Based Health Monitoring and Path Forward,'' The Shock and Vibration Digest, 35(5):451-463.
20.
Peairs, D.M., Park, G. and Inman, D.J. (2004). ``Improving Accessibility of the Impedance-Based Structural Health Monitoring Method,'' Journal of Intelligent Material Systems and Structures, 15(2):129-139.
21.
PI Ceramic2008. Product Information Catalogue, Lindenstrabe, Germany, http://www.piceramic.de
22.
Saffi, M. and Sayyah, T.2001, ``Health Monitoring of Concrete Structures Strengthened with Advanced Composite Materials Using Piezoelectric Transducers, '' Composites Part B: Engineering, 32(4):333-342.
23.
Soh, C.K., Tseng, K.K.H., Bhalla, S. and Gupta, A.2000. ``Performance of Smart Piezoceramic Patches in Health Monitoring of a RC Bridge,'' Smart Materials and Structures , 9(4):533-542.
24.
Sun, F.P., Chaudhry, Z., Rogers, C.A., Majmundar, M. and Liang, C.1995. ``Automated Real-Time Structure Health Monitoring via Signature Pattern Recognition,'' In: Proc. SPIE Conference on Smart Structures and Materials, San Diego , California, February 27-Mar 1, 2443:236-247.
25.
Wang, S. and You, C.2008. ``A Circuit Design for Impedance-based Structural Health Monitoring,'' Journal of Intelligent Material Systems and Structures, 19(9):1029-1040
26.
Winston, H.A., Sun, F. and Annigeri, B.S.2001. ``Structural Health Monitoring with Piezoelectric Active Sensors,'' Journal of Engineering for Gas Turbines and Power, ASME, 123(2):353-358.
27.
Xu, B. and Giurgiutiu, V.2005. ``A Low-Cost and Field Portable Electromechanical (E/M) Impedance Analyzer for Active Structural Health Monitoring,'' In: Proc. 5th International Workshop on Structural Health Monitoring , Stanford University, September 15-17.
28.
Xu, Y.G. and Liu, G.R.2002. ``A Modified Electro-Mechanical Impedance Model of Piezoelectric Actuator-Sensors for Debonding Detection of Composite Patches, '' Journal of Intelligent Material Systems and Structures, 13(6):389-396.
