Exploiting Functional Fibers in Advanced Composite Materials

Abstract

Magnetic fiber reinforced composite material is being developed which utilizes hollow glass fibers filled with active ferromagnetic material. The resulting material maintains structural integrity as is, providing a possible means of electrical power generation from a dynamically loaded structure. The hollow glass fibers are manufactured in-house using a bespoke fiber drawing facility. Hard magnetic powder materials are introduced into the hollow fiber cores to provide an active ferromagnetic function. The first part of this article discusses the ongoing work to manufacture, characterize, and optimize active magnetic fiber reinforced composite materials.

Recent advances in smart material actuators have led to the development of piezoceramic `patches' that utilize the piezoelectric effect of individual fibers encased in a protective environment. Previously, these patches have been either positioned on the surface or embedded within the structure, disrupting the composite lay-up. The second part of the article outlines a study of the feasibility of embedding piezoelectric fibers directly into a composite lay-up, thereby allowing a composite laminate to deform due to internal actuation. Potential improvements to the work have been identified and future work has been proposed to further understand and maximize the performance of integrated piezoelectric fiber composites.

Keywords

fiber composite magnetic piezoelectric.

Get full access to this article

View all access options for this article.

References

Chiriac, H. 2001. ``Preparation and Characterization of Glass Covered Magnetic Wires,'' Materials Science and Engineering, A304-306:166—171.

Chung, D.D.L. 2003. Composite Materials: Functional Materials for Modern Technologies, Chapter 9, Springer, London.

Dry, C. 1996. ``Procedures Developed for Self-repair of Polymer Matrix Composite Materials,'' Composite Structures, 35(3):263—269.

Glynne-Jones, P. , Beeby, S.P. and White, N.M. 2001. ``Towards a Piezoelectric Vibration-powered Microgenerator ,'' IEE Proc.-Science Measurement Techn., 148(2):68—72.

Harris, J. , Bond, I. , Weaver, P. and Wisnom, M. 2004. ``Improving Fibre Reinforced Plastics' Through-Thickness Properties Using Novel Shaped Fibres,'' Proc. IMechE: Pt.L - Journal Of Materials: Design And Applications, 218L1:29—35.

Holladay, J.D. , Jones, E.O. , Phelps, M. and Hu, J. 2002. ``Microfuel Processor for use in a Miniature Power Supply ,'' Journal of Power Sources, 108(1—2):21—27.

Hucker, M. , Bond, I. , Bleay, S. and Haq, S. 2003. ``Experimental Evaluation of Unidirectional Hollow Glass Fibre/Epoxy Composites under Compressive Loading,'' Composites A, 34(10):927—932.

Hucker, M. , Bond, I. , Foreman, A. and Hudd, J. 1999. ``Optimisation of Hollow Glass Fibres and their Composites ,'' Advanced Composites Letters, 8(4):181—189.

Humble, P.H. , Harb, J.N. and LaFollette, R. 2001. ``Microscopic Nickel-Zinc Batteries for use in Autonomous Microsystems,'' Journal of The Electrochemical Society , 148:A1357—A1361.

10.

Meninger, S. , Mur-Miranda, J.O. , Amirtharajah, R. , Chandrakasan, A.P. and Lang, J.H. 2001. ``Vibration-to-electric Energy Conversion,'' IEEE Trans. on Very Large Scale Integration (VLSI) Systems, 9(1):64—76.

11.

Mizuno, M. and Chetwynd, D.G. 2003. ``Investigation of a Resonance Microgenerator,'' Journal of Micromechanics and Microengineering, 13(2):209—216.

12.

Mulling, J. , Usher, T. , Dessent, B. , Palmer, J. , Franzon, P. , Grant, E. and Kingon, A. 2001. ``Load Characterisation of High Displacement Piezoelectric Actuators with Various End Conditions,'' Sensors and Actuators A-Physical, 94(1—2):19—24.

13.

Pang, J. and Bond, I. 2005. ``Hollow Fibre Reinforced Polymer Composite Encompassing Self-Healing and Enhanced Damage Visibility,'' Composites Science and Technology, 65(11—12): 1791—1799.

14.

Pang, J.W.C. and Bond, I.P. 2005. ``Bleeding Composites' - Damage Detection and Self-repair using a Biomimetic Approach,'' Composites Part A: Applied Science and Manufacturing, 36(2):183—188.

15.

Sakakibara, T. , Izua, H. , Shibata, T. , Tarui, H. , Shibata, K. , Kiyama, S. and Kawahara, N. 2002. ``Multi-source Power Supply System using Micro-photovoltaic Devices Combined with Microwave Antenna,'' Sensors and Actuators A, 95(2—3):208—211.

16.

Sheldahl Technical Materials. www.sheldahl.com

17.

Simpson, J.O. , Wise, S.A. , Bryant, R.G. , Cano, R.J. , Gates, T.S. , Hinkley, J.A. , Rogowski, R.S. and Whitley, K.S. 1998. ``Innovative Materials for Aircraft Morphing,'' In: Proceedings of the Society of Photo-Optical Instrumentation Engineers (SPIE) 3326:240—249.

18.

Simpson, J.O. , Wise, S.A. , Bryant, R.G. , Cano, R.J. , Gates, T.S. , Hinkley, J.A. , Rogowski, R.S. and Whitley, K.S. (1998). ``Innovative Materials for Aircraft Morphing,'' Materials Division, NASA Langley Research Centre.

19.

Singh, P. , Rajagopalan, J. , LaFollette, R. , Fennie, C. and Reisner, D.E. 2000, ``Fuzzy Logic-based Solar Charge Controller for Microbatteries ,'' In: 28th IEEE Photovoltaic Specialists Conference , pp. 1726—1729.

20.

Smart Material Corporation. www.smart-material.com

21.

Smith, R.C. and Ounaies, Z. 2000. ``A Model for Asymmetric Hysteresis in Piezoceramic Materials ,'' NASA Langley Research Centre NASA/CR-2000-209837.

22.

Sodano, H. , Magliula, E.A. , Park, G. and Inman, D.J. 2002. ``Electric Power Generation using Piezoelectric Devices ,'' In: 13th International Conference on Adaptive Structures and Technologies, Germany, 7—9 October.

23.

Tseng, K.K. and Wang, L. 2004. ``Smart Piezoelectric Transducers for in-situ Health Monitoring of Concrete,'' Smart Materials & Structures, 13(5):1017—1024.

24.

Whalen, S. , Thompson, M. , Bahr, D. , Richards, C. and Richards, R. 2003. ``Design, Fabrication and Testing of the P3 Micro Heat Engine,'' Sensors and Actuators A, 104(3):290—298.

25.

Williams, C.B. , Shearwood, C. , Harradine, M.A. , Mellor, P.H. , Birch, T.S. and Yates, R.B. 2001. ``Development of an Electromagnetic Micro-generator,'' IEE Proc.-Circuits Devices Systems, 148(6):337—342.

26.

Williams, R.B. , Park, G. , Inman, D.J. and Wilkie, W.K. 2002. ``An Overview of Composite Actuators with Piezoceramic Fibres,'' In: 20th IMAC Conference on Structural Dynamics, Proceedings Of IMAC-XX: Structural Dynamics, Vols I and II, 4—7 Feb 2002, pp. 421—427.

27.

Wlezien, R.W. , Horner, G.C. , Mcgowan, A.R. , Padula, S.L. , Scott, M.A. , Silcox, R.J. and Simpson, J.O. 1998a. ``The Aircraft Morphing Program,'' In: Proceedings of the Society Of Photo-Optical Instrumentation Engineers (SPIE), 3326:176—187.

28.

Wlezien, R.W. , Horner, G.C. , McGowan, A.R. , Padula, S.L. , Scott, M.A. , Silcox, R.J. and Simpson, J.O. 1998b. ``The Aircraft Morphing Program,'' In: 39th Structures, Structural Dynamics and Materials Conference and Exhibit , NASA Langley Research Centre.

29.

Yoon, K.J. , Shin, S. , Park, H.C. and Goo, N.S. 2002. ``Design and Manufacture of a Lightweight Piezo-compostie Curved Actuator,'' Smart Materials and Structures, 11(1):163—168.