Lightweight High Voltage Electronic Circuits for Piezoelectric Composite Actuators

Abstract

The purpose here is to enable peak-to-peak actuation of piezocomposite devices to perform shape control of structures, specifically bimorph variable-camber control surfaces on small aircraft. One of the major drawbacks in implementing control with piezocomposite actuation is its asymmetry in the positive and negative voltage directions. To remedy this situation, a novel, solid-state electrical circuit employing diodes and resistors is proposed. The circuit allows a single bipolar amplifier to control a bimorph composed of two piezoceramic composite actuators known as Macro-Fiber Composite (MFC). The MFCs have an asymmetric actuation range of -500 to 1500 V; hence an MFC bimorph with conventional serial or parallel electrical connection limits the actuation to the -500 to 500 V range. The proposed circuit allows the division of the input voltage so that: (1) The MFC that is in extension receives 1500 V, and (2) The MFC that is in compression receives -500 V. The circuit also allows the actuation in the opposite direction without any physical changes (i.e., not using any electromechanical switches) The input-output relationship of the circuit is characterized experimentally. An MFC bimorph is used to further demonstrate the capability of the circuit.

Keywords

Macro-Fiber Composite active composites bimorph morphing piezoelectric actuator.

Get full access to this article

View all access options for this article.

References

AM Power Systems. 2010. AM1505 P Type Converter. Available at: http://www.ampowersystems.net/thunder.htm .

AMI Electronics. 2010. T1505 Type Converter. Available at: http://www.amielectronics.com/Thunder_High_Voltage_DC_to_DC_Converters.html.

Bilgen, O. , Kochersberger, K. , Diggs, E.C. , Kurdila, A.J. and Inman, D.J. 2007a. ‘‘Morphing Wing Micro-Air-Vehicles via Macro-Fiber-Composite Actuators,’’ In: 48th AIAA/ASME/ASCE/ AHS/ASC Structures, Structural Dynamics, and Materials Conference, 23-26 March, Honolulu, Hawaii, AIAA- 2007-1785.

Bilgen, O. , Kochersberger, K. , Diggs, E.C. , Kurdila, A.J. and Inman, D.J. 2007b. ‘‘Morphing Wing Aerodynamic Control via Macro-Fiber-Composite Actuators in an Unmanned Aircraft,’’ In: AIAA Infotech @ Aerospace 2007 Conference and Exhibit, 7-10 May, Rohnert Park, CA, AIAA-2007-2741.

Bilgen, O. , Kochersberger, K.B. , Inman, D.J. and Ohanian, O.J. 2010. ‘‘Novel, Bidirectional, Variable-Camber Airfoil via Macro-Fiber Composite Actuators,’’ AIAA Journal of Aircraft, 47:303-314.

Hagood, N.W. , Kindel, R. , Ghandi, K. and Gaudenzi, P. 1993. ‘‘Improving Transverse Actuation Using Interdigitated Surface Electrodes,’’ In: SPIE North American Conference on Smart Structures and Materials, 8 September, Albuquerque, NM, Paper No. 1917-25 , pp. 341-352.

High, J.W. and Wilkie, W.K. 2003. ‘‘Method of Fabricating NASA-Standard Macro-Fiber Composite Piezoelectric Actuators,’’ Public Report , NASA/TM-2003-212427, ARL-TR-2833.

HV Component Associates. 2010. Product Sheet for SP5 L Type High Voltage Diode. Available at: http://www.deantechnology.com/pdf/download/Diodes.pdf.

Inman, D.J. and Cudney, H.H. 2000. ‘‘Structural and Machine Design Using Piezoceramic Materials A Guide for Structural Design Engineers,’’ Final Report , NASA Langley Research Center.

10.

Kim, D.K. and Han, J.H. 2006. ‘‘Smart Flapping Wing Using Macro-Fiber Composite Actuators,’’ In: Matsuzaki, Y. (ed.), SPIE 13th Annual International Symposium on Smart Structures and Materials, 26 February to 2 March, San Diego, CA, Vol. 617361730 F, pp. 1-9.

11.

Moses, R.W. , Weisman, C.D. , Bent, A.A. and Pizzochero, A.E. 2001. ‘‘Evaluation of New Actuators in a Buffet Loads Environment,’’ In: SPIE 8th Annual International Symposium on Smart Structures and Materials, 4-8 March, Newport Beach, CA.

12.

Park, J.-S. and Kim, J.H. 2005. ‘‘Analytical Development of Single Crystal Macro Fiber Composite Actuators for Active Twist Rotor Blades, ’’ Smart Materials and Structures, 14:745-753.

13.

Smart Material Gmbh. 2010. Product Sheet for MFC M8507-P1 Type Actuator. Available at: http://www.smartmaterial.us/media/Datasheet/MFC_ENG_WEB.pdf.

14.

Wilkie, W.K. , Bryant, G.R. and High, J.W. 2000 ‘‘Low-cost Piezocomposite Actuator for Structural Control Applications,’’ In: SPIE 7th Annual International Symposium on Smart Structures and Materials, 7 March, Newport Beach, CA.

15.

Wilkie, W.K. , Inman, D.J. , Lloyd, J.M. and High, J.W. 2006. ‘‘Anisotropic Laminar Piezocomposite Actuator Incorporating Machined PMN-PT Single-crystal Fibers, ’’ Journal of Intelligent Material Systems and Structures, 17:15-28.

16.

Williams, R.B. 2004. ‘‘Nonlinear Mechanical and Actuation Characterization of Piezoceramic Fiber Composites,’’ PhD Dissertation, Mechanical Engineering Department, Virginia Tech , Blacksburg, VA.