Application of CFD in the Design and Analysis of a Piezoelectric Hydraulic Pump

Abstract

The ability of smart materials to deliver large block forces in a small package while operating at high frequencies makes them extremely attractive for converting electrical power into mechanical power. This has led to the development of hybrid actuators consisting of co-located smart material actuated pumps and hydraulic cylinders. The overall success of the hybrid concept hinges on the effectiveness of the coupling between the smart material and the fluid. This study presents the results of two and three-dimensional (3D) simulations of fluid flow in a prototype hybrid actuator being developed for aerospace applications. The steady simulations show that losses in the device result primarily from three-dimensional effects like radial acceleration of the fluid in the pumping chamber, and the formation of vortex ring structures that block the flow. The effects of varying design parameters like pumping chamber height, discharge tube location, and discharge tube chamfer are explored and are found to have significant impacts on performance. Analytical expressions for the scaling of pressure losses with driving frequency are presented.

Keywords

CFD piezo-hydraulics actuators

Get full access to this article

View all access options for this article.

References

Bachtold, M. 1997. “Efficient 3D Computation of Electrostatic Fields and Forces in Microsystems,” Diss.Swiss Federal Institute of Technology Zurich .

Cadou, C. and Zhang, B. 2003. “Performance Modeling of a PiezoHydraulic Actuator” , Journal of Intelligent Material Systems and Structures, 14(3): 149–160 .

Fiore, G. , Redaelli, A. , Guadagni, G. , Inzoli, F. and Fumero, R. 2002. “Development of a New Disposable Pulsatile Pump for Cardiopulmonary Bypass: Computational Fluid-Dynamic Design and In Vitro Tests” , American Society for Artificial Internal Organs Journal, 48(3): 260–267 .

Fox, W. and McDonald, A. 1992. Introduction to Fluid Mechanics, John Wiley, New York .

Goto, A. , Nohmi, M. , Sakurai, T. and Sogawa, Y. 2002. “Hydrodynamic Design System for Pumps Based on 3-D CAD, CFD, and Inverse Design Method” , ASME Journal of Fluids Engineering, 124(2): 329–335 .

Goto, A. and Zangeneh, M. 2002. “Hydrodynamic Design of Pump Diffuser Using Inverse Design Method and CFD” , ASME Journal of Fluids Engineering, 124(2): 319–328 .

Hall, S. , Tzianetopoulou, T. , Straub, F. and Ngo, H. 2000. “Design and Testing of a Double X-frame Piezoelectric Actuator” , Proceedings of the SPIE-Smart Structures and Materials 2000: Smart Structures and Integrated Systems, 3985: 26–37 .

Hamkins, C. and Bross, S. 2002. “Use of Surface Flow Visualization Methods in Centrifugal Pump Design” , ASME Journal of Fluids Engineering, 124(2): 314–318 .

Hirsch, C. 1990. Numerical Computation of Internal and External Flows, John Wiley and Sons .

10.

John, S. and Cadou, C. 2005. “Unsteady Fluid Flow in Smart Material Actuated Fluid Pumps” , Proceedings of SPIE-Smart Structures and Materials 2005: Smart Structures and Integrated Systems, 5764: 703–714 .

11.

Kiris, C. , Kwak, D. , Rogers, S. and Chang, I.-D. 1997. “Computational Approach for Probing the Flow Through Artificial Heart Devices” , ASME Journal of Biomechanical Engineering, 119(4): 452–460 .

12.

Mauck, L. and Lynch, C. 1999. “Piezoelectric Hydraulic Pump” ,Proceedings of the SPIE-Smart Structures and Materials 1999: Smart Structures and Integrated Systems, 3668(2): 844–852 .

13.

Mauck, L. and Lynch, C. 2000. “Piezoelectric Hydraulic Pump Development” , Journal of Intelligent Material Systems and Structures, 11(10): 758–764 .

14.

Mauck, L. , Menchaca, J. and Lynch, C. 2000. “Piezoelectric Hydraulic Pump Development” , Proceedings of the SPIE-Smart Structures and Materials 2000-Industrial and Commercial Applications of Smart Structures Technologies, 3985: 729–739 .

15.

Mauck, L. , Oates, W. and Lynch, C. 2001. “Piezoelectric Hydraulic Pump Performance” , Proceedings of the SPIE-Smart Structures and Materials 2001-Industrial and Commercial Applications of Smart Structures Technologies, 4332: 246–253 .

16.

Munson, B. , Young, D. and Okiishi, T. 1990. Fundamentals of Fluid Mechanics, John Wiley and Sons, New York .

17.

Nasser, K. and Leo, D. 2000. “Efficiency of Frequency-Rectified Piezohydraulic and Piezopneumatic Actuation” , Journal of Intelligent Material Systems and Structures, 11(10): 798–810 .

18.

Newmark, N. 1959. “A Method of Computation for Structural Dynamics” , ASCE – Proceedings – Journal of the Engineering Mechanics Division, 85(n EM3, Part 1):67–94.

19.

Oates, W. and Lynch, C. 2001. “Piezoelectric Hydraulic Pump System Dynamic Model” , Journal of Intelligent Material Systems and Structures, 12(11): 737–744 .

20.

Oates, W. , Mauck, L. and Lynch, C. 2002. “System Dynamic Model of a Piezoelectric Hydraulic Pump” , Proceedings of SPIE-Smart Structures and Materials 2002: Modeling, Signal Processing and Control, 4693: 598–606 .

21.

Prechtl, E. and Hall, S. 1999. “Design of a High Efficiency, Large Stroke, Electromechanical Actuator” , Smart Materials and Structures, 8(1): 13–30 .

22.

Regelbrugge, M. , Lindler, J. and Anderson, E. 2003. “Design Model for Piezo-Hydraulic Actuators” , 44th AIAA/ASME/ASCE/AHS/ ASC Structures, Structural Dynamics and Materials Conference, 3: 2163–2171 .

23.

Samak, D. and Chopra, I. 1996. “Design of High Force, High Displacement Actuators for Helicopter Rotors” , Smart Materials and Structures, 5(1): 58–67 .

24.

Sano, T. , Yoshida, Y. , Tsujimoto, Y. , Nakamura, Y. and Matsushima, T. 2002. “Numerical Study of Rotating Stall in a Pump Vaned Diffuser” , ASME Journal of Fluids Engineering, 124(2): 363–370 .

25.

Sirohi, J. , Cadou, C. and Chopra, I. 2005. “Investigation of the Dynamic Characteristics of a Piezohydraulic Actuator” , Journal of Intelligent Material Systems and Structures, 16(6): 481–492 .

26.

Sirohi, J. and Chopra, I. 2003. “Design and Development of a High Frequency Piezoelectric-Hydraulic Hybrid Actuator” , Journal of Intelligent Material Systems and Structures, 14(3): 135–147 .

27.

Straub, F. and Merkley, D. 1995. “Design of Smart Material Actuator for Rotor Control” , Proceedings of SPIE-Smart Structures and Materials 1995: Smart Structures and Integrated Systems, 2443: 89–104 .

28.

Vinokur, M. 1983. “On One-Dimensional Stretching Functions for Finite-Difference Calculations” , Journal of Computational Physics, 50(2): 214–234 .

29.

Yu, T.-Y. , Soni, B.K. and Shih, M.-H. 1995. “Geometry Modeling and Grid Generation using 3D NURBS Control Volume” , Proceedings of the NASA Workshop on Surface Modeling, Grid Generation, and Related Issues in Computational Fluid Dynamic (CFD) Solutions, 3291: 491-491 .