Performance Characterization of In-plane Electro-thermally Driven Linear Microactuators

Abstract

Static and dynamic electro-mechanical performance of a microactuator is a key factor in the functioning of an integrated microsystem composed of moving components such as optical shutters/switches, micropumps, microgrippers, and microvalves. Therefore, the development of such systems primarily focuses on the overall design and parameter optimization of an actuator as the major driving element with respect to the desired performance parameters, e.g., displacement, force, dimensional constraints, material, actuation principle, and method of fabrication. This study presents results on the static and dynamic electro-mechanical performance analysis of an in-plane electro-thermally driven linear microactuator. Each microactuator, having a width of 2220 mm and made of 25 mm thick nickel foil, consisted of a pair of cascaded structures. Connecting several actuation units in a series formed each cascaded structure. Several microactuators with a different number of actuation units were fabricated using the laser micromachining technology. The static performance of these microactuators was evaluated with respect to the maximum linear output displacements, actual resistance, applied current, and consumed electric power. The maximum displacements varied approximately from 3 to 44 mm, respectively, depending on the number of actuation units. The dynamic performance was studied as a response function on constant applied current with respect to the output displacements. In addition, the response time was evaluated for different applied currents and for actuators with 2, 4, and 6 actuation units. The microactuators’ performance results are promising for applications in MEMS/MOEMS, microfluidic, and microrobotic devices.

Keywords

microactuator in-plane motions electro-thermal actuation laser fabrication static and dynamic electro-mechanical performance

Get full access to this article

View all access options for this article.

References

Bordatchev, E. , Nikumb, S. and Hsu, W. 2002. “Fabrication of Long-stretch Microdrive for MEMS Applications by Ultra Precision Laser Micromachining,” In: Proceedings of the Canada-Taiwan Workshop on Advanced Manufacturing Technologies, September 23-24, London, Ontario, Canada, pp. 243-251 .

Bordatchev, E. V. and Nikumb, S. K. 2005. “Electro-thermally Driven Microgrippers for MEMS Applications,” Journal of Microlithography, Microfabrication, and Microsystems, 4(2): 023011-023011, 7-7 pp.

Bordatchev, E. , Nikumb, S. and Hsu, W. 2004. “Laser Micromachining of the Miniature Functional Mechanisms, in Photonics North 2004: Photonic Applications in Astronomy, Biomedicine, Imaging, Materials Processing, and Education,” In: Proceedings of SPIE, SPIE, Bellingham, WA , Vol. 5578, pp. 579-588 .

Braun, A. and Zimmer, K. 2001. “Fabrication of MEMS Structures by Laser Micromachining,” In: Proceedings of SPIE, Vol. 4236, pp. 213-221 .

Comtois, J. , Bright, V. and Phipps, M. 1995. “Thermal Microactuators for Surface-micromachining Processes,” Processing of the SPIE, 2642: 10-21 .

Cragun, R. and Howell, L. L. 1999. “Linear Thermal-Mechanical Microactuators,” ASME, IMECE MEMS, pp. 181-188 .

Cverna, F. 2002. Thermal Properties of Metals, ASM International, Materials Park, Ohio , ISBN: 0-87170-768-3.

Debeda, H. , Freyhold, T. , Mohr, J. , Wallrabe, U. and Wengelink, J. 1999. “Development of Miniaturized Piezoelectric Actuators for Optical Applications Realized Using LIGA Technology,” J. MEMS, 8(3): 258-263 .

Gianchandani, Y. B. and Najafi, K. 1996. “Bent-beam Strain Sensors,” J. Micromech. Microeng., 5(1): 52-58 .

10.

Grade, J. , Jerman, H. and Kenny, T. 2003. “Design of Large Deflection Electrostatic Actuators,” J. MEMS, 12(3): 335-343 .

11.

Guckel, H. , Klein, J. , Christerson, T. , Skrobis, K. , Laudon, M. and Lovell, E. G. 1992. “Thermo-magnetic Metal Flexure Actuators,” In: Technical Digest, Solid State Sensors and Actuators Workshop, Hilton Head, SC, pp. 73-75 .

12.

Harness, T. and Syms, R. R. A. 2000. “Characteristic Modes of Electrostatic Comb-drive X-Y Microactuators,” Journal of Micromechanics and Microengineering, 10: 7-14 .

13.

Hickey, R. , Kujath, M. and Hubbard, T. 2002. “Heat Transfer Analysis and Optimization of Two-beam Microelectromechanical Thermal Actuators,” J. Vac. Sci. Technol. A, 20: 971-974 .

14.

Hsu, T.-R. 2002. MEMS & Microsystems: Design and Manufacturing, McGraw-Hill, New York .

15.

Hsu, C. , Tai, W. and Hsu, W. 2002. “Design and Analysis of an Electro-thermally Driven Long-stretch Micro Drive with Cascaded Structure,” In: Proceedings of IMECE2002 ASME International Mechanical Engineering Congress and Exposition, November 17-22, 2002, New Orleans, Louisiana, USA, pp. 235-240 .

16.

Huang, Q. and Lee, K. 1999. “Analysis and Design of Polysilicon Thermal Flexure Actuator,” J. Micromech. Microeng., 9: 64-70 .

17.

Juvinall, R. and Marshek, K. 1991. Fundamentals of Machine Components Design, 2nd edn, John Wiley & Sons, Inc. , pp. 186-190.

18.

Klaassen, E. H. , Peterson, K. , Noworolski, M. , Logan, J. , Maluf, N. , Brown, J. , Storment, C. , McCulley, W. and Kovacs, G. 1995. “Silicon Fusion Bonding and Deep Reactive Ion Etching: A New Technology for Microstructures Transducers’95,” In: 8th Int. Conf. on Solid-State Sensors and Actuators, and Eurosensors IX, Stockholm, Sweden, pp. 25-29 .

19.

Koester, D.A., Mahadevan, R., Hardy, B. and Markus, K. MUMPs Design Handbook, Revision 7.0 (Triangle Park, NC: Cronos Integrated Microsystems).

20.

Lai, Y. , McDonald, J. , Kujath, M. and Hubbard, T. 2004. “Force, Deflection and Power Measurements of Toggled Micro Thermal Actuators,” J. Micromech. Microeng., 14: 49-56 .

21.

Luo, J. K. , Flewitt, A. J. , Spearing, S. M. , Fleck, N. A. and Milne, W. I. 2004. “Modelling of Microspring Thermal Actuator,” In: Proceedings of the NSTI Nanotechnology Conference and Trade Show, pp. 355-358 .

22.

Luo, J. K. , Flewitt, A. J. , Spearing, S. M. , Fleck, N. A. and Milne, W. I. 2005. “Three Types of Planar Structure Microspring Electro-thermal Actuators with Insulating Beam Comstrains,” J. Micromech. Microeng., 15: 1527-1535 .

23.

Que, L. , Park, J. and Gianchandani, Y. B. 2001a. “Bent-beam Electrothermal Actuators: Part I. Single Beam and Cascaded Devices,” J. MEMS, 10: 247-254 .

24.

Que, L. , Park, J.-S. and Gianchandani, Y. B. 2001b. “Bent-Beam Electrothermal Actuators - Part I: Single Beam and Cascaded Devices,” J. Micromech. Microeng., 10(2): 247-253 .

25.

Sinclair, M. J. 2000. “AHighForceLowAreaMEMSThermalActuator,” In: Inter. Society Conf. on Thermal phenomena, pp. 127-132 .

26.

Syms, R. R. A. , Zou, H. and Stagg, J. 2004. “Robust Latching MEMS Translation Stages for Microoptical Systems,” J. Micromech. Microeng., 14: 667-674 .

27.

Williams, K. , Maluf, N. , Fuller, N. , Barron, R. , Jaeggi, D. and van Drieenhuizen, B. 1999. “A Silicon Microvalve for the Proportional Control of Fluids,” In: 10th Int. Conf. on Solid-state Sensors and Actuators (Transducers’ 99), Sendai, Japan, pp. 1804-1807 .

28.

Ye, W. , Mukherjee, S. and MacDonald, N. 1998. “Optimal Shape Design of an Electrostatic Comb Drive in Microelectromechanical Systems,” J. MEMS, 7(1): 16-26 .