In this article, the feasibility of using a circular microstrip patch antenna to measure strain and the effects of different materials on sensitivity of the patch antenna are investigated. Also, the effect of strain direction on the frequency shift is studied. The theoretical model shows a linear relationship between strain and the shift in the resonant frequency of the antenna in any material. Both finite element analysis (FEA) and experimental tests have been undertaken to corroborate the relationship between strain and frequency shift. In addition, a new antenna sensor based on a meandered microstrip patch antennas has been designed and tested to overcome the shortcomings of the circular patch. The meandered circular microstrip patch antenna exhibited a threefold increase in sensitivity and a fivefold reduction in its physical size, when compared to the simple circular patch. The ultimate intention of this work is to configure antennas for the detection of relatively small damage zones in structures and to do so wirelessly.
AuweraerHVPeetersB (2003) International research projects on structural health monitoring: An overview. Structural Health Monitoring2(4): 341–358.
2.
BalanisCA. (2005) Antenna Theory Analysis and Design. 3rd ed.New York: John Wiley.
3.
BoufriouaABenghaliaA (2006) Effects of the resistive patch and the uniaxial anisotropic substrate on the resonant frequency and the scattering radar cross section of a rectangular microstrip antenna. Aerospace Science and Technology10(3): 217–221.
ChangPCFlatauALiuSC (2003) Review paper: Health monitoring of civil infrastructure. Structural Health Monitoring2(3): 257–267.
6.
ChoiHChoiSChaH (2008) Structural health monitoring system based on strain gauge enabled wireless sensor nodes. In: 5th International Conference on Networked Sensing Systems (INSS 2008), Kanazawa, Japan17–19, June 2008, Print ISBN: 978-4-907764-31-9; doi: 10.1109/INSS.2008.461088810.1109/INSS.2008.4610888, pp. 211–214.
7.
ChuangJThomsonDJBridgesGE (2005) Embeddable wireless strain sensor based on resonant RF cavities. Review of Scientific Instruments76(9): 001–007.
8.
DeshmukhSMohammadITentzerisM. (2009) Crack detection and monitoring using passive wireless sensor. In: Proceedings of the ASME 2009 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS 2009), 21–23 September 2009, doi:10.1115/SMASIS2009-132610.1115/SMASIS2009-1326; ISBN: 978-0-7918-4897-5; Oxnard, CA, pp. 511–516.
9.
JiaYSunKAgostoFJ. (2006) Design and characterization of a passive wireless strain sensor. Measurement Science and Technology17(11): 2869–2876.
10.
KesavanAJohnSHerszbergI (2008a) Structural health monitoring of composite structures using artificial intelligence protocols. Journal of Intelligent Material Systems and Structures19(1): 63–72.
11.
KesavanAJohnSHerszbergI (2008b) Strain-based structural health monitoring of complex composite structures. Structural Health Monitoring7(3): 203–213.
12.
LiHCHBeckFDupouyOHerszbergI. (2006) Strain-based health assessment of bonded composite repairs. Composite Structures76(3): 234–242.
13.
ManciniSTuminoGGaudenziP (2006) Structural health monitoring for future space vehicles. Journal of Intelligent Material Systems and Structures17(7): 577–585.
14.
MatsuzakiRTodorokiA (2005) Wireless strain monitoring of tires using electrical capacitance changes with an oscillating circuit. Sensors and Actuators A: Physical119(2): 323–331.
15.
MatsuzakiRMelnykowyczMTodorokiA (2009) Antenna/sensor multifunctional composites for the wireless detection of damage. Composites Science and Technology69(15–16): 2507–2513.
16.
Silva-MunozRALopez-AnidoRA (2009) Structural health monitoring of marine composite structural joints using embedded fiber Bragg grating strain sensors. Composite Structures89(2): 224–234.
17.
SoontornpipitPFurseCMChungYC. (2006) Optimization of a buried microstrip antenna for simultaneous communication and sensing of soil moisture. IEEE Transactions on Antennas and Propagation54(3): 797–800.
18.
SpencerBFJrRuiz-SandovalMEKurataN (2004) Smart sensing technology: Opportunities and challenges. Structural Control and Health Monitoring11(4): 349–368.
19.
StaszewskiWJ (2000) Monitoring on-line integrated technologies for operational reliability – monitor. Air and Space Europe2(4): 67–72.
20.
StaszewskiWJBollerCTomlinsonGR (2004) Health Monitoring of Aerospace Structures: Smart Sensor Technologies and Signal Processing. 1st ed.Chichester: John Wiley.
21.
TanELPerelesBDShaoR. (2008) A wireless, passive strain sensor based on the harmonic response of magnetically soft materials. Smart Materials and Structures17(2): 01–06.
22.
TannerNAWaitJRFarrarCR. (2003) Structural health monitoring using modular wireless sensors. Journal of Intelligent Material Systems and Structures14(1): 43–56.
23.
TataUHuangHCarterRL. (2009) Exploiting a patch antenna for strain measurements. Measurement Science and Technology. 20(1): 01–07.
24.
UmbrechtFWendlandtMJunckerD. (2005) A wireless implantable passive strain sensor system. In: 2005 IEEE Proceedings of Sensors Conference, 30 October–3 November 2005, Print ISBN: 0-7803-9056-3; doi: 10.1109/ICSENS.2005.159762710.1109/ICSENS.2005.1597627, pp. 20–23.
25.
WattersDGJayaweeraPBahrAJ. (2002) Design and performance of wireless sensors for structural health monitoring. AIP Conference Proceedings615(1): 969–976.
26.
WongKL. (2002) Compact and Broadband Microstrip Antennas. 1st edn.New York: John Wiley.
27.
WuJYuanSJiS. (2009) Multi-agent system design and evaluation for collaborative wireless sensor network in large structure health monitoring. Expert Systems with Applications37(3): 2028–2036.
