Sage Journals: Discover world-class research

Abstract

A novel damage identification procedure is presented that is ideally suited for long-term structural health monitoring of large civil structures. The procedure is based on the redistribution of dead load stress that occurs in a structure when damage takes place. The damaged structure is modeled using finite elements, in which the damage is represented by a section of reduced flexural rigidity. Forward analyses are first presented to show how the dead load is redistributed for different damage scenarios. The inverse damage identification problem is set up as a constrained optimization problem and solved using a real coded genetic algorithm. The proposed method correctly identified damage for a wide range of locations and damage severities. Results show that damage is difficult to identify when it is close to the inflection points of the structure, where the dead load strain is zero, and when the damage is not located between two sensors. The effect of measurement error is investigated.

Keywords

damage identification dead load frame finite element health monitoring genetic algorithm optimization static strain.

Get full access to this article

View all access options for this article.

References

Banan, M.R. , Banan, M.R. and Hjelmstad, K.D. 1994a. `` Parameter Estimation of Structures from Static Response, I: Computational Aspects ,'' Journal of Structural Engineering , 120(11): 3243—3258 .

Banan, M.R. , Banan, M.R. and Hjelmstad, K.D. 1994b. `` Parameter Estimation of Structures from Static Response, II: Numerical Simulation Studies ,'' Journal of Structural Engineering, 120(11): 3259—3283 .

Carden, E.P. and Fanning, P. 2004. `` Vibration Based Condition Monitoring: A Review,'' Structural Health Monitoring: An International Journal, 3(4): 355—377 .

Chajes, M.J. , Mertz, D.R. , Quiel, S. , Roecker, H. and Milius, J. 2005. ` `Steel Girder Fracture on Delaware's I-95 Bridge over the Brandywine River ,'' 2005 ASCE Structures Congress , ASCE, New York, New York.

Chang, F. 2005. `` Structural Health Monitoring 2005: Advancements and Challenges for Implementation ,'' In: Proceedings of the Fifth International Workshop on Structural Health Monitoring, Stanford, CA. DesTech Publications, Lancaster, PA, September 12—14, 2005.

Chou, J.H. and Ghaboussi, J. 2001. `` Genetic Algorithm in Structural Damage Detection,'' Computers and Structures, 79(14): 1335—1353 .

Doebling, S.W. , Farrar, C.R. , Prime, M.B. and Shevitz, D.W. 1996. ``Damage Identification and Health Monitoring of Structural and Mechanical Systems From Changes in their Vibration Characteristics: A Literature Review,'' Los Alamos National Laboratory Report, LA-13070-MS.

Eshelman, L. and Schaffer, J. 1993. Real-coded Genetic Algorithms and Interval Schemata, In: White, L. (ed.), Foundations of Genetic Algorithms, Vol. 2, pp. 187—202, Morgan Kaufmann Publisher, San Francisco .

Gen, M. and Cheng, R. 2000. Genetic Algorithms and Engineering Optimization, John Wiley & Sons, New York .

10.

Hjelmstad, K.D. and Shin, S. 1997. ` `Damage Detection and Assessment of Structures from Static Response ,'' Journal of Engineering Mechanics, ASCE, 123(6): 568—576 .

11.

Hu, X. 2002. Structural Damage Identification based on Static Dead Load Strain Measurements, PhD Dissertation, University of Delaware, Newark, Delaware .

12.

Hu, X. and Shenton III, H.W. 2005. `` Damage Identification Based on Dead Load Redistribution: Effect of Measurement Error ,'' ASCE Journal of Structural Engineering, 132(8): 1264—1273 .

13.

Kaufmann, E.J. , Connor, R.J. and Fisher, J.W. 2004. ``Failure Analysis of the US 422 Girder Fracture,'' Lehigh University , ATLSS Report No. 04-21, October 2004 .

14.

Lemaitre and Chaboche 1990. Mechanics of Solid Materials, Cambridge University Press, Cambridge, MA.

15.

Liu, P.L. and Chian, C.C. 1997. `` Parametric Identification of Truss Structures Using Static Strains ,'' Journal of Structural Engineering, 123(7): 927—933 .

16.

Michalewicz, Z. 1996. Genetic algorithm + Data Structure = Evolution Programs , 3rd edn, Springer-Verlag, New York .

17.

Pettit, R.B. 1993. ``Measurement Uncertainties in Structural Testing,'' In: Reese, R. and Kawahara, W. (eds), Handbook on Structural Testing, Ch. 14, pp. 319—330, Fairmont Press, Lilburn, GA .

18.

Sanayei, M. and Onipede, O. 1991. `` Damage Assessment of Structures Using Static Test Data ,'' AIAA Journal, 29(7): 1174—1179 .

19.

Sanayei, M. and Saletnik, M.J. 1996a. `` Parameter Estimation of Structures from Static Strain Measurements. I: Formulation ,'' Journal of Structural Engineering , 122(5): 555—562 .

20.

Sanayei, M. and Saletnik, M.J. 1996b. `` Parameter Estimation of Structures from Static Strain Measurements. II: Error Sensitivity Analysis ,'' Journal of Structural Engineering, 122(5): 563—572 .

21.

Shenton III, H.W. and Hu, X. 2005. `` Damage Identification Based on Dead Load Redistribution: Methodology ,'' ASCE Journal of Structural Engineering, 132(8): 1254—1263 .

22.

Sohn, H. , Farrar, C.R. , Hemez, F.M. , Shunk, D.D. , Stinemates, D.W. and Nadler, B.R. 2003. ``A Review of Structural Health Monitoring Literature: 1996—2001,'' Los Alamos National Laboratory Report, LA-13976-MS, 2003.

Dead Load Based Damage Identification Method for Long-term Structural Health Monitoring

Abstract

Keywords

Get full access to this article

References