Sage Journals: Discover world-class research

Abstract

This study investigates the use of macro-fiber composite (MFC) actuators to compensate thermal deformation in composite structures. The specific objective is to determine if MFC actuators bonded on the surface of a composite plate have the ability when actuated to counteract thermally induced deformations. Both finite-element analyses and experiments are presented. First, the response of an aluminum plate and a unidirectional composite plate both subjected to a MFC actuator is predicted. Next, the response of an unsymmetric composite plate with two MFC actuators bonded on the surface is studied. In the first step, a uniform temperature change is applied which induces a large change in the structure shape due to the laminate's unsymmetric nature. In the second step, the MFCs are actuated to compensate the thermally induced distortion. The results show that MFC actuators can eliminate thermal deformations when a proper amount of voltage is applied. Finally, a series of experiments are conducted to study the piezoelectric effects and provide data to compare with the finite-element results. Correlation between experiments and simulations is excellent.

Keywords

thermal deformation piezocomposite MFC compensation finite element.

Get full access to this article

View all access options for this article.

References

Agrawal, B.N. and Treanor, K.E. 1999. ``Shape Control of a Beam using Piezoelectric Actuators ,'' Smart Materials and Structures, 8(6):729—740.

Ashida, F. and Tauchert, T.R. 2001. ``A General Plane-stress Solution in Cylindrical Coordinates for a Piezothermoelastic Plate ,'' International Journal of Solids and Structures, 38(28—29):4969—4985.

Bent, A.A. 1997. Active Fiber Composite for Structural Actuation, PhD Thesis , Massachusetts Institute of Technology .

Bruch, J.C. , Sloss, J.M. , Adali, S. and Sadek, I.S. 2000. `` Optimal Piezo-actuator Locations/Lengths and Applied Voltage for Shape Control of Beams ,'' Smart Materials and Structures, 9(2):205—211.

Koconis, D. , Kollar, L. and Springer, G. 1994a. ``Shape Control of Composite Plates and Shells with Embedded Actuators I. Voltages Specified,'' Journal of Composite Materials , 28(5):415—458.

Koconis, D. , Kollar, L. and Springer, G. 1994b. ``Shape Control of Composite Plates and Shells with Embedded Actuators II . Desired Shape Specified,'' Journal of Composite Materials, 28(5):459—482.

Moses, R.W. , Weiseman, C.D. , Bent, A.A. and Pizzochero, A.E. 2001. `` Evaluation of New Actuators in a Buffet Loads Environment ,'' In: Proceedings of the SPIE 8th Annual International Symposium on Smart Structures and Materials , Vol. 4332, pp. 10—21, Newport Beach, CA.

Schultz, M.R. and Hyer, M.W. 2003. ``Snap-through of Unsymmetric Cross-ply Laminates using Piezoceramic Actuator ,'' Journal of Intelligent Material Systems and Structures, 14:795—814.

Smart Materials Corporation, www.smart-material.com

10.

Sodano, H.A. , Park, G. and Inman, D.J. 2004. ``An Investigation into the Performance of Macro-Fiber Composites for Sensing and Structural Vibration Applications , '' Mechanical Systems and Signal Processing, 18(3):683—697.

11.

Song, G. , Zhou, X. and Binienda, W. 2004. ``Thermal Deformation Compensation of a Composite Beam using Piezoelectric Actuators ,'' Smart Materials and Structures , 13(1):30—37.

12.

Sun, D. and Tong, L. 2005. ``Design Optimization of Piezoelectric Actuator Patterns for Static Shape Control of Smart Plates ,'' Smart Materials and Structures, 14(6):1353—1362.

13.

Tan, D. 2001. ``Compensation for Thermal Deformation of a Paraboloid Shell using Distributed Structural Actuation ,'' International Journal of Solids and Structures, 38(17):2893—2919.

14.

Wilkie, W.K. , Bryant, G.R. , High, J.W. , Fox, R.F. , Hellbaum, R.F. , Jalink, A. , Little, B.D. and Mirick, P.H. 2000. `` Low-cost Piezocomposite Actuator for Structural Control Applications ,'' In: Proceedings of the SPIE 7th Annual International Symposium on Smart Structures and Materials , Vol. 3991, pp. 323—334, Newport Beach, CA.

15.

Williams, R.B. 2004. Nonlinear Mechanical and Actuation Characterization of Piezoceramic Fibre Composites, PhD Thesis, Virginia Polytechnic Institute and State University .

16.

Williams, R.B. , Park, G. , Inman, D.J. and Wilkie, W.K. 2002. `` An Overview of Composite Actuators with Piezoceramic Fiber ,'' In: Proceedings of the 20th International Modal Analysis Conference, Vol. 47531, pp. 421—427, Los Angeles, CA.

Compensation of Thermally Induced Distortion in Composite Structures using Macro-fiber Composites

Abstract

Keywords

Get full access to this article

References